I get it with computer calibration with displaycal and colormunki...it s Amazing 🎉 the color is so depth 12bits in 4k 24hz...the smooth memc is great at 8.
I’ve bought a Hisense C1 projector this week. It is a very nice device with a nice design and beautiful picture. I am concerned about the operating noise though. The normal noise level is not instrusive, but after a minutes or two of operation, the projector switches to a highter fan speed causing louder operation. Then, after spinning faster for 10-15 second, it goes back to normal speed. Then, after 15-20 second of operation the fan speeds up again. No source needs to run for the projector but only run the projector to observe this. De cooling fan has ups and downs Is it normal for the C1 or is it just my device?
Is your C1 at maximum brightness? That's the only thing I can think of. I didn't notice that spinning up of the fans every 10-15 seconds on my model. Might be worth chatting to Hisense technical support to see if it's a setting or something.
@@CreatedTech No, I have always in standard mode where the laser luminance then automatically comes out at value 8. So if I understand it correctly, in your case the fans run at the same speed and not fast and then slow like mine? Of course with movie sound you hardly hear the fans, but if you turn off the sound you hear the irregularity of the fans. At least that is the case with my model.
@@gr33n80 Have you listened without movie/ tv sound to the C1 fan whether it goes on and then off again? I returned the projector but saw on a site that someone experienced the same problem.
I did try it and I would much prefer a proper monitor. Would work well in some situations though, maybe like a presentation or second screen to consume media on while working.
You can go into the settings and manually adjust, but need to keep minimum distances in mind too e.g. if you’re too close you can’t get the maximum size.