Poštovani, želeo bi saradnju da se izmene iskustva. Ja radim na vodonik. Ja sam prvi u Svetu upalio fićin motor jo pre mnogo godina. I sa njim sam išao Niš Beograd Niš sa vrlo malo vode bez benzina.
Keep making these commentary videos plz you have a very good attitude towards this subject and as someone who feels very very passionate about this topic we need lots of like minded people to work towards the same thing and collaborate some how. Good work too thanks
Thanks Scott, just found you, right on i agree time we get together and get this problem solved. I had high hopes for that generator, Ill be following you. Pennsylvania.
@tectalabyss No, that was what the video said, as I recall. But it doesn't matter. Jeremy Feilding exposed the thing for what it is... which is a scam to get people to click and watch the video so they get ad revenue. Sorry to deliver the news! Hope you have a great day!
They only give you the secrets if you pay for the good membership its only 700 dollars. I suggest a few books with that money instead electrical theory for dummies is actually a great read and will explain alot of stuff about this motor.
@@UnifiedInfo really only 700$ to get secrets, then why if you offer then 1 million for working model they say no?? but will give working secrets for 700$. Think about it, its a scam.. If someone offered to sell you the winning lottery tickets for 700$ would you buy? But why would they give up millions and could win the lotto themselves for only 700$ 😂😂
bro the reason for the argaliumalpha or that aluminium silver rod, is because of the resonant features it has, they say it produces a clean sinewave and i believe it dialectric resonance is what they are after they are not after conductivity
You can use instead of argaliumaipha material, I think they say it so that you don't try to do it or it becomes more difficult because of that, but you can use an aluminum or copper tube or cable, but I would recommend it more because copper is more conductive than copper. aluminum in the high voltage lines, this effect is called the corona effect, it is the magnetic field that generates the current and it is the same thing that this project that concerns you does and as a comment I tell you that the cables do not carry current, the current moves differently, they are pulses forward and backward and what the cable really transports is the magnetic field that makes light bulbs, irons, refrigerators, etc. turn on. Try it, don't give up. greetings saul ramirez
I think that what is needed is the same aluminum used in high voltage transmission wire or the addition of a super conductor like Niobium aluminum and niobium gallium superconductors. But as most people know these type of conductors require very low temp.
I am glad I've found your video. I was going to build one and see. It looks simple enough, but I guess Liberty Engine could be a fake one or something not that easy to be built. I hope you can find something to make it work so we can learn from you too. Good luck.
Hello, I believe I am understanding the process that is taking place here and what has to happen to make it work. I still don't believe that silver has much to do with it. I believe I have some modifications and different configurations that would be beneficial. I'll be doing another video soon to explain. We'll see how it goes. Thank you.
the liberty engine is fake.. That is why everyone else's dont seem to work.. its a scam for views and ads.. IF it really worked they would collab with big youtubers.. but they never do, and always claim they cant sell a working model even if you offered billions of dollars.. I wonder why, its only a 100$ worth of scrap, would be hella profit margin.. but cant sell something that dont work.. get found out quick and shut down..
Please tell me about how Connecting the external wire to the circuit and the circular cylinder inside the coil, how can it work? I made the same thing as you but it doesn't work. Did you use any magnets?
You can't use copper bar because the tow magnet on the side loose the magnetic forces in between and you need to have a 12v stater, to light at candle you need to have matches.
Lo más probable es que los que han presentado está alternativa, sea solamente para despertar interés y que el vídeo sea visto muchas veces, pero la realidad es que puede ser tan falso como otros vídeos, usted ha intentado lograr resultados y no lo ha conseguido, ha dedicado de su tiempo y mayor experiencia que muchos de nosotros, gracias por su esfuerzo y sinceridad.
Hello, That is definitely a possibility. If that's the case, there may be many alternate ways of duplicating or producing the same actions or principles demonstrated by those motor/generator devices.
It may also be that this is an aluminum or maybe a iron sleeve. Then glue 2 opposing strong neodymium magnets together, one after the other, so that the eddy currents can have a better effect on the coils of the motor....
I would be inclined to apply Tesla Coil principles to tune this thing. Perhaps with an adjustable coil around the connecting rod. I am too old now to play with it (78).
Hey Scott, first of all I want to say thanks for airing it out. You said what a lot of us are thinking. So don't apologize, Like many of us you watch, take notes, calculate proven ideas in your head and come up with a plan and get nothing. Well along the way your expecting certain things to do what they should. Annndd... they don't! Having said that and reading a lot of the comments, I too think that conductivity of the rod is a non-factor. Basically the motor is working because the magnets are turning inside or outside the coil, or the coil is turning and the magnets are stationary. So what needs to happen in this case is the generation of a sufficient magnetic field inside the coil. Determining which direction and the intensity of the field, I believe is the key. Shortening the rod would most likely help. Rod length might be determined by the material. Copper, pure aluminum, whatever! I'll end with this. If it actually works, the billions that could be made by keeping the particulars the design close to the vest is a good reason to not put it all out there. Or the fear of your life. But enough minds working in the same direction will eventually lead to a break through! Also in the testing of one version of the engine. They are running power tools, lights and computers on what they show as 228 volts... who does that! Something to think about...
Hello, Preaching to the choir. But further suppressing it is only going to keep it out of the hands of the people and only controlled by the people who want to control everything and charge whatever they want for something that should be free or at least very cheap" It would be a different world. My belief. We'll be talking. Thank you.
I just found your channel. I subscribed and liked. Very interesting design. I will follow along to see what comes of this. All my best. Oh by the way,Mercury would evaporate way below the melting point of Aluminum. The only way I could see using it would be to drill from one to almost the other, in the center then add the mercury and plug the hole . If the bar gets hot then you would need a pressure relief valve and have this " Outside " Important !!!!
@@johnM-Jr Yes. What do think of it ?. Has for me I would like them to set it up better,I like to see Top,bottom,sides ,corners, No wires out of the whole picture, Etc.
i notice that the bracketts holding the transformers are not steel? and to start it i seen that he used a 208/230 turntable motor .to start the unit.is your motor a 3 phase 208/230 volt ?
I've been following this for a while, in another video, the type positions 2 strong ferrite magnets on the microwave transformer, which are directly flush with both openings on the left and right of the motor without an anchor and the whole thing without a rod and it seems to work, maybe you like it would you like to try it...? Don't forget, did you use the microwave plate motor to get the electricity flowing? Best regards Rico
I've got an idea that long pipe change it out to iron. Cover the whole pipe with copper but run it through the pipe I'd make it where I can make two versions where one would spend and one with we're both of them have like plastic not metal get hold of them and place where on each end. I think you'd have better luck on making free energy that way. And it may have to be a big pipe almost touching the walls of the most inside of the motor the stator. I think that was most likely to work but I would wait till last to do it.
The secret is very simple! The video was cut in the right place! He should put his generator on a glass box/aquarium and then demonstrate his experiments!
with this configuration, a shorter copper bar and the connection of the coils on the stator at terminal 1+0 and the other coil 2+0 to alternate, remembering that one magnet is (N) and the other (S). If it doesn't work, leave the stator connected to the electrical network and test the coils separately from the stator to see if the current is equal to that of the stator. If it works, measure the watts of the coils to see if it is greater than that of the stator. Then just look for their secret. Good luck, I'm in the crowd.
silver has a total different reaction to magnets. take a silver coin and watch how a magnet can move it slightly. Copper does not do that. It might be possible to try a silver plated aluminum bar. I'm putting one together now, just looking for the right motor to use.
the reason it doesn't work on this model is that there are no moving parts...there has to be an alternation of the + and - for it to work and produce energy
I think it's the bar and its not silver mix with aluminum, its hardened steel like a shock spindle which is very much a better conductor of magnetic energy
@Scott Fogarty there might be a spark gap in the center of the pipe that can not be seen, as you need to pulse the coil windings with electric field or magnets, spark gaps are RF, that could excite the coils. Also make sure the windings in each end are apposing each other as you might have the coils going in the same direction, try and make one side north and the other south in the coil winding direction.
I going to make one of this. In my opinion. You have to check 1. remove loop of electricity that's come from one generator ( microwave on left and right ) 2. put only one on the left or right 3. Find a distance that's should work by 3.1 Plug motor with home electricity line to make sure that motor is work 3.2 Measurement volt on one generator ( microwave on left or right ) 3.3 If (3.2) work on left and right 3.4 Then join Left and Right on both concurrent 2 line 4. If both of generator was generated electricity then move 3.1 to use electricity that was generated from generator. All i think is my step to make if i was your
you dont need a rod inside. put the magnets on the other side of the transformer and make sure the magnets are inside the motor housing, you will need to charge it with electricity to start it. you may need to add a few more magnets to get more surface area
In the video by him he took a microwave turntable motor, asynchronious, and fixed a lead and plug to the turntable motor terminals, he then spun the motor to show that it put out 230 volts to the plug! When he started the motor generator he plugged the turntable motor into the power board turned it on and then spun the turntable motor, he showed that after the spinning of the turntable motor the light on the power board came on and stayed on!!! He then began plugging the appliances into the power board individually showing that they worked, after which he plugged everything into the power board and run them~~~~ The silver/aluminium bar has some sort of resonance factor associated with it.... It's not just the resistance of the bar.... Hope that helps
If there is a bouncing magnetic field, then copper won't work because highly conductive materials can generate a lot of eddy currents. They said that rod has close to 0 eddy currents property. They melt all the materials and make the rod and then use specific techniques to get the unique properties. (They commented this on one video) Sadly they don't reveal the process. But I think you should focus on eddy currents instead of conductivity. I'm not a physics expert, so I might be wrong, but they definitely said 0 eddy currents is necessary.
Which metal or metal composition of aluminium is not affected by eddy current? Pure aluminum (99.9% or higher purity) is not affected by eddy currents. Eddy currents are induced electrical currents that circulate within conductive materials when exposed to a changing magnetic field. However, when aluminum is alloyed with other elements, its electrical conductivity can be altered, which may result in the generation of eddy currents. Therefore, pure aluminum is the most effective at minimizing the effects of eddy currents.
@@ravensix6666I'm not sure, I asked AI and this is the answer I got. "very pure aluminum would have more eddy currents when exposed to a changing magnetic field, compared to less pure aluminum or aluminum alloys." (Not sure if AI is correct though) In comments some people say that pure materials are important. There was one dude who said that aluminum alloy made by old techniques (i guess not very pure) would work. I know there are some techniques that can eliminate eddy currents like cutting straight lines in intervals or laminating.
Hello, Aluminum is affected by Lenz's Law. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-O9DaKP2PhL4.htmlsi=KVO9WxqhPXcQSdHp They mentioned in the video that "Later we will protect the rotor part with methacrylate" I don't know that that would have any affect on eddy currents. Maybe maybe not.
I think the bar has to be shorter, to get the torque closer to the stator. and the 304 stainless steel bar I think improves the system by not attracting a magnet. The connection of the coils to the engine is different from the Lybert 3.0 and good luck, I think it will work.
Скотт вы умница нельзя остонавливатся я тоже собираю этот генератор и буду проводить эксперементы если что-т0 получится я вам обязательно сообщу . Liberty Engine обещают скоро опубликовать доработки с этим генератором , улучшить запуск и что-то ещё , будем ждать делайте видео с коментариями у вас это хорошо получается.
Далеко продвинулись в сборке? Допускаю, что конденсатором можно передать разряд на катушки и возникнет магнитное поле вырабатывающее электричество и именно переменный ток в 220в, но как остановить работу генератора?
En mi opinion , lo de la barra de aluminio -plata es un despiste para el personal................Yo creo que el secreto esta en crear un campo magnetico tan fuerte en el espacio del rotor , del motor que se presenta , que a traves de los bobinados pueda extraer el voltage que se busca.................Comprobado esta que si se hace rotar con un taladro el rotor de un motor de estos , sea monofasico o trifasico , por sus caja de bornas , extraemos el voltage que este necesita para su funcionamiento......por lo tanto aplicando una fuente de magnetizacion fija a la barra , de tal eficacia que el rotor que habia , podriamos extraer el voltage que se busca..........YA DIGO QUE ES MI TEORIA
scott, coodos to you. i ve seen one place on line that sold silver aluminum alloy in sheets and stock.99% al and 1% si. he told me once on a live that he used silver aluminum on the first one. it was under the black elec tape wrapped around rotary. if successful, go open source. best proof is the succesful inventor end up unalive.
I cannot say that this device will work but I do remember individual that they left the center and cut off the two sides that is one of the videos that I've seen
Mr Scott, I'll tell you what I am doing to get something working. And it's not borderline illegal or dangerous. Before I go to sleep tonight I will have ordered a windmill permanent magnet motor from aliexpress. $500ish. 120volts 10kw and legal to buy and operate. Operates at 500rpms.
Hello dear friend, could you provide us with the technical data so that we could also produce our own electrical energy or does this invention of yours not work?
Try alluminium and silver alloy which is sent a magnetic field while its in molten state , like a sort of material programming, then use that rod inside , it should create the magnetic fluctuating field to make your desired output or some
So, magnetic Silver/Aluminum. Some say use non-magnetic others say magnetic. Can the process be done with any material after the material is already formed? Some have said to "charge" the bar with 12 volts DC to help align the bar. Hard to tell what is truth. Thank you
Ртуть должна находиться внутри цилиндра. Под воздействием переменного тока в магнитном поле ртуть вращается, ртуть - это металл, проводник. Получается вращение проводника с переменным током в магнитном поле. ;)
Всё верно. Именно так в древности летали виманы, и пирамиды вырабатывали энергию. Не хватает лишь одной детали... Нужен великан, который будет крутить ручку динамо-машины. Великан должен быть бессмертным, дабы двигатель стал по-настоящему ВЕЧНЫМ!
А "частицы"в сплаве не могут вращаться? Сие в голову не приходило? А если частицы, да в кучу, да из этой кучи спрямить их выброс? Гиперболоид? Вот и двигло для Космоса! И скоростенку это двигло может развить немеряное! Это не консервная банка с килькой, на энергетике которой взлетели, а кильку доели. И болтается банка вокруг планеты, пока не сгорит или не утопнет в окиян-море, если кому на голову не сбацается, как нам отработаные ступени-банки без топлива пока что падают.
Bonjour,de la FRANCE, je te dis merci pour ton travail,j'ai fait et perdu du temps,pour faire ceci,mais aucun résultat,il y a une vidéo sur le net,qui dis qu'il faut envoyer un courant dans le bobinage moteur avec un moteur de micro onde ,quand pense tu ?
Hello, It's a synchronous motor that turns the glass turntable in a microwave. I have it plugged into the power strip in the video. when it is turned, it generates 120 volts that go into the power strip, and then into the motor terminal (theoretically). In my device, it shows in the power strip but is not registering in the motor terminal. Still working. Thank you
Brother great job. I would try a pure alluminum bar to try to get as close as possible to the video. I am currently looking for a foundry that will make the alloy from what i think might be the ratios. I am also going to get a pure alluminum rod made as well. Should be a good winter project.
copper has a slowing on a magnet current and frequency thats why they used it use a magnet ball and drop it through a copper tube the slowing do to magnet field being generated !!!
Many thinks are not same as Libert project. You use 1 phase engin there 3 phase engin . Conection have to be delta. Socket 220v and microwave coils in pararellel conection witch engin coils Don"t forget about excitation current
Hello ! I will also try to built one of these devices. I think the the ingridienz called aluminium is most out (of its magnetic proportiesis) essential. In my opinion acts the Aluminium as a magnetic flux conduktor and reverses the Manetic field of the iron parts.. I hope you will get it to run.. kindly regards Wolf
Thanks for actually posting this. We need his sort of thing-at least until we get real specs from Liberty. That being said, I have a couple observations about your build. First of all, it’s very clean and well put together. Kudos for that. Second, I notice that you’re trying to run it at 110v instead of 220. Because I believe this is basically an AC resonant tank circuit, it may not behave the same way because of that voltage difference. I’m pretty sure the capacitor is necessary in order to get it to resonate. Whoever told you to put 12 volts to it obviously doesn’t understand the purpose of the device. If it does end up acting the same at 110 as their 220 device, you would have to energize it with a 110v platter motor to induce the resonance. Third, I believe that if the shaft will, in fact, work being copper, it’s length and diameter would need to adhere to a precise calculation. It looks too long to me, but then again, it’s running a different voltage, so who knows? Keep up the good work, and keep us up on your progress.
Hello, This is an older video. I have since cut the bar down to six inches among some other modifications. I'm in the US. Most all of our appliances run on 120 volts, The comment that was made about 12 volts said to hook the bar up to 12 volts like with something like a battery charger. That it would do something to align the bar's properties prior to assembly and that the actual bar had an electrical current passed through it in its molten state during fabrication. Probably more disinformation. Hard to say. I'm using a single phase motor. I want to use a three phase motor but there aren't any at three phase/120 volts. I'm thinking of going three phase and doubling up the 120 volt coils in series or making my own 220 volt coils, then stepping down a different set to 120 volts for the loads. I don't know how you can get something to resonate unless it is resonant to all of the other elements of the device (in frequency). I have a three phase, 230 volts/60Hz asynchronous Cantoni motor that I might use. Stay in touch. Thank you!
@@ScottFogarty-iv9wt I'm with you there as to being in the 110V hemisphere. To get 230V transformers you just have to buy them off of the European or South American market (or replacement parts intended for those areas). I havent been able to get those yet, cuz theyre expensive. A stepdown transformer to 110 is easy after you get it working. I also have to agree with one of the other replies, that eddy currents are detrimental to the operation of this device. Also, this video, I believe, give the properties for the bar. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5xYtRSUXIJ8.htmlsi=bKFSAz7_T2ED5Wnc
Hello again, You could connect two 110/120 volt coils in series to get the 220/240 volts or wind your own to get whatever voltage you want (I know you know that). You may have seen this video. If not, it's very good. Good Luck. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gXkqVnGoIAE.htmlsi=0KbFw_x5yDLoprCg@@ccreddell
Hello, Niether. I believe that there is another process at work here that can be accomplished by other means. I will be doing a video soon to explain. Thank you.
Silver is paramanetic.... Fist stern gerlach experiments for QM were silver atoms because it has 1 extra electron which lets it be weakly magnetic. Aluminum is diamagnetic though.... But theres no cutrent in the bar its not about conductivity....
dear sir, i notice the electro magnets seem to be cut wrong cut the end off thru the weld . The opposite of what you have done. A minur detail but could nake a difference .yours rob xx
you have to prime the motor with a jolt of power...once it starts you disconnect the power...like you do with a capacitor...once primed...you will not have to do it again...just like your microwave...and the reason in the other guy's video he used the microwaves carrousel motor to reverse power/prime the power cord...you have to create the initial current to activate the transformers and magnets to create the perpetual energy...just a little food for thought...smiles
It is all about resonance. Please consider magnetic resonance. Please change the alloy to 30% aluminum and 70% silver or if possible bring it all silver 100%. In other dimensions the silver and gold are gateways to infinite energy. You should think of energy as it is coming from another dimension and you are tapping to the either (god energy).
after building few of these, im def becoming skeptical, the coils does make 110v at 1500+ rpm but not promising results of amplifying the voltage, big or small magnets, even adjusting gaps, .. theres a better concept im working on thats never been done..
Hello, Interesting. So many different ways to do it. I'm interested in a "no moving parts" generator and it powers itself. Good Luck with your build. Thanks!
Copper has potential perhaps. See also small dimension construction of composite as did Dr. Deborah Chung , negative resistance Chung Experimentation Results. Alloys are probably in the crystal patterning dimension reach of things of some note like also the Casimir Effect observations. So your copper could be part of a new alloy to develop. I'm glad somebody else besides me tried to follow the video wiring hook up on that resonance. The ends having repulsive permanent magnetic alignment has my attention. I also imagine intuitive copper but expect copper alloy to introduce micro structures with experimentation to play with the don't know until you try principle. Honestly somebody like Tesla seems to know on the way there. Intuitive hypothesis can get it. I appreciate your interest. I've been trying to catch up in my studies as well.
Hello, You can watch their latest video about the bar. Their bar is about 7.50" x 1.125". I'm experimenting with mine. I'm going to shorten mine, depending upon the width of the winding case of the motor, about .50" past each side of the case. Thanks! Good luck!
@@user-zf1eg8iy2n Вообще нужно эти две катушки на сердечнике трансформатора поместить внутрь статора и закрепить, что бы не вращалось (а то эдс заставит крутиться, как ротор), и тогда будет счастье, будет генератор работать. А если ещё поставить частотник с алиэкспресс, который без потери мощности, для регулировки оборотов на статоре, то мы получим генератор с регулируемой мощностью на выходе!
......и выяснил одну очень важную информацию : "самозапит невозможен". Всё дело в том , что во всех подобных устройствах действительно выделяется напряжение ИЗ ЭФИРА , НО скорее всего "другой структуры" (по другому не могу выразится ). Поэтому , когда мы замыкаем цепь на самозапит , это напряжение гасится , и в итоге мы не видим результата. Возможно построить схему с большей мощностью на выходе , чем на входе. Но это не самозапит. .....
the sides of the transformer must be closer to the motor. it will also work without a bar inside but they must be too close almost attached to the engine.
Hello again, So the bar could actually be made of anything just to hold the transformers in place closer to the windings. Seems that it should still be conductive to control and more efficiently distribute the magnetic field to the windings rather than not having a bar. Seems like the content might not be as Important depending upon the proximity of the transformers to the windings. Interesting. Something to think about. Thank you!
From the video it appeared the motor windings were in series. Might want to verify. and the center winding I believe is creating the oscillation from induction.
