Mustang V6 Lower Intake Swaps. IMRC, Coolant direction, Overflow Burp Tube, Fitting Interchange 

Bravo! Thank you for this exciting video. Great content. Thanks again.

You're a true king for these videos. Giving us the info to help maintain our cars

I almost gave up on the 3.8-4.2 pushrod v6. Seeing your videos has given me a new approach for making this v6 more potent and efficient. I'm hooked and will began a project to put this engine into a 1955 old pickup. 👍

Paradox the king of mustang 3.9 v6 5speed got the 40th anniversary orange convertible

Brilliant! I'd love to see one on your opinions of the advantages, and disadvantages of the different intakes and swaps. I have a '01 3.8L that I've removed the EGR system, and bypass the pcv system with the help of super six motorsports, because of the BBK valve covers not having the baffle update, BBK shorty headers, with a Dynomax duel exhaust system, BBK throttle body, BBK cold air intake system, BBK oil catch can that I added for the pcv delete from a 2015 mustang, BBK firewall clutch cable adjuster, MSD coil pack, and currently hunting down the last part to switch my Nitrous Oxide Systems dry shot for a wet shot. (Basically hunting down the fuel solenoid). And I've tuned all this with a 93 octane Bama tune on my SCT-X4. I actually liked the response of the Airade throttle body spacer over the BBK throttle body, but it didn't fit the theme, or look as nice next to the BBK caster camber plates. Lol. Anyway I came across a '92 or '93 super coupe supercharged 3.8L for $50 for the whole motor, supercharger, and everything minus some of the fuel, and ignition parts, and almost did the swap before realizing what I had was better, and I'd basically be taking 2 steps back just to say it's supercharged and sold it. I've been considering doing a swap with the 3.9L and boaring it out to a 4.3L, or just dropping a 4.2L in it. Not sure if I'd have to get the computer from the 4.2L. I liked the idea or the Windstar upper intake plenum, and now curious of some of the swaps you were talking about, but before I make a huge decision I'd greatly appreciate your insight.

I don't see why the intakes wouldn't fit if I just cut a hole under the massive GT hood scoop some of us have.

Dude thank you

Another intake manifols only brings some 10HP extra.

I got a 3.8. Just popped that hose. Fun times

I would love to do this, however my 3.8 is going to be my daily and I live in a strict emissions state. Would you recommend to port my original intake, when I removed mine I noticed that the ports were about 3/8th of an inch smaller than the gaskets

Can you use the Freestar lower intake with the windstar upper manifold?

So my motor blew up can I just not pull a 4.2 motor and put it in my 2003 v6 new edge mustang

Aye man!! I just watch your videos for the first time and I'm glad I did!!! You provide a lot of information for this engine that I didn't know!! I do have a question. I have a 2000 mustang that came with the 3.8 in a manual and that engine blew. So I got an 04 3.9 engine for it. The old engine didn't have the IMRC and this one does. Would I have to get the ECU to run the intake? I have the harness from the 3.9 already. Or should I just run an intake without the IMRC?

love this man just watched it again.

Is there any performance gain swapping to the freestar upper and lower intake on a full bolt on v6? My son and I have added longtubes, catted x, magnaflow catback, 4.10s a CAI and SCT tune. We have a NX 75 shot ready to be installed as well. Also does the freestar have IMRC’s? Really loving your videos.

Having trouble making sure I use the right bolts in the right spots on lower intake?

Had to tear down my crate 3.8 due to my old lower intake warping from the old motor. (just found out this issue so I’m Swapping in a new lower intake) the 99-00 has no IMRC. if I was to replace my 01+ lower with the 99-00 one would I need to have a tune after since the 01+ engine knows it’s not there? What would the engine run like if I replaced the lower and didn’t tune it? Jw

Does the 3.9 v6 come with an oil cooler?

I want to see a 3.8 in a boat

Can I mount the upper intake of windstar with the lower manifold of mustang 3.8L 2001?

Do you remember the part number for the f150 burp tube

What happens to the IMRC? Will it cause a check engine code if left unplugged?

gotta get you, Mustang Man, NotAv8, Puny pony, buddyantunez1, Sébastien Forgetz, SlowSix, SaleenJ , datonev6mustang and mustangmelish together and set up a podcast id pay good money to see that haha! btw for anyone that doesn't know, those are the channels to check out for the meanest v6 sn95s of youtube.

Take that damn balance shaft out and throw it away. It’s an engine lifespan shortener.

Slow down plz

Okay, my 🧠 is STUFFED!!! Awesome. Till... tomorrow! Mwuahahahahahahahhhhh!!!!