Mushrooms care and feeding 2: monotub assembly, filters and lining.

Подписаться 21 тыс.

Просмотров 49 тыс.

50% 1

You should be done with your monotub prep in 20 minutes or less - all you need are some holes, a drill saw and micropore tape. This way, nothing can hurt your babies!
#mushrooms #mushroomfarm #local #localfarm #eatlocal #farmlife #mushlove #culinary #oystermushrooms #lionsmanemushroom #growyourownfood #boulder #denver #urbanfarmboulder #urbanfarmdenver #mushroomspawn #mushroomsofinstagram #growingmushrooms #sporetotable #fungi #humblefungus #mycology #fungiculture

Развлечения

Опубликовано:

11 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 154

@natashapeters4323 Год назад

I love the humor with which you teach. The explanations for why you do the things you recommend is spot on. Thank you!

@MoonWind32690 2 года назад

Helpful tip, when cutting shatter prone plastic with a hole saw run it in reverse once you have the pilot hole drilled. The friction cutting should greatly reduce the risk of cracking.

@GilaMonster971 22 дня назад

Also can put the hole saw bit on the stove to heat it up after the pilot hole is drilled. It’ll melt right through the plastic.

@soixantecroissants 3 года назад

You are a legend. Respect from the UK!

@electronicaeasy 19 дней назад

You explain the when and why like nobody else.❤

@middleway1885 2 года назад

Boop! Pure Bliss! Lol thanks for being you! Cheers! I really enjoy the funny bits, great for learning... plus the aspect of, "it's OK to mess up, just keep doing it and get results!"

@smokenjoe001 Год назад

I had to keep watching. At first, I thought he may have had a few too many of his own mushy. Until i was 20 min into his second video and realized I was actually listening and enjoying his video. Great work sir. 👏 I like your approach.

@frankyduroo7996 3 года назад

The huble fungus. You can't imagine how happy you make me with your videos! Nowhere is the explanation so clear. I am grateful to you humble fungus !!

@themyceliumnetwork 3 года назад

I have found that if you use a hair dryer on the hot setting & blow hot air at the area you are drilling out there is a much lower chance it will crack !

@ingolfurarnar697 3 года назад

I always put a very hot wet cloth over it for a minute before I drill :)

@fernetstock1 2 года назад

Just heat up a proper sized empty can, wear a glove and push through it.

@jonathanlamontagne1731 2 года назад

Thats just smart ;) thanks for it

@vxCOCOxv 2 года назад

Submerging the plastic in very hot water as well softens them up.

@MrFurley69 Год назад

Put a board on the other side of the plastic.

@iracarrera6829 2 года назад

This dry colorado air is no joke , thank you for answering humidity questions!

@balls78 11 месяцев назад

I love this guy! So funny, this is my sense of humor. He’s very thorough with information. I’ve learned allot! Thank you!

@EduardoGarcia-de7bh 2 года назад

If you don't want to break the tub when drilling the holes put a peces of wood behid the tub wall

@chrisjokinen217 2 года назад

With fragile plastics you can drill it in high speed, in reverse, and with light pressure. Use the friction to melt the hole through

@andymason703 Год назад

I have learned more about start-ups in a box than 100 videos I have seen before. Thank you.

@yeehawstudio3419 Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SzJFsvRGpZI.html

@sugardaddy4089 2 года назад

Dude!!!!. Your videos are AWESOME and you crack me up . THANK YOU

@ingolfurarnar697 3 года назад

DAMN!! That intro was a BLAST!!!! 👍👍👍 And great video btw 😊 Thanx 👍

@jamegumb6625 2 года назад

Thank You for sharing your knowledge my friend, it is greatly appreciated

@Erikwoods9682 3 года назад

Love the Liner idea💡

@robertstuehrenberg5719 6 месяцев назад

With all sincerity. I dig the intro. Love the content.

@donniedineronarrowmindedcu2692 2 года назад

Very informative! Thanks for sharing

@JR-di8fc 3 года назад

Lmao bro is tripping balls every video I love it

@omg_wtf 2 года назад

You're just my type of crazy. Thanks for the info, very helpful

@ronron4051 3 года назад

You’re awesome! Thanks so much!!

@ariannaclearday 2 года назад

You rule! I love the way you cut through the crap.

@Man-EatingMushroom 3 года назад

Dude you are so helpful!

@alexportlock891 3 года назад

I like your videos I’m going to support you

@shaggy6249 2 года назад

Pro tip when cutting plastic maybe do it outside, wear gloves and a mask, wash your tub down with some water and clean it with a towel. Micro plastics are real and I just watched a guy consume what seems to me like a lot of plastic in the span of 5 minutes

@adamdudley8736 Год назад

Unmodified gang! Simplicity is key and for me unmodified tubs seem to wok fantasticly. One of the reasons why I like using the tubs that I use is for this exact reason.. you don't have to modify it in any way. Only keep an eye and change/flip lid to give more or less FAE

@DaveWestGuitar Год назад

You give good information. Relax!

@ryanlopez4550 Год назад

the bag trick 10/10

@nervousgardensclub6423 2 года назад

i almost didn't wont to hit the like button bc it was on 420 lol so i was like 421 :) love videos buddy i always pick up something new in every video and your goofy so keeps me engaged unlike a lot of the dryer type videos from some others i wont mention but keep it going buddy

@simonfletcher352 Год назад

Very informative.Thank you

@shaunpaulwallace Год назад

lol Brilliant 👍🏻 🙏 🇬🇧

@Gr0und3dFlygon 2 года назад

Ur funny lol. Thanks for the info

@exultusgibb2690 3 года назад

Youre awesome dude

@Pateffs Год назад

Gotta love the epic intro!

@shamsrumi7182 7 месяцев назад

Excellentte Intro... 🤣🤣🤣🤣🤣

@stillmaninmotion168 Год назад

Dude I love your videos. I hope you can make some more

@yeehawstudio3419 Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SzJFsvRGpZI.html

@LightweightUK2007 3 года назад

Dude, this is hilarious :)

@loopgodjohansen Год назад

Thank you sir. I’ve got everything I need. Let’s begin.

@nigtturner 3 года назад

I like to hold a wooden block at the back when I drill my holes

@sirving1297 2 года назад

If you're drilling your holes I'd recommend a drill that plugs into the wall or is a newer model with a strong lithium battery. Those old battery powered drills like in this video have an extremely slow revolution speed. You will have a much easier time preventing cracking with a fast drill that you don't have to apply any pressure to.

@beverlytate2669 2 года назад

The ryobi is a great drill with powerful batteries. The tools have options. After 20 years of construction and as a master electrician, I have run through plenty of tools. I'd keep buying the ryobi kits all day.

@deanmerchant203 Год назад

I use battery only and they are awesome. The key is let the hole saw drill the hole and not try to shove it through.

@minkusmaz 11 месяцев назад

That's not true - corded drills can have speed controls. My Ryobi goes plenty fast for this

@-AbdulRahman 2 года назад

Very helpful

@rosiefolks8239 2 года назад

Love your videos! You seem so down to earth and fun. If you havent already figure this out, if you use a hair dryer or hot water on those stickers they will peel right off. Have an enlightened day!

@greatestytcommentator Год назад

Or 70% Iso.

@robertstuehrenberg5719 6 месяцев назад

Once the guide bid punctures the container you can run the drill in reverse to ensure you don’t crack it. You can also look for a hole saw with smaller teeth.

@kabar48 Год назад

I heat mine with a torch..and push a 1 inch dowel in. No cracks. Perfect holes everything. Easy does it. Not to much heat.

@brookeryan4612 4 месяца назад

I feel like you’re like the Alton Brown of shrooms

@kevinpainter7940 Год назад

Thanks this helped allot

@is68022 9 месяцев назад

i had to sub after watching that intro

@samshuijzen 3 года назад

Also respect from the Netherlands

@krashpass Год назад

For non shattering holes, use a small soup can heated up on the stove and press the open end into the plastic to melt a hole.

@yeehawstudio3419 Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SzJFsvRGpZI.html

@verbaldavenci1 2 года назад

This video makes it seem so simple but it's really not🤣😅😂 . Although because of your video it made me a heck of a lot better and now I've had much more consistent results so thank you🤝

@AbraxasTheSorcerer 2 года назад

I quit watching when he said "we're not making art, we're growing mushrooms." Brooo idk about you but growing mushrooms is an art 💯🤙🏼🍄

@gustavomcmillian7360 3 года назад

#Winning!

@MJ-gu6uu Год назад

So why do you prefer to drill holes near the top of the container? Unlike a lot of people do (just above the substrate level)

@johnlittle3410 6 месяцев назад

IF you run your hole saw in reverse it will be slow but will not crack the plastic, or put a 2x4 under the plastic and it want grab and crack

@soysauce2293 8 месяцев назад

Wana get clean holes on your mono get a small can of tomato paste and mark where you want your holes on the tub. Clean out the can and heat it over a stove or something hot like a hot plate outside if you can then just press the very hot can on the mark and it will melt a perfect hole everytime. Just dont breathe the fumes 😂

@brandonmitchell8905 2 года назад

This dude is winning

@mattharvey8712 3 года назад

Hey ........good trick run the drill backwards......cheers

@greatestytcommentator Год назад

I couldn't work in this room, those fans would send me into a trance after my 2nd IPA

@user-MrsYT 10 месяцев назад

i use unused facemask from the coronaage to cover the holes and it works nice :)

@richardknowles9212 8 месяцев назад

I use a small can heated up with a torch..much faster and no cracking

@CDCLLC2023 2 года назад

This was obviously magic mushroom day.

@honkhogan21M Год назад

With using the filter disks, do you put micropore tape over them or just use the disks?

@samiam9160 11 месяцев назад

Why do you recommend spraying the inside top of the lid? Water will drop down on top of the pins. It’s best to just do the sides only.

@Kamperkyle99 2 года назад

What about using perlite about 3 inches deep across the bottom? Can that facilitate enough humidity or does it give you a higher chance of contamination

@KerriEverlasting Год назад

You had me at random boogers.

@michellekim7585 3 года назад

Just out of curiosity…I wanted to start growing gourmet mushrooms to sell at the farmers market…what’s a good system to have to grow in bulk? Like how often should I be making grain, substrate, ect….just to have a good flow?

@l1fef0rm 2 года назад

Fun fact, if you don't have a drill with a fancy bit like that, but have a solder iron laying around. Use that to trace out your circle. Just do it outside because of the plastic fumes.

@andyfromtoystory7426 Год назад

Fun fact: Just eat the vegetables out of a can, put the can on your stove to heat up, and then it’ll melt a perfect hole in about 2 seconds. Reheat and repeat.

@bexyboy3719 Год назад

Great vid; you said you would explain why the holes are drilled high up on the tub…what’s your advice and reason for this? Cheers!

@kelseyevans8451 3 года назад

I know it’s better to have the FAE holes/filters, period, but for those using unmodified tubs(no drill), will this work about the same if it were just fanned more? Or..what would you suggest? Thanks in advance, I know you get asked tons of the same questions every day lol so I appreciate you taking the time to help a noob out! ;) love your personality btw, great vid loaded with great info! ❤️🍄

@theurbanthirdhomestead 2 года назад

Don't they say you can flip the lid over to allow airflow?

@garyloss2878 4 месяца назад

So, do you keep the mushrooms in the bag when you put it in the monotub?

@bizzaroscanada4797 4 месяца назад

about a aluminum baking tray cheep and disposable and sizes galore is aluminum a bad idea for the brick or medium new be here and thinking about indirect humidity injector so i can tube several tubs on a timer

@xj11w2c7 Год назад

Why don't people heat up their hole saw with a blowtorch?

@rose-tt9bl 3 года назад

Probably a stupid question but what about light and fruiting, will the lid pose a problem if all I have are purple grow lights

@lillydover3001 3 года назад

Hey, I think I recognize you from Reddit! You're the fella that scored that schweeeeet laminar flow hood and tried to burn your esophagus with the fumes of yesteryear, right? 😂 The algorithm suggested your channel. Good algorithm.

@ur_a_dissapointment2561 Год назад

Literally the best fucking channel...ever

@brandonalan8884 2 года назад

Just got like #420 wanna make sure know that was my work

@jessicahay9305 Год назад

You can use a heated foam knife to cut the holes np. They're like $10 at Walmart

@yeehawstudio3419 Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SzJFsvRGpZI.html

@Keepitreal260 Год назад

First 26 seconds on this channel got a like. 🤣

@neomage2021 Год назад

I find forstner bits work best. Basically never had a crack

@Ryan-in8gj Год назад

I use a torch to the bit and do it so it doesn't crack.

@silenteye989 Год назад

can you use a spade bit or drill saw

@shanegreer7749 2 года назад

Pro tip , put the drill in reverse once the pilot is started , never cracks that way !

@YouLeeBG 3 года назад

Growing mushrooms, IS ART ;)

@cjester3905 Год назад

ok ok lol.. apparently u all haven't done much wood working with a drill, u can do on high speed, quickly, doesn't need to be in reverse.. ok simple put a 2x4 or a large pc of wood under where u will be drilling... n drill .. done no cracks.. u have to apply some pressure to keep the plastic as close to the wood as possible... done... have done over 20+ tubs n have had no cracks ... good luck!!

@kevinpainter7940 Год назад

What if you use prevalite and sterilizing how would you sterilize it

@tiby Год назад

Is there any difference between using micropore tape and those filter patches?

@douglasr.c.5622 Год назад

Same-Same-

@sirving1297 2 года назад

I actually think that it is much easier for the home cultivator to grow in a cold and dry climate like Colorado because it is much easier to control heat/humidity by increasing it than it is to decrease it. When it is always cold and dry you have an easier baseline to work with than when it is almost always hot and humid but sometimes gets colder and less humid. You also are at a drastically higher risk of contamination in a hot/humid climate because of the much greater quantity of natural mold and fungus spores in the air.

@fakeshemp9599 2 года назад

I'm willing to bet you are right. I live in Colorado and I've had a pretty good run so far

@andyfromtoystory7426 Год назад

It’s wayyyyyyy easier to remove humidity than it is to add humidity to an entire room which is what he’s talking about.

@rueben1000 3 года назад

I’m growing my first batch of mushrooms using this monotub tek. It’s been 2 weeks since I spawned to bulk and I’m only at about 40% colonised. My colonisation temperature is 20c because I live in the U.K. Is it normal that it’s taking longer than 2 weeks?

@soixantecroissants 3 года назад

I have carried out a few gourmet mushroom grows this year in the UK. Only started my hobby in December! Another lockdown hobby. Anyway, I've had two successful runs but I am a beginner too so everything is brand new and I can't really be sure I am doing everything right. That said the first one took 17 days from spawn to bulk before showing pins. My second one has taken a lot longer (39 days) but has just shown results. I found this odd because I used more spawn on the second run. Anyway my guess is 1: it's something to do with the mycelium just needing longer to get to the right point. 2: I increased FAE too soon. 3: It's been really cold the past few weeks where I live, but suddenly past few days it's been warmer and that may have increased the humidity / temp conditions 4: Again maybe I should have waited before the pins showed up before I introduced light and FAE. Conclusion: as long as you don't have any signs of green mould or anything nasty then it's probably not too far off

@rueben1000 3 года назад

@@soixantecroissants oh wow thanks for this info! Moved my tub to a warm area and now I’m at 95% after 18 days! I was getting worried but were nearly there!

@brodenmacarthur3955 Год назад

Way late response but after many trials and errors. I use smaller tubs than the giant 66qt ones. I use about 1-2.5 or 3 ratio of grain spawn to substrate. Have good moisture content there are videos for that. I cover mix with bubble tape- bubbles facing bottom substrate. I have mycelium growth in 2 days. I had same problem - weeks before growth more chance for contamination- that’s no good. I am still learning and been doing it for over a year! 😂.

@otisbones Год назад

For anyone that's a perfectionist you can use a shaviv deburring tool to clean up cut edges. Not really worth purchase unless you're just weird like me.

@Richiebones 2 года назад

That's a 2 inch hole bit brother. 👍

@jameshsexton 3 года назад

francy pants 😆

@aidennymes6335 2 года назад

some already mentioned drilling the holes in reverse (friction drilling) but it should also be mentioned that you should hold a scrap piece of wood on the other side to press against to prevent the plastic from cracking

@jonnypage9484 2 года назад

Mono tubs are fucking weird only cuz you can go all out or keep it simple . The only thing I recommend a bag or piece of plastic for the mono tub top and make sure it covers the entire length of the opening then tape one side to the monotub itself and then tape the other side to the lid that way when it comes for fanning you can use your makeshift bag fan That's already sterilized That's been chilling in the environment . Not to mention when condensation sticks to the you can call it top lining whatever cracks there are end up causing water droplets to fall so it keeps the humidity an moisture a little better

@guardianofthesacredflame1649 2 года назад

How do you keep fungus gnats out of your tub?

@theurbanthirdhomestead 2 года назад

Good question!

@kikidee2u 2 года назад

subscribed Why not get $ for all those endorsements. I really like his hacks, views on shroom cultivation and videos Does anyone else think this guy is Marty Feldman's illegitimate son?