No video :(

My E92 M3 EXPLODED! S65 Total Engine Failure

Подписаться 91 тыс.

Просмотров 115 тыс.

50% 1

Nightmare coming true....Are S65s really this unreliable or is this just bad luck? Maybe this is why BMW ditched the V8. It was running and driving so well until all of a sudden......
My BMW and other merch: www.boostedape...
Instagram - / matt13ross
Early access to videos and other perks below:
Channel Perks: / @matt13ross
Patreon - / boostedapex
Teslong Borescope: amzn.to/43SHJu2
E92 BMW M3 Upgrades:
SS Valved Turner Exhaust: rb.gy/smxemi
Brake Lines: rb.gy/13b9lr
Front Rotors: rb.gy/bd0cc3
Rear Rotors: rb.gy/00i9bu
Akebono Pads: rb.gy/842a1p
Wheel Studs: rb.gy/8iec91
Caliper Paint: amzn.to/3IUCznN
Thanks to ECS Tuning for helping out with parts!
Common tools I use: (contains affiliate links which I may be compensated)
Quick Jacks: amzn.to/36gkqBc ebay.us/2rUBfi
Milwaukee 3/8" High Speed Ratchet: amzn.to/3zo9NqC ebay.us/KR0raE
Milwaukee 3/8" Impact: amzn.to/3GaiYyT ebay.us/DhzBdX
Retractable Wall Pressure Washer: amzn.to/473zfl9
Pro Model Wall Pressure Washer: amzn.to/44TZIjc ebay.us/5kMpux
Red Spray Bottle: amzn.to/3DbqszB ebay.us/5xbQoa
Air Hose Reel: amzn.to/44A3kHm ebay.us/bMhFu0
Extension Cord Reel: amzn.to/3o4SyZ3
Jack stand wall mounts: amzn.to/3tWDOi7
Triple square sockets: amzn.to/47zBdsZ
Garage Upgrades:
Noco Genius Battery Tender: amzn.to/3zOCoFY ebay.us/lZJCxy
Battery Tender Wiring Harness: amzn.to/3UncTVL ebay.us/276IRz
Extension Cord Reel: amzn.to/3o4SyZ3
Air Hose Reel: amzn.to/448ZNQp ebay.us/bMhFu0
LED Ceiling Lights (set of 6): amzn.to/36m00GP
LED Cabinet Lights (set of 3): amzn.to/3irLWhg
Wall Cabinets: amzn.to/2TwigqJ
Wall Mount Power Tool Rack: amzn.to/3dNLHvc
Camera Gear:
DJI Osmo Pocket 3: amzn.to/4aUakSR
DJI Mini 3 Pro: amzn.to/3Qz39Yq
Canon 250D SL3: amzn.to/2L477Jm ebay.us/vdqXH0
Sigma 18-35MM lens: amzn.to/3cSM1uY ebay.us/pjLbAT
DJI Ronin Gimbal: amzn.to/3zwyJff ebay.us/ppnxfj

Опубликовано:

15 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 946

@matt13ross 4 месяца назад

Big thanks to Teslong for helping me inspect this engine with the articulating borescope! amzn.to/43SHJu2

@vitornunes8044 4 месяца назад

Sell it right now...👍

@Perceni 4 месяца назад

The same thing happened to Speed Academy! they did a rod bearing replacement and the car had catastrophic failure miles later. Probably has to do with tolerances of new bearings.

@bustjanzupan1074 3 месяца назад

Thank you too. But, didn't this engine got some "reward" of "engine of the year" ??? Than what's This ??? I Know, that Any V-engines Are Bad 4 maintenance costs + Worse fuel consumption , ... so, i Avoid them as Much as Possible ... Thanks 4 the video.

@wwgbert 4 месяца назад

Well time to become a lot more familiar with the M539 Restorations channel, he did an S65 rebuild about 4 months ago. I'm sure he will be happy to help point to the right sponsor and people who know what is needed. You've got this just like all your other big projects.

@mr.spokomaro 4 месяца назад

100% Sreten is the man to call.

@HazeyDread 4 месяца назад

His videos are awesome

@janficenec9853 4 месяца назад

exactly what i said few videos back. :D

@YungCwalk 4 месяца назад

Literally step by step bro is a goat. I would have that series playing in the background while WFH

@carsaretrulyart 4 месяца назад

Could not agree more, Sreten, the guy that runs the channel knows BMW's like his own pocket. Absolutely love his videos

@lukeharrielson9357 4 месяца назад

Dang! That Cylinder looked like the inside of a blender 😂

@matt13ross 4 месяца назад

Hahahaha yes

@lukeharrielson9357 4 месяца назад

I mean it’s not funny but kinda is😂

@algahiemamir 3 месяца назад

bro dropped the hardest intro to cylinder #3 😭

@acroracing 3 месяца назад

😂😂😂😂

@jlepine 4 месяца назад

You should reach out to “I Do Cars” as he has several and would probably be happy to tear yours down for one of his videos to figure out what happened. Win/win!

@ChileVuela 4 месяца назад

Definitely do this!

@richardgraham1167 4 месяца назад

This was my first thought, also. Great minds think alike!

@kiwihame 4 месяца назад

@matt13ross 4 месяца назад

Where is he located?

@ts6141 4 месяца назад

@@matt13ross Missouri

@EstorilE36M345 4 месяца назад

This is your opportunity for RU-vid growth! People love schadenfreude! Take it out and pull it apart and go completely Sreten on it!

@VINCENT-2002 4 месяца назад

Sreten @M539Restorations knows a lot about this engine. Maybe he can give you a heads up.

@-NxFace- 4 месяца назад

Ah yes, the BMW goat himself Sreten

@Vikturus22 4 месяца назад

His e60 m5 has 260,000km on it and runs mint! (Might be due to him doing a bottom end rebuild)

@matt13ross 4 месяца назад

Positive spin on it!

@Foursterrr 4 месяца назад

After looking in the cylinder, I had to pick my jaw back up from the ground.

@matt13ross 4 месяца назад

Same!

@josephhernandez5986 3 месяца назад

Me too 🤣

@foxxygearreviews7754 3 месяца назад

I absolutely loved my e90 M3 - maybe the best driving car I’ve ever had. But man - this video made me glad I sold it. I lived in dread of a rod-bearing issue that would trigger a repair I couldn’t afford.

@Dewree69 4 месяца назад

Seems like this was a problem in timing. This engine has hydraulic timing tensioners, and if one gets stuck due to varnish / not being serviced regularly, they let off the tension and your valves can skip timing. That weird sound you were hearing before could be chain slapping the tensioner or rattling about. If you're thinking about rebuilding this engine, probably the best place to learn is M539 Restorations channel. He hand built this baby on camera with all the torque specs and proper factory procedures, a real goldmine of information. I really hope this won't mean you're selling the car, because this is a great car for the channel!

@k0j_ 4 месяца назад

Damn man thanks for this info

@fernandoilroso 3 месяца назад

Agree. Also the nikasil doesnt look good con some cylinder walls.

@jasonlouis5498 4 месяца назад

After watching M539 and what he went thru with trying to rebuild these engines (the V8 and V10s) this is probably gonna involve a new one. That block is toast. That sucks bro.

@danielsvendsen3761 3 месяца назад

You can fit cast iron sleeves to these blocks

@qx4n9e1xp 4 месяца назад

LS-Swap: Financial sense. S65 rebuild: AUDIENCE SENSE! Good luck, Matt! 👍😁👍

@greebuh 4 месяца назад

Another s65 will just blow up again.

@CharlesExtrom 4 месяца назад

S85 swap 😈

@greebuh 4 месяца назад

@@CharlesExtrom One lump of crap for another🤣

@oldfashionedwrx3574 2 месяца назад

@@greebuh there is a reason, bearing design, clearance etc

@greebuh 2 месяца назад

@@oldfashionedwrx3574 Doesn't change the fact that they are crap and go out after 30k miles. I wouldn't expect Subie to think engines can go past 30k before they need a rebuild, though. Engine bearings should last hundreds of thousands of miles. My 500hp Lexus has over 150k miles on it and will smoke the shit out of either of those trash Bimmers and needed a rebuild.

@kwozzie 3 месяца назад

I had the Rod bearings done on my E90 M3 after a ton of research. I fortunately was steered in the direction of experts who advised that rod bearing replacement isn't a straight forward job if you do it correctly, as in, measure for wear and tear as sometimes you may need to use different size bearings. Also, it has been determined that the main bearings wear out at a similar rate so they should be replaced as well when doing the rod bearings. After having both done, I am so pleased for the peace of mind very time I drive the car. It's my daily and I love it. If you go for a quality rebuild, you'll have the same peace of mind and will experience this awesome car for yourself.

@clem_M3 3 месяца назад

C'est mon daily aussi mais j'ai les actionneurs de papillon en panne électronique. Je pense qu'en ville il s'abîme plus vite que prévu .

@alfyer5 4 месяца назад

I learned this before with my e46 m3. A cheap m3 is an expensive m3 and this proves it 😂

@matt13ross 4 месяца назад

Very true! But good video content.

@Chattsteezy 4 месяца назад

There is nothing more expensive then a cheap BMW lol.

@matt13ross 4 месяца назад

Sure there is, a cheap Porsche lol

@bjwhitegti 4 месяца назад

Cheap Ferraris are even more expensive! :)

@mrtordse9042 4 месяца назад

Same with my cheap e46 m3 melted a piston right after purchase but i will still get profit if i sell because it was so cheap

@MarceloPaciorek 3 месяца назад

Im a GenX who owned 11 BMWs in my life. Whenever I heard an engine noise, I stopped the car and towed it to the dealer. It was an expensive hobby. 😅

@hunterpinnell6254 4 месяца назад

Why Matt only has 70K subs is beyond me and its very irritating. Dude is one of the very best on RU-vid and deserves a much better following

@j.a.therollingman9216 4 месяца назад

Best car channel on YT

@ohb7517 4 месяца назад

Same with a dude called Chris Sullivan

@hunterpinnell6254 4 месяца назад

@@ohb7517 TOTALLY AGREE

@JKNL2024 4 месяца назад

Agreed!!! Greetings from the Netherlands

@LouisEguchiWale 4 месяца назад

Agreed he’ll get there if he keeps going

@smashmclovin 4 месяца назад

That wine voucher used to come with every ECS tuning order 😂

@matt13ross 4 месяца назад

Yup lol

@BPF80MCar-vi1pg 4 месяца назад

Still does

@ukaszciura4106 4 месяца назад

Probably crankshaft was too worn and would not accept new bearings. This is common when changing bearings through the oil pan without measuring the crankshaft. Look "BMW M3E92 - Wybuchł Silnik Dlaczego ???- Grupa Rajdowy Felix", he's got same isue in e92 after rod bearings change. The piston looks also the same.

@danielcgomez 4 месяца назад

or even those wack jobs from Canada ...Speed Academy ...engine shat out a rod right after a sump method rod bearing replacement.

@FailofWar127 4 месяца назад

@@danielcgomez For speed academy, I think their main bearings failed

@danielcgomez 4 месяца назад

@@FailofWar127 nope ...it was the no.1 rod bearing that spun.

@Assimilator1 4 месяца назад

@@danielcgomez Nope, FailofWar127 was right, No1 mains bearing failed (see their video at 16.36) which in turn took out the rod bearings.

@danielcgomez 4 месяца назад

@@Assimilator1 Thanks, I stand corrected ...I wonder if the Bearing failed due to the usual timing chain loading?

@Mohammad_E89 4 месяца назад

Its 3rd s65 that goes BOOM BOOM on YT in recent months,first one was SpeedAcademy. the fun fact was peter said "OH what a motor!" and a second after that engine gave up,2nd one was M539 restoration, and 3rd one is yours.

@froz3nmindz124 4 месяца назад

There is also a big German RU-vidr called JP Performance, his E92 M3 also blew up on him 😂😂😂

@jgripen969 4 месяца назад

Didn’t M539 buy it already broken?

@froz3nmindz124 4 месяца назад

Make it 5 now ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WuXVC3nwGg8.htmlsi=P6Jznfe4-D0tNZot

@robertikus7484 4 месяца назад

Yes M539 bought his m3 with a broken crankshaft

@maggieba3235 4 месяца назад

Maybe it's intentional....

@Perceni 4 месяца назад

The same thing happened to Speed Academy! they did a rod bearing replacement and the car had catastrophic failure miles later. Probably has to do with tolerances of new bearings.

@dimitripetropoulos9332 3 месяца назад

No it was a main bearing failure it’s becoming a common failure point but owners would rather keep their head in the sand

@imtheboctilian 3 месяца назад

I'm so sorry this happened to you. These are such fun cars to own and drive, but all that joy is easily taken away when reliability gets in the way. I hope you're able to figure it out. Let's hope it's a blessing in disguise and helps your channel grow! (First time I'm seeing your channel was being reccomended this video).

@matt13ross 3 месяца назад

Hopefully it helps me grow!

@averyc7492 4 месяца назад

That’s an extremely strange failure. Haven’t seen anything like that and I’m a pretty dedicated lurker on the forums

@sethlyte 4 месяца назад

This is the main reason I am staying away from gettin a e92 M3 but man they do sound beautiful and look amazing

@user-eu9ub8kj9j 4 месяца назад

Speed academy also did their rod bearings and the motor popped like a week later, i guess if you diy it make sure you get the right bearing and make sure the torque specs are accurate

@kleemanjad 4 месяца назад

Didn't the car they work on had a main bearing failure?

@gordonm3 4 месяца назад

That car had problems already from the jump, probably a main bearing failure and previous owner abuse.

@Eliasccv14 3 месяца назад

I honestly did not expect the cylinder to look like that! That’s pretty gnarly oh my gosh.

@1kontrabida 4 месяца назад

RU-vidrs made the S65 and S85 engine trending on rod bearings issue, You should check the forums on the S62 engine and the dreaded carbon build up it was like a virus that at the end of reading the threads u would feel u might have a carbon build up issue…This type of engine issue became a plague up to this day, which begs the question that ive been meaning to find out as to how many engine failure these engines have that was caused by rod bearings? and not user error because ive only seen deep scouring on a handful but no bent rods or engine failure. Ive owned and still own M cars and have them all boosted with all stock internals. Per my experience for this specific engine i had the VF and The ESS supercharger on my e92 and can't complain and didn't mess with the rod bearings or whatsoever. I think the key on the cars is first read manual i know its boring but BMW didnt just produce the manual just to look proper and cute at the same time. Proper warmup is key i mean it should be on top of ur list. At the end day i'd say get an oil analysis from blackstone first should be in order, next would be compression and the usual suspects on checking the health of the engine before doing the surgery on something not needed to begin with. I hate to say this and sympathize as well but my verdict is user error. Btw before i forget make sure ur tools are up to spec specially torque wrench and example would be just simply dropping this tools can mess their calibration. And as car enthusiast to another… my advice is to "Treat every build as if it is ur last and always be positive it will help u greatly not just in building ur dreams cars but in life in general" Hope to see the rebuild, learn from it and make it better" Good luck

@fhash_4827 3 месяца назад

This is such retarded levels of copium to defend a shit design from BMW. It's a shit design, just like b6/b7 Audi S4 plastic timing chain tensioners and early c63 head bolt. A shit design is a shit design. Idk why people defend these piece of shit s65 and s85 engines. BMW is all about the inline six cylinder anyways.

@philipbanks2462 4 месяца назад

Videos like this make me appreciate my ol faithful E92 328i even more

@memeseller1706 3 месяца назад

Shut uo

@F32Aidan 3 месяца назад

@@memeseller1706Ooo someone’s rod bearings blew

@charlesianima 2 месяца назад

I loved that S65. First ever and last ever V8 M3. Last ever NA M3. Such a beautiful car, and I thought nothing was going to be better than the e46 M3 for me. Made me so sad to see that vitamix in that beautiful engine. Best of luck to you!

@louislavoie1238 3 месяца назад

Someone needs to make a Coyote swap kit for these. Already is a LS swap kit for E92 but the Coyote is closer to S65 high revving nature.

@matt13ross 3 месяца назад

High revving LS??

@ichigonubetube 3 месяца назад

I've never seen failure like that just come out of nowhere, not without boost. 😂 It could be anything. Rough luck buddy. Coyote swap it, because everyone does ls swap, then just toss the plastics back on top, nobody will ever know. 😂😳

@KERO_FL 4 месяца назад

Same thing happened to me on my s65 with 50k miles on it only 4 months ago. Same exact cylnder. If you don’t torque the rod bearing bolts the right way they come loose and this happens. New engine $15k+ for a healthy one..

@user-eu9ub8kj9j 4 месяца назад

Speed academy also had their s65 e90 pop after not long, people who diy it often screw things up and wonder why their motor pops not long after

@matt13ross 4 месяца назад

I torqued them to spec with new rod bolts

@franksam8610 3 месяца назад

That sucks but it happens no matter the brand. I have a e46 m3 for 12 years no issues I do all work and keep up on maintenance. I will doing a full coolant system refresh here this summer

@avusm395 2 месяца назад

I owned an '11 M3 with an S65 than seized up on an off ramp. It had 38k miles and was classic rod bearing failure. Covered under CPO but I didn't keep it long after they put a replacement engine in. Hopefully the aftermarket has developed a full proof solution to this issue.

@matt13ross 2 месяца назад

No full proof stuff. Just replacements every 80k miles or so. Sad

@kingcars 4 месяца назад

Welp....can't say I expected to see that sorta carnage. Wow. Very curious to know what caused it.

@denisfitzgerald3474 4 месяца назад

Rod bearing spun most likely. Be good to see the bottom end too. Great channel Matt, love the Porsche build too👍👍

@pjmccracken 4 месяца назад

Sorry for the loss, but your misery is our content. 🤣That block is toast, get a replacement block or engine and do a full performance build as much as your budget will allow. Look at this way you will end up with a reliable car and not driving around wondering if that day is gonna be the day it goes boom so in the long run you will enjoy the car more, secondly your subs get some very interesting content along the way. Everyone's a winner!! Wish you the best of luck with it and I will be staying tuned.

@ftffighter 3 месяца назад

My guess is that timing readjusted coming back home so you didn't hear it until you drove it again. Sounds like it broke timing tbh, but hopefully you'll make a video and we'll see!! Something small definitely worked it's way into something bigger really fast though, sorry to hear this man!

@DKlimas 4 месяца назад

absolutely in love with the m3 e92 restoration series, its the thing that brought me to your channel, watching these videos is oddly relaxing and satisfying in some way. Id love to see this e92 running, best of luck

@famus801 4 месяца назад

M539 Restorations Can Absolutely Help Guide you if you go the rebuild route

@E9X_Manny 4 месяца назад

Could be a lot of different variants. I’d guess perhaps fuel injector stuck open on cyl 7 (if I’m not mistaken )and washed down all the oil. Or crankshaft was too worn.

@DaleSteel 4 месяца назад

That ticking at the front is water pump mine sounds same.

@BmwMe-uh9sy 4 месяца назад

You had warnning sounds n ignored em

@matt13ross 4 месяца назад

Yes

@EtowahValleyRovers 4 месяца назад

You could hear the engine rattling on start up at the 56 second mark. Weird because the inside of the engine looked super clean in your previous video

@johnlu8495 4 месяца назад

Pretty sure this is totally normal for S65 starting up. If it's not, then... ah fk... cos mine does that if I haven't started it up for a day or two.

@Nitro-fu7rv 3 месяца назад

Probably a tensioner pumping up

@goxy287 3 месяца назад

Holyy I didnt expect that much carnage in one cylinder

@jimvers30030 4 месяца назад

My advice would be with every car that hasn’t ran in a long time and you are not familiar with the history of it, do a compression test! With most engine blocks it is not that much work to reach the spark plugs. I won’t say that this would have prevented the engine malfunction but if it would make that much compression, and you would enter the cilinder with the camera, you would already see some damage and possibly prevent further damage! However nice car! Hope to buy one myself to restore it

@MrSchn3ll 4 месяца назад

Stick to Porsche, I left BMW a long time ago.

@craigmorgan4676 4 месяца назад

Wots wrong with b..bring..m..mechanic..w..with?They reliable if u dnt go spinning, like in South Africa, if u do rip beemer!🤷🤷😬🙈🙈🙈👎👁👁💀💀💀💀

@bigrinks 4 месяца назад

You mean volkswagen.

@lcssay 4 месяца назад

A BMW dealership mechanic told me that they're great cars, but when the factory warranty runs out, so should you.

@cpy 4 месяца назад

meh, I've had one since 2008. Insanely reliable car, no joke.

@darklegion7780 4 месяца назад

The problem with those cars you know what is it? BAD OWNERS

@S1ckbg 4 месяца назад

This car was obviously neglected for a long time and this engines are notoriously unreliable. Buying super cheap e92 is almost always 100% disaster. Give up before you get trapped in the money pit. Even with tons of money you will never be satisfied and there will always be something new to fix. PS: This is alu block with alu seal in the cyl. The block and crank are toast. Its sad all other cylinders are mint. Probably an injector went offline or something overheated

@logistix5thdimension403 3 месяца назад

If I saw this video before hunting for a good spec E93 I probably wouldnt have gone on the adventure. Fortunately I saw too many awesome S65 YT vids and did it. A lot of PM money but finally got it in near show room condition. Sorry for your loss- Mine had the bearings done a year/8,000miles ago and still has a full warranty until 100K. Its not on the market but if someone throws 65G in my face *maybe ill take it. Really curious what you find out as for the cause- If I had to guess Vanos related or the bearings didnt take.

@taji8928 4 месяца назад

well that piston pistoff

@Piotrowsquad 4 месяца назад

Upper rod bearing failure, caused the piston to fall too far in the cylinder bore, rings then hit the sleeve stopping the piston, rod then went through the piston causing the damage you’ve got.

@orionsires 3 месяца назад

This was painful to see! Hope to hear what the cause was, new to the channel but happily own a problem free e92 m3 stock let it warm up before every drive and it has 102k on the clock. Never had any issues fingers crossed. I would never do rods myself mostly because I would fuck it up. Much respect.

@fadellss 4 месяца назад

Vanos system And the timing You should do it before you go for a drive or test it before Even with the new engine change the vanos and the timing it is always a good idea to for these motors

@gt1r 3 месяца назад

No, S65 has dual vanos which rarely ever fails. S65 also uses hydraulic lifters, so no need for valve adjustment…and zero reason to ever reset timing unless you replace plastic OEM vanos covers with metal washers.

@zilina1130 4 месяца назад

Sorry Matt. That truly sucks. Maybe consider an LS swap. I'm only half-joking. Cheaper, much more reliable, lighter, can build tremendous power . . . and did I mention cheaper?

@user-eu9ub8kj9j 4 месяца назад

And half the redline

@zaviermayo272 4 месяца назад

boring

@DSRDRENTERPRISES 4 месяца назад

you’re 14 huh

@matt13ross 4 месяца назад

You can rev LS to 7000 without much issue. More power cheaper and more reliable. So......

@jackcarine1209 4 месяца назад

@@matt13ross do it

@Jagman2919 4 месяца назад

Hang in there Matt. It’s upward from here. At least you know what happened. Things will work out.

@glennarnold3970 4 месяца назад

Matt the best m3 is an m3 without the s65 LS swap it or in my case ford fg turbo barra as much as i like the e90 e92 i would never go build or by a bimmer engine when my other 335i needs an engine LS or barra all day long but i feel your pain that's why mine is barra powered finding a good s65 is still a crap shoot you get one BUT then your obliged to do the bearings in it even if they have already been changed you are on a slippery slope my friend but keep ya chin up you may find a diamond in the rough cheers from down under

@seeingthelight3608 4 месяца назад

Hope you find a quick and economical solution. A subscriber from the other side of the world. Good luck and chin up.

@matt13ross 4 месяца назад

Thank you very much!

@mchstud 4 месяца назад

I think it’s understood, now, why you’ve seen more views on these vids! This was probably expected by a lot of viewers. You got this, though!

@greebuh 4 месяца назад

The stories about these engines are as true as it gets. Never buy one without setting aside big money. Rod bearings at 20k miles is common.

@createanddestroy 4 месяца назад

You have some slight form of bore score in 2 silinders. I would personally rebuild, if the crank (it probably will if the bottom half of the rod is still on there) is ok it is salvagable. Sure it takes time and money but you'll learn a lot from it.

@jmccarsnmore1025 4 месяца назад

If you can rebuild this engine, perfect opportunity for a 4.4 stroker kit!!

@yalkhazali71 4 месяца назад

Gonna be very tough - that Cylinder needs sleeving at the least and you gotta pray the damage doesn't extend all the way to the bottom so the sleeve has a lip to sit on.

@jmccarsnmore1025 4 месяца назад

@@yalkhazali71 I honestly don’t think that engine can be saved. That block will do a great job as a center table on a living room!!

@Kipbmw 4 месяца назад

Should have filmed your wife's reaction to the news lol

@matt13ross 4 месяца назад

Hahaha

@elliottree2472 4 месяца назад

A very similar thing happened to a motorcycle I owned. I got my bike back from the garage and I noticed it didnt feel right. When I pulled up I had a quick listened to the engine. I noticed there was a metallic tapping coming from the engine (At that point I was not aware of what engine knock was). However, once I revved it up a little it went away. So, there I was, driving at 70 mph on the highway, all vulnerable and that, when the bike went from 70 to 0 in under a second. Before I knew it the fuel tank was smashed straight in between my legs and the bike had completely died. The bike refused to start and every time I turned the engine over there was a lovely metallic jangle from it. I had it towed to a garage (at quite a significant expense I might add) where I was told the piston had given the valve a little kiss. Engine fucked. The end.

@WillardQua Месяц назад

the oil level shown before the explosion actually is very low, experienced it at only a quarter below the max the oil needed to max is 5 quarts, I assume the car is only having 3 quarts of oil

@BG-ri8ww 4 месяца назад

Oooh, that hurts. I admit to chuckling a little, couldn’t help it, that was chewed up real good. Thinking is it worth the big Resto, body paint etc… You won’t get your money back but you could have a great driver for life. This is the perfect moment for that coin flip decision, cut losses now or throw money by the wheelbarrow at it….😊

@JC.LC. 4 месяца назад

Damn man. That really sucks! You should take advantage of that misfortune and turn it into something good. Put in the BMW V10 engine from the M5.

@e39lover73 4 месяца назад

Something good??? 😂😂😂 He'd need 2 more rod bearings. The more pistons the worse it is to fix

@JC.LC. 4 месяца назад

@e39lover73 ok, so in your opinion no pistons are better. Then nothing will break. Great idea.

@e39lover73 4 месяца назад

@@JC.LC. yeah that's true 🤣 but no, I mean the high reving V8 is already good, and assuming the ending is still ik decent shape all it should need is a new piston, crank, and either a head or sleeves. Depends how bad it was. Would be worth spending time 2-3k fixing that than a whole 8k for and drivetrain swap with a custom driveshaft and all that

@JC.LC. 4 месяца назад

@e39lover73 maybe. But he has a youtube channel, and he would get more views and people interested and not mentioning better performance by changing the engine for the V10.

@e39lover73 4 месяца назад

@@JC.LC. the views part is true for sure, the performance wouldn't be all that crazy if a difference, the V10s weighed a significant amount more. But I won't lie it would be a cool custom one off swap

@nvcnc 3 месяца назад

what a bizarre failure. Seemingly happened at low revs but was instantly catastrophic, as if whatever let go managed to end up in the worst possible spot at the worst time. Bearing failures tend to be more gradual, and don't come apart at low revs typically. This did neither. If I had to guess, the fact this happened after they were replaced makes me think a rod cap failed due to improper installation. This may explain the gradual tick, maybe coming and going depending on the temp of the rod end, as well as the sudden failure as it let go.

@gt1r 3 месяца назад

It could be anything. Improper rod bearing install, main bearing failure…perhaps the engine was knocking in your earlier clips (it obviously was) and you continued to drive it with this knock until complete failure.

@atrain132 4 месяца назад

Just started watching, and damn man sorry. Could it be Timing chain guides?

@Oliver-el8wp 4 месяца назад

Chu papi

@user-eu9ub8kj9j 4 месяца назад

Timing chain guides have never failed on an s65 engine in history

@atrain132 4 месяца назад

@@user-eu9ub8kj9j a very quick search on any bmw forum, or search engine like google will say otherwise... The original comment was also a quick question since we aren't there to experience it in person.

@atrain132 4 месяца назад

@@user-eu9ub8kj9j a quick search on any forum, or a search engine will say otherwise. The original comment was also a question since we're not there in person.

@atrain132 4 месяца назад

@@user-eu9ub8kj9j @user-eu9ub8kj9j a quick search on any forum, or a search engine will say otherwise. The original comment was also a question since we're not there in person.

@AK47s4EveryOne 4 месяца назад

I'm gonna go with main bearing failure! I love your videos and this project. i hope you can find a new engine!

@matt13ross 4 месяца назад

Fingers crossed!

@MrVangboi05 3 месяца назад

My guess is oil starvation. That engine oil sensor was just at about minimum and driving it in the hills would do it. Sucks that this happened to you.

@weaverhchrist 2 месяца назад

Id' say that the rod cap wasn't properly torqued and it came off, the rod/piston went skyward and collided with the valves/combustion chamber, one or both valves cracked the piston in 1/2 and there ya go!

@kilove1 4 месяца назад

Man o man 😮 dude can’t catch a break with the “ Beamer “ 😅😅 bad for Matt .. good for us viewers 😂😂😂😂👍💯🙌

@matt13ross 4 месяца назад

Hahahahaha

@violinmiata 4 месяца назад

Pushing a car, in rain and in crocks was a humanizing bit of character development! Yikes that cylinder is hamburger

@matt13ross 4 месяца назад

Hahaha, thanks!

@dylanjoyal9257 12 дней назад

Bring the m3 back to life plz

@matt13ross 6 дней назад

I am

@TomHamilton-rg7cp 4 месяца назад

Time to check out the GM engine conversion kits. Thats got to be a much cheaper route than a used engine of the same type and troubled history. Good luck!

@brokeq50boi80 4 месяца назад

😪 boring. Also these engines don’t have that much of a troubled history. The only major thing is changing out the rod bearings. Otherwise it’s just old plastic that can break and just send the car into limp mode. Also this v8 makes the car what it is, if he’s going to ls swap it he should’ve bought a different bmw like a 335i with a blown engine

@TomHamilton-rg7cp 4 месяца назад

@@brokeq50boi80 good points so let's see what he does. A used engine isn't going to come cheap. Lots to consider here.

@brokeq50boi80 4 месяца назад

@@TomHamilton-rg7cp yeah there is a lot of engines to consider. I personally think the tt v8 from the newer m5’s would be unique. Also it’d still technically have a BMW heart. It’d just be a shame to buy one of these now increasingly rare v8 m3’s just to swap the engine out. I just wish the motors for these cars weren’t an arm and a leg brand new

@chuckehrlich 4 месяца назад

There was white smoke coming from the exhaust tips. Clear sign you were burning oil.

@bekabeka71 3 месяца назад

This is why if I had the money I would buy an e36 coupe and keep it 👌🏼

@gizmo401 4 месяца назад

if the m3s are the same as the sedan e90s, the tow hook it inside the battery cover in the trunk. pull up the grey carpet piece in the plastic and the tow hook is under it

@matt13ross 4 месяца назад

Mine is missing.

@diegohooker 4 месяца назад

Oof that sucks. Had this same thing happen to e92 m3. A new (used) motor cost me $8k and I had a local shop swap it out (along with every gasket and preventable maintenance while it was out) for $7k. I would highly recommend M539 Restoration's video series. Even though I didn't swap the engine out myself, it was great to learn how everything worked and what parts I needed to order

@justfasial01 4 месяца назад

Did they replace main bearings also? just curious

@diegohooker 3 месяца назад

@@justfasial01 No my mechanic advised me that's its too expensive to be worth doing as its a lot more intensive of a job than just doing the rod bearings.

@StefGio428 4 месяца назад

I use to watch ya e36 vids while ago, I’m back for the e92 g/l and keep entertaining us. Also nice truck and Porsches

@JCe92m3 4 месяца назад

When you showed cylinder 3, my jaw dropped🫣

@terrynewman1679 4 месяца назад

Whether you like it or not, the proper way to replace bearings is to remove the engine . Strip it completely and clean every oil passage because there is definitely somewhere an obstruction to cause a blockage to oil supply and that is the worst enemy of a high performance engine. Replacing the bearings from underneath is not the way to go. Going the quick fix way will lead to catastrophic failure.

@joepaquette7435 4 месяца назад

Time for the ls3 twin turbo mod! Make BMW's great again. I'll be here viewing and enjoying what you do!

@TheReaper42069 4 месяца назад

Right?? I’d LS if I planed on keeping it for sure

@noahhiguera8114 4 месяца назад

why would he ruin a great driving car with a overpowered unbalanced engine?

@TheReaper42069 4 месяца назад

@@noahhiguera8114 unbalanced??? How so? I bet it weighs the same as the boat anchor of a motor is has currently?

@noahhiguera8114 4 месяца назад

@@TheReaper42069you kids are funny, just because you slap in a motor that makes a gazillion horsepower doesn’t mean it makes the car better… it literally ruins the characteristics and the whole purpose of it being what it is. also, s65 weighs less than a LS3 and that’s without those gay ass twin turbos

@NewEdgeDesigns 3 месяца назад

I have a beautiful 5.3 vortec for sale cheap 190k miles, just broken in..

@livinglifeboosted1642 4 месяца назад

I wonder if if it jumped timing and shared a valve off which caused the piston to explode taking the rest of the engine out on the way down I have had many of these engines and the only time I’ve had them fail is when it has been Rod bearing related I did notice in your clip when you started it there was quite loud rattle for a few seconds while oil pressure was building and this could’ve been a bad timing chain so it would be interesting to see if it is actually jumped timing The loud rattle could also have been lower oil pressure or a lazy oil pump theory of course

@camforcars3412 3 месяца назад

Those normally aspirated V8 & V10 BMWs have an inherently bad design having to replace rod bearings is almost a service item I’ve never heard of anything like it in 55 years of being in the motor trade , my 535D remapped with mods 390 Bhp 270000 miles still sweet

@tonygoshive785 3 месяца назад

I like how are you so clam after what you discovered. I wouldn’t be able to hold it together. Especially if I’ve just bought it. If I remember correctly, these engines are prone to rod bearing failures? Am I correct in guessing that’s what it was?

@coreysebesta 4 месяца назад

Not sure what the budget is on the motor but Ghassan has a rebuilt for $11,900 two year warranty

@BooTub3 4 месяца назад

First time watcher here 😳 And I thought my day was bad.. Just subbed, hoping to see BIG things from you. Nice Porsches too

@PompeyMatt17 4 месяца назад

maybe spun a rod bearing allowing the piston to rattle in the bore and hit the valves

@bobl78 3 месяца назад

maybe the timing chain broke or jumped. The sound in one of your other videos sounds very much like a timing chain issue

@alechappy2070 3 месяца назад

BMW = Big Money Worries, so sorry for your loss. Toyota once made a port injected Motor called 2GReat - F%6kng Excellent... It does 6,500 rpm + everyday, all day and the timing chain never needs replacement. But do change your oil/filter at 5Kmiles... only the Buick 3800 V6 is tougher

@carsorsomethingidk 3 месяца назад

I know you bought this car for RU-vid content, but I think this should be a clear lesson to anyone out there to generally always avoid the cheapest examples of enthusiast cars. Honestly with it being $12k I would’ve absolutely had the expectation that the engine was likely cooked, and considering that he told you it was making some strange noise that you didn’t hear yourself, I suspect he probably knew to some degree that the engine was bad and that’s why he had parked it for years.

@bpoautomotiveholland495 3 месяца назад

Startup with new exhaust at 0:55, first seconds running sounds very like a beginning rod knock.. if that sound is heard, might as well trash it cause theres no saving from once youve heard that.

@matt13ross 3 месяца назад

It's made that sound since I got it.

@drrightwing4435 3 месяца назад

Spun bearing locked the rod up which in turn caused the rod and piston to shatter

@camcam1676 4 месяца назад

well the sound sounds like timing chain and tensioners where worn out. or the rod caps got mixed up. or the rist pin failed.

@Raizor5000 3 месяца назад

Not sure if this information helps you in any way, but H2 Motors in Germany is probably one of the best names when it comes to S65 engines.

@williammorris3334 3 месяца назад

I wanted an E92 for years. Watched all the fanboy channels,but then I started learning about 8 mpg when driving it hard, throttle actuators and rod bearings and BMW in general. I ended up with a 981 Boxster S and because of its design I can do all the maintenance myself. Once the panels are removed everything is accessible as it can be with a mid engined convertible. My car gets 17-19 mpg when driven hard in the mountains. Because it weighs 600 pounds less it is actually just as fast with the PDK. The interior quality is much better than BMW. The car shares about 2/3 of its parts with the 911. I say all this for those contemplating a sports car.

@IvanKorsinsky 3 месяца назад

If your concerned about MPG you shouldn't be looking for a sports car. If your concerned about reliability you shouldn't be looking for a sports car. Those are just attributes that come with these cars. It's to be expected.

@R03333 3 месяца назад

981 is more expensive than the E92 though. Plus only a 2 seater, can't put the dog in the back seat.

@TassieLorenzo 3 месяца назад

@@IvanKorsinsky Hmm, the original Acura NSX was a sportscar that competed against the BMW 850i^, Ferrari 348 and Porsche 964 and others and is basically as reliable as a Honda Accord? Same for the S2000 that is basically as reliable as a Civic? 🤔 It certainly can be done. ^ (I guess the BMW 850i was more of a GT back then, they did have the Z1 roadster in '89-'91 or you could count the E30 M3 as a sportscar despite the more sedan-derived body style. I guess the S2000 was a competitor to the basic 2.5 Z3, but not necessarily the more powerful Z3 M.)

@bucke5108 4 месяца назад

Oil change every 30 000km... that's it.. We in Europe change oil on normal cars 10-15k km... on special cars like e92 m3 probably 7-10k.. When u put new engine in the car, make sure to change oil on time. Your engine will be happy... and your bank account :) Good luck with m3 :D