Тёмный

MY FPV SIGNAL SUCKS?! 😤 WHY? 

Mr Steele
Подписаться 509 тыс.
Просмотров 139 тыс.
50% 1

NEW MR STEELE DISCORD SERVER / discord
Patreon - / mrsteelefpv
Ready To Fly Mr Steele Drone - bit.ly/2RMwbET
ETHiX is my Company & we aim to refine FPV.
Please check us out - ethixltd.com
_ ETHIX APPAREL _
- Triple E Hat - bit.ly/2zxBx0g
- Black Ethix - bit.ly/3fE0RCq
- T Shirt - bit.ly/3duvgkO
- Hoody - bit.ly/2yBtAr7
- Beanie - bit.ly/3fEPydn
- Stickers - bit.ly/2WJmFEh
MY personal Amazon Shop.
www.amazon.com/shop/mrsteelefpv
Please Follow me on other platforms
TIkTokP: / mrsteelefpv
Instagram: / mrsteelefpv
Facebook: / mrsteelefpv
My PODCAST (CHECK IT OUT)
teamfailsafe.libsyn.com
_MUSIC _
Outro Tune
MIss Li "Stuck In The Sand"
_ Kwad Gear _
- Drone Frame - bit.ly/2SWdNKd
- 6S motors - bit.ly/2znYfVB
- 4S Motors - bit.ly/2NBN185
- **NEW FC - bit.ly/3neYhX0
- **NEW ESC - bit.ly/3qXUwr5
- **NEW Props - bit.ly/37gmGpI
- FPV Cam (camera tilt 25°) - bit.ly/3czLZTC
- Ethix FPV Cam Micro - bit.ly/35WedFN
- NEW* Video transmitting antenna - bit.ly/2YURw3w
- Video Transmitter 800mW - bit.ly/2MH5KPZ
- 6S Battery - bit.ly/2HvLY5E
- Ethix Battery Strap - bit.ly/3fEC419 & bit.ly/2yOR241
- Lightweight HD cam - amzn.to/2WN1IIl
- New HD Cam - amzn.to/2Lpmrg1
- Old cam Lens protector MUST HAVE! - amzn.to/2O9ehso
- New cam Lens protector MUST HAVE! - amzn.to/2NzQmkW
- ETHIX Gopro Protection - bit.ly/2YSFQhx
- Ethic GoPro Strap - bit.ly/2AdIsfy
- NEW* ALL UP WEIGHT - 596g -
_ ETHIX Packing Gear _
- NEW Back Pack - bit.ly/329rVDr
- Radio Bag - bit.ly/2WlMgnw
- Heated Battery Bag - bit.ly/3bl6YbG
- Tool Kit - bit.ly/2YUTcJZ
- PROP Bag - bit.ly/2Wm7Qbv
_ Radio Gear _
- Ethix Neck Strap - bit.ly/3cm0E52
- Radio - X9d -
- Radio Transmitter (long range) - bit.ly/2PglGqw
- Radio Receiver - bit.ly/2OE6NNK
_ Goggles _
Ethix Goggle Strap - bit.ly/2WKCwT0
- NEW FPV Goggles- bit.ly/2TI3UkN
- **NEW FPV Goggles Receiver - bit.ly/2PP5WzH
(Antennas)
- **NEW FPV Receiving antenna (omni) - bit.ly/30mTSrl
- **FPV Receiving antenna (patch) - bit.ly/3bsS1rl
- Ear Bud (for Quad Audio) - bit.ly/2MALJdG
_ Battery Charging Setup _
- Charger- amzn.to/2nKx0Pe
- Power Supply - amzn.to/2MPLI2k
- Parallel Charging Board - bit.ly/2MiCDTw
- Battery Checker - bit.ly/2yNyBg3
_ Home Camera SETUP_
- Sony A7 cam - amzn.to/2GzAleG
- Macro - amzn.to/2Ds9v4D
- Wide angle - amzn.to/2HZzQfV
- fluffy critter - amzn.to/2mCL9xo
_ Tools/parts _
- ETHIX Prop Tool - bit.ly/3couohD
- Tool Kit - bit.ly/2YUTcJZ
- ETHIX builders cable set - bit.ly/2WKCSsT
- Field Soldering Iron (literally, best thing I have ever purchased)
bit.ly/2PhoOma
- *Soldering Iron Cable (need) - bit.ly/2MtqB8T
- Quality solder - amzn.to/2uJ89z3
- Quality Electrical Tape - amzn.to/2mzWkqp
- Quality Heat Shrink -amzn.to/2uH96rP
#FPVFreestyle #Ethix #Drone

Развлечения

Опубликовано:

 

13 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 463   
@xjet
@xjet 3 года назад
The single largest problem I see is people who fit a patch or other directional antenna and then fly with their head down so that that antenna is simply point at the ground a few yards in front of them. That will *significantly* compromise the integrity of your signal because you're effectively only flying on a single omni and your patch does virtually nothing. If people want to fly with their head down then make sure the patch/directional is angled upwards to compensate so that it is effectively pointing at the horizon.
@MrSteeleFPV
@MrSteeleFPV 3 года назад
Yes yes yes ! And minimize the Stevie Wonder if you can haha. Glad to have you here Bruce
@hallio111
@hallio111 3 года назад
lol yeah.. I don't understand why people do this.. to me it comes natural to point the head into the sky really... or locate with the ears where the noise comes from.. Iam a musician so I guess it helps to locate audio signals and deal with reflection .. but again.. do people really fly in the sky and basically stare at the ground? not only that.. somebody that builds a quad should basically get the relation between his video signal and where the quad is, and also, how the position of the quad (antenna) relates to that.. basic knowledge if you ask me:)
@AlexKaratzky
@AlexKaratzky 3 года назад
Lmao I only noticed I did this a few days ago... I decided to orbit myself for fun one time and I was looking pretty much straight down. No wonder my video sucks.
@erlandfpv
@erlandfpv 3 года назад
Yes, so many people headdown the patch to the ground... maybe they think it will reflect the signal? Hhhh
@prottentogo
@prottentogo 3 года назад
@@hallio111 same here. when I do a powerloop my eyes try to see what's coming next. so I look up. why would I look down?
@xjet
@xjet 3 года назад
Your description of rolling shutter effect is incorrect. What you describe (static rotors on a heli) are actually just an effect of a fast shutter speed. Rolling shutter usually produces an angling effect on verticals when using high pan/yaw rates. This can translate vibration into "jello". CCDs don't suffer from this because they have a global shutter so in effect the sensor data is frozen when read, whereas the CMOS reads a row at a time and the image can change between reads causing rows that are offset relative to each other. A small point though.
@MrSteeleFPV
@MrSteeleFPV 3 года назад
When I do a few 20 minute one takes I get slightly brain dead. But in this case I was legitimately mistaken. Always a mistake here and there. Thanks for the correction Bruce. Hope you are well
@sleepingbearffg5008
@sleepingbearffg5008 3 года назад
@@MrSteeleFPV two great icons in Hobby.. brovo.. made me proud to be in Hobby again.... Part of mankind at this point.. lol 👊👊💪💪
@joelperez.
@joelperez. 3 года назад
Damn, you know this shit...
@xjet
@xjet 3 года назад
@@MrSteeleFPV All well here, thanks for asking. Don't worry, I know how the brain-fade works... just wait until you get to my age and it becomes a *real* problem! Love your stuff and you covered all the right bases with this video. Great work.
@brendethedev2858
@brendethedev2858 3 года назад
@@xjet it makes me happy to see kind friendship between you two young and experienced folk ^_^
@Ammoniummetavanadate
@Ammoniummetavanadate 3 года назад
One other tip: Clean your SMA connectors every once and a while. Especially with cheaper SMA connectors you can get some metal dust or plating ending up in the connector which can reduce performance by quite a lot. I use alcohol and a q-tip to clean them out.
@littlebird.20
@littlebird.20 2 года назад
Or just buy extras and replace... they're like the least expensive product that exists. Mine feel wiggly after a while. Good tip tho 👌
@ChainsawFPV
@ChainsawFPV 3 года назад
You kno how much money you have cost me???!!!! And yes its all your fault!!!! You got me hooked!! You turned me into an addict!!! You were my first FPV video just over a year ago now, and god damn I love you for it!!!! Thank you!!!!!
@msky33
@msky33 3 года назад
😂 If just had read the first sentence I would have thought you were truly pissed 😂
@shadowofchaos8932
@shadowofchaos8932 3 года назад
The feeling of going out and just flying. The fun and freedom is totally worth it.
@Plur307
@Plur307 3 года назад
I realized I don't need to have the newest and best parts. The hobby got a lot cheaper for me when I stopped replacing perfectly good parts just because something 10% better came out. I also stopped buying spare parts. I only build complete quadcopters. I noticed I would buy spares, then something better would come out and I would buy the new stuff and never use the spares. Spare quads are better than less quads and lots of random parts.
@justainchoe
@justainchoe 3 года назад
Really appreciate your videos man. A lot of good content delivered in a good pace so that the viewer doesnt get bored, but also clear and articulate enough to understand everything you're explaining. Also never asking people to click affiliate links and never sounding like you're selling stuff. Great videos, content, and advice! Thanks dude!
@fpvcruzer
@fpvcruzer 3 года назад
Thanks for taking the time to make this video. It helps clarify next steps for improving my fpv signal.
@elis51501
@elis51501 3 года назад
You have been my favorite pilot since I started, like (4) years ago, you’re an amazing pilot that to this day motivates me to fly and and practice after watching you maneuver/pilot your Aliens and now Apex:) thanks 👊🏽
@michaelmatthews6421
@michaelmatthews6421 3 года назад
Love how you can explain things and it makes sense. Very informative.
@Backroads_FPV
@Backroads_FPV 3 года назад
Great info, I like the idea of the dual regulation system for the power. That makes so much sense to do. And it makes much more sense now on why most 5v switching regulators don’t last. Never knew how they worked.
@jpprice6464
@jpprice6464 3 года назад
Thank you for the motivation for getting into FPV 👍👍
@novideos101
@novideos101 3 года назад
Thanks allot for spending time of your day to share your knowledge of years of experience with the rest of the FPV community! It's always a pleasure to watch your videos specially to watch you fly as you make it seem so easy!
@MrSteeleFPV
@MrSteeleFPV 3 года назад
🙏🏼. I’ll Post more flying then
@novideos101
@novideos101 3 года назад
@@MrSteeleFPV 👍 But please do also continue sharing your knowledge, whenever you feel like. Just keep on being yourself and doing what you love cause it makes a lot of people's lives happier!
@GilboRC
@GilboRC 2 года назад
Hi, superb video really appreciate it it helps me as a newbie so much. You are person who got me into FPV and as a newbie 2 years in your videos still make me want to fly day after day. Thank you 👍
@tylerelliottFPV
@tylerelliottFPV 3 года назад
Twist your wire with a Ground wire. They call it “twisted pair” wiring. It’s a poor-mans shielded conductor.
@Gosuminer
@Gosuminer 3 года назад
Wouldn't actual shielding be better still? I mean it's all but impossible to used shielded cables throughout your quad and there are almost always ground pads nearby to ground the shielding.
@tylerelliottFPV
@tylerelliottFPV 3 года назад
@@Gosuminer overkill
@robharrison5452
@robharrison5452 3 года назад
Good video and out of all the “FPV Bosses” you are one that I take advise from and learn from. Keep up the good work!!
@LostSoul5467
@LostSoul5467 3 года назад
Thank you senpai Steele, your knowledge is always appreciated 🙏🏼
@rscottwilson1
@rscottwilson1 3 года назад
Thanks for talking fast and getting right to the point. No fast forward necessary during watching. Great info. Didn't know about the receiver grade A B C etc. Thx.
@stickboyfpv4742
@stickboyfpv4742 3 года назад
Thanks for this Steele! You the man brotha! God I wish I could fly like you🤣 Hope airythangs good🤙
@potatopilot1699
@potatopilot1699 3 года назад
Gotta love a Mr. Steele video when it does come out.
@isaaclanier1507
@isaaclanier1507 3 года назад
Literally the one question I ask every video, you are truly the chosen one
@joachimlarsen2k
@joachimlarsen2k 3 года назад
Ever since I got the money to start flying your exact setup I've literally had zero problems. Knowing I can just charge my shit and go out and fly and that it just works every time is so freeing.
@SimpleMeFPV
@SimpleMeFPV 3 года назад
😂 your awesome, ♥️ the intro 👍. Appreciate the FPV help
@KYLEFUCKINGMILLER
@KYLEFUCKINGMILLER Год назад
nice refresher, got out of the hobby for a couiple years, nice concise video to bring me back up to speed thanks
@toddspeck9415
@toddspeck9415 3 года назад
That was a super awesome overview. Thanks Mr. Steele.
@KnizzleHizzle
@KnizzleHizzle 3 года назад
That's one crazy speed talking one shot explanation, kudos Mr Steele, kudos!
@LuxFlascH
@LuxFlascH 3 года назад
I had bad video all the time. TBS Fusion with the VAS Antennas changed everything. Video is incredible
@mikes.2279
@mikes.2279 3 года назад
Thanks GREAT info I just got ORQAs and a rapid fire using you antennas.
@ProjectMockingbird
@ProjectMockingbird 3 года назад
Dude, thank you for explaining "A bin, B bin, C bin". I have tried to explain that about tiny micro motors that seem to be "from the same manufacturer." Back in the hey day of brushed motors the very best and expensive ones had an 18% variance in power and life...and the cheaper ones were crazy higher percentages.
@MrSteeleFPV
@MrSteeleFPV 3 года назад
It’s a real Thing
@gee4zfpv
@gee4zfpv 3 года назад
Great vid for analog tips! - I still have one Apex and one Alien (all Steele setup) in analog and have rapid fire and FS HDO2 goggles but rarely use them now after converting another Apex and Alien to digital- I just like being able to go further out and behind buildings and through trees with hardly any signal loss and worries. The only thing I don’t like about digital is when you are way far out and get behind a few trees and start seeing lag- but the way I see it is if I was flying my analog quads I would not ever be out that far anyway. I love all FPV but am really enjoying how well I can see with digital. I might just have to pick up a fusion and those antennas tho to give that a try- Steele’s setups have always been awesome in my experience.
@an_R_key
@an_R_key Год назад
Steele, I did what you said in this vid and purchased the antennas. I'm very impressed. Worth every cent I paid for the two antennas. Brilliant products!
@xmonstar420x
@xmonstar420x Год назад
Thank you for the thoroughness. 🤙
@BenCrashin
@BenCrashin 3 года назад
Love it bro. Keep doing what you do.
@BobieFPV
@BobieFPV 3 года назад
Thank you mr. Steele!!!
@ceasarswain4530
@ceasarswain4530 3 года назад
Man this was amazing helps me out a lot
@oneperspective8601
@oneperspective8601 3 года назад
Unify v3 is so tiny but solid as hell really powerful. Love the 5v
@davidbanjoko185
@davidbanjoko185 3 года назад
OMD tysm i was looking for a video like this for so long but no one has made a video on this ty
@jlarson42
@jlarson42 3 года назад
Very informative and helpful video. I'm so close on my Fettec to being awesome build, got some video noise( flies great) . Not impressed with the regulator I'm using. I'm ordering an Impulserc board now. Thanks 👍🤓
@meltonenterprises6761
@meltonenterprises6761 3 года назад
Great mind reading! Your microwave looks much better than mine. 🤣🤣🤣 checking out your server next. Thanks for the insight on the gear.
@MCsCreations
@MCsCreations 3 года назад
Fantastic tips, dude! Thanks a lot! 😃 Stay safe there with your family! 🖖😊
@LarscoFPV
@LarscoFPV 3 года назад
Great video!!! Thanks for all the hard work on providing us with all this info. In my opinion. Everyone new starting this should start with anolog. There is a lot to be learned and gained from choosing this path and will only benefit you if you are serious about learning this hobby. This comes from a pilot that is now digital but still flies analog quads and flew them for close to 3 years. 😉
@wyattkurt9177
@wyattkurt9177 3 года назад
This video was super super helpful. Thanks!
@machafpv4049
@machafpv4049 3 года назад
i feel its simpler than all that with you get better stuff and service, either you buy it once now for alot or you end up buying it later for the same but you pay for it twice since you bought the cheap stuff first also you do alot, your videos are what got me into the hobby
@baadlyrics8705
@baadlyrics8705 Год назад
That makes sense.. im searching for what antennas i should buy.. one omni for my nazgul evoque and a omni and patch for my goggles for analog but im not sure, what exactly i should pick..
@raffyturc
@raffyturc 3 года назад
nice! also started using headphone to monitor motor rpms.
@javagadro
@javagadro 3 года назад
The way he turns around in the chair at the beginning reminds me of Dr. Claw from inspector gadget!
@y_i_fly5418
@y_i_fly5418 3 года назад
Ordered some antennas for my Skyzone O2X’s. I know, I know, they’re not Fatsharks but they do have a decent module built in. Great job Mr Steele.
@doktordrone
@doktordrone 3 года назад
thanks so much for this exlanation, man. yes i've learned from you
@msky33
@msky33 3 года назад
First off I would like to say thank you for taking the time to make this video! You really made it easy to understand on explaining the causes of video/receiver issues. Also I was glad to hear you explain why your quads are priced on the higher end. You usually get what you pay for. You rock bro! Thanks for inspiring me to get into this hobby and making laugh my ass off at times.
@maticrecer8361
@maticrecer8361 3 года назад
Almost 2am perfect time 4 some yt intertainment
@baggszilla
@baggszilla 3 года назад
Imagine if Steele said at the end of the video like BotGrinder " Now buy my shit" hahaha
@baggszilla
@baggszilla 3 года назад
He doesn't have to I do it anyway lol
@ChirpFPV
@ChirpFPV 3 года назад
@@baggszilla yeah I will buy his shit without being asked
@jeroenjegerings
@jeroenjegerings 3 года назад
He did say it not too long ago on a video of botgrinder. (to buy botgrinders shit, not his lol)
@reel1186
@reel1186 3 года назад
Now buy my weed
@evanbourgeois6606
@evanbourgeois6606 3 года назад
Good Antennas are so key. I’m running Eachine ev 800d on 600mw. I get great video through 2/3 concrete wall with not problem.
@bugsy742
@bugsy742 3 года назад
I have them with two VAS antennas and have similar penetration 👍
@rolandmagiera3728
@rolandmagiera3728 3 года назад
My videosignal on both big quads (5S and 6S with Rush Tank Ultimate V2 + foxeer 5) is extraordinary clear and clean. In my opinion two things are important, a capacitator and the small antenna-cable between the VTX and SMA should not touch anything conductable and it should also not too much bend. A constant curve or ideally a straight line in the antenna cable from VTX to SMA seems ideal. If the cable is too much bend or pressed inside the frame, it will almost definitely touch something which compromises the signal. This setup even works very well with the cheap Eashine EV800D beginners goggles.
@johnsargeant2041
@johnsargeant2041 2 года назад
Thanks for your videos... I did them alot. They deffently learn sumthing..
@MrCrowleyandhisdrone
@MrCrowleyandhisdrone 3 года назад
Thanks for the vid. Great info.
@sparx-86
@sparx-86 3 года назад
iv got a unify v3 thats 2 years old , been at the bottom of a lake before, and still works flawlessly. definately a solid piece of tech
@FlyerTuck
@FlyerTuck 7 месяцев назад
Hey, best wishes from Central Texas.
@Cyber_Boy905
@Cyber_Boy905 3 года назад
Just the intro deserves a like😂😂😂
@MrSabram07
@MrSabram07 3 года назад
This is a great video, I learned something today. Actually multiple things
@margiejones2107
@margiejones2107 3 года назад
🤣 perfect intro, Steel,🤟
@djbis
@djbis 2 года назад
14:23, would be awesome to see your video on how you evaluate/measure your air space for radio interference during pre-flight and then how you adjust to it. thx for this video.
@srqTagle
@srqTagle 2 года назад
LOL, love the intro!
@leosouza2230
@leosouza2230 3 года назад
HELLYEAAAAH! THATS WHAT IM TALKING ABOUT! thanks for that mr steele!
@reworkfpv7359
@reworkfpv7359 3 года назад
Man you really do care about our FPV experience, thanks
@chrisscharfenberger6007
@chrisscharfenberger6007 Год назад
Great video! Thanks! I'm still trying to figure all this stuff out. I'm 54 years old with airplane, motorcycle & drag car addictions. Now somebody showed me an FPV drone. Those bastards....!!.....!!..... Looks like addiction #4 is well underway. And the way you fly. Damn dude. You kill it.
@Six2226
@Six2226 3 года назад
You sir deserve a reach around 🤟
@daft4682
@daft4682 Год назад
Correct on the video rx antenna. In 15 yrs working with point to point radios, I consistently observe that making the receiver more sensitive is better than making the transmitter more powerful.
@christopherj3367
@christopherj3367 3 года назад
about twisted wires, make sure to just twist Plus & Negative (red & black) wires to reduce EMF, otherwise if you twist 2 Plus (red) wires you'll increase EMF.
@DavidOwensuk
@DavidOwensuk 3 года назад
Thanks for the shout out! Another great video!
@MrSteeleFPV
@MrSteeleFPV 3 года назад
✊🏼
@proximityfpv1722
@proximityfpv1722 3 года назад
thanks for the vids! got all my stuff nailed down after 4 years. Thanks for all the input. Working on a 3rd backup, have 3 spare parts, bout to buy 9 extra motors (stout v3s) so I'm prepared for the drone pocolyps. Fly till I die. :) - you should say buy your stuff ASAP and get some of that panic buy money over the next couple years - then release new stuff. ;) Jk. lol
@Aasmayaa
@Aasmayaa 3 года назад
All this time always wondering why his analog DVR is so crystal clear like a digital Here comes the recipe Totally agreed with your suggestion to do Digital for beginners or ones who doesn't wanna hassle to figure stuff like receiver, antenna etc I started with Analog and move to Digital for easier experience
@Aasmayaa
@Aasmayaa 3 года назад
@Yourname Here yeah just wondering tho i don't use analog... Digital user here 😅
@sesarius
@sesarius 3 года назад
Thank you Big S.
@flyingfoxfpv6147
@flyingfoxfpv6147 3 года назад
Hey bro great vid im just starting out n tryna punch in as much info as i can your flying is insane!!! Im also from New Zealand n that last shout out look like a Māori last name Wairoa may be pronounced Y-RO-A i could be wrong but shot for giving it a stab G.C. 🤟😎🤙
@MrSteeleFPV
@MrSteeleFPV 3 года назад
🙏🏼✊🏼✊🏼. Thanks M8. One day I’ll make it down there and chill with you guys and the strayans
@Kman568
@Kman568 3 года назад
@@MrSteeleFPV STRAYA!!!
@AlexxMarssh
@AlexxMarssh 3 года назад
Hey Steele just so you know your latest drone is still the smoothest flying quadcopter i've ever had, could've saved a ton of money if i just spent the $$$$ before hand instead of taking the long road of trail and error
@Jaroneko
@Jaroneko 3 года назад
Thanks for the shout out! 💜 I had to do a double take to make sure I heard right, as didn't exactly remember whether I'm still a patreon or not. 😅 Turns out I am (and see no reason to change that).
@MrSteeleFPV
@MrSteeleFPV 3 года назад
🙌🙏🏼. Thank you !!!!
@akaKrypt
@akaKrypt 3 года назад
This was very specific for me, but my pigtail connector to my antenna broke when i removed it (so im guessing it was about to go bad) so i replaced it, i also switched out the little stubby antenna for one thats 5 inches long, my range went from about 50-100 meters to 1km with these 2 changes. (might be longer, rx is still frsky so i cant test) Obviously if you are doing heavy freestyle you won't want a longer antenna, but if you are just cruising or getting cinematic shots i highly recommend it, the interference is non existent almost and any orientation gives you good signal.
@lemoncfpv8434
@lemoncfpv8434 3 года назад
i just changed my vtx and rx antennas to a really long sma cable, hardwired together basically. much better signal now :D
@LuukBilly
@LuukBilly 3 года назад
finally. i have been having problems for soo long. Educate me mr. steele!
@timl4081
@timl4081 3 года назад
I only fly 2 Axii Lhcp or 2 Rhcp on my Orqa's with RapidFire. One long vertical and one stubby horizontal with a matching Axii on 5" quads as well as a small Axii on my Kabab Tp3's, Linear polarized and just a Frsky Rx antenna, (forget the name) with the center wire extended to approximately the correct length and I like it.
@jtcustomknives
@jtcustomknives 3 года назад
You had me with “Ramen Shenanigans”
@sunsetpark_fpv
@sunsetpark_fpv 3 года назад
New to FPV, I have had the most horrendous video and tried everything possible to fix it. After watching this video, I reached out to Fatshark, and they asked me to send them my HDO2's and Rapidfire as they were still under warranty. After a few days I got an email saying that my Rapidfire was defective and that they were replacing it and I am waiting for it now. Thank you for this video because I was really at the point of just giving up, and also considering saving money to buy DJI goggles.
@olafschermann1592
@olafschermann1592 2 года назад
I didn’t ever think about cascading regulators and external osd board. But it makes sense to separate video from motor outputs. How do you still measure the voltage? Does your osd module have connection direct to the battery?
@danarrib
@danarrib 3 года назад
Hey man, could you please make a video showing in detail how you are powering your electronics? Which regulators are you using, which LC Filter. This is not described on the video description and it would be super nice to know.
@xmltree
@xmltree 3 года назад
You mention not using SmartAudio. How do you change channel if your one is busy ? switch button on the Vtx ? Love your flying and thanks for sharing your experience
@MrSteeleFPV
@MrSteeleFPV 3 года назад
With the button
@philipandrew4819
@philipandrew4819 Год назад
I used to have analog with top end components but found the vtx would not last , but my main problem I could not work out , going from sunlight to tree cover the picture got very dark . Now with dji it just works in the sun , shade and never breaks . I’m sure there is a answer to my analog experience , but finding it all good now with more time flying .
@foxyfpv1323
@foxyfpv1323 3 года назад
I have to say, this video impressed me on a number of different levels. Refreshing to hear and see you give advice and help and not try and plug all your gear man. Found it informative and fun to watch and learn. Keep this kinda stuff coming please Mr Steele.
@mikeybroe1
@mikeybroe1 2 года назад
he’s gonna plug gear, he sells it for a living
@michaelwblade
@michaelwblade 3 года назад
I really learned a lot about my setup from this video thanks for sharing this with us. I’m running a SucceX force.800mW 5.8 and in betaflight I set it up for 800 mW to low power until first arm but it stays on 25 mW after I arm. Am I doing something wrong??
@Rckid28
@Rckid28 3 года назад
Any chance you can do a quick setup video with the kiss v2 and fettec 45amp esc or any esc in general?
@ra1nmaker001
@ra1nmaker001 3 года назад
4:01: That's simply incorrect. The rolling shutter effect distorts the image, the effect you mention does not. It simply is an aliasing effect produced when the motion of a subject in the image matches with an integer multiplier of the framerate of the camera
@Nine_883
@Nine_883 2 года назад
Great information. I know you are a busy man and this video is a cou0ple of months old, but do you have links for the OSD board and the Cascade regulator?
@ercyedgy6654
@ercyedgy6654 3 года назад
Thanks. I've heard that sma connectors are not made to be plugged/unplugged. What do you think about that ? I have the same video receiver and antennas for years now (rapidfire and vas), so i plugged/unplugged antennas hundreds of time and i think my video reception quality is decreasing. I think i will buy a new receiver and antennas.
@bladesfpv4179
@bladesfpv4179 3 года назад
I appreciate the advice on the video side of the hobby. Keep up the great work my man!!!
@scottmilano2940
@scottmilano2940 2 года назад
“DVR”? Digital Video Recorder, or Reception? I love the HDO2 goggles, but the DVRecorder in them isn’t very good, and I thought you had a fix.
@colddash5598
@colddash5598 3 года назад
I’ve not seen a video about having interference at a flying site and testing or selecting a frequency that works better and against the interference yet...please do one of those. More tech
@KCQuadTronX
@KCQuadTronX 7 месяцев назад
great vid and it helped alpt thannks !!!!!!!
@timmytson1
@timmytson1 3 года назад
great video explaination why does my furious fpv module say c8 instead of R8 but it also has the R1 but idk i got to that lol....even say c8 is 5917 (R8)
@user-pj4ln7mj4o
@user-pj4ln7mj4o 3 года назад
in mr steel we trust amen
@bladeystudio
@bladeystudio 2 года назад
Excellent vid thanks for sharing but I don’t see the regulator listed please do .
@sherwoodp2738
@sherwoodp2738 2 месяца назад
Would you please provide source information on the Cascading (switching and linear) 5V regulators you speak about at 5:36. Thanks!
@luisfilipe1983
@luisfilipe1983 Год назад
Damn😮 for a second i thought there was a ghost at the door behind you...then realized the creepy moving shadow is just a big fan rotating😮
@bowenwilliam1986
@bowenwilliam1986 3 года назад
I am just getting in but seeing this and his grey hair makes me feel old cause I have been following him for years before I got into this
@raulcolladopoyatos4542
@raulcolladopoyatos4542 3 года назад
Could you make a video of the configuration that you have in the camera?
@chrisfpv5706
@chrisfpv5706 3 года назад
i use aluminium tape to stick on the back and the sides of the camera reduces alot of noise and gives a analog signal that almost as good as the fatshark hd :) also besides having a good camera good antenna's good vtx , good receiver module ,, ,, you also need good solder joints ,, on the whole quad ,, makes interfearance alot less :)
Далее
Giving up Analog? | Fatshark Dominator AVATAR HD FPV
27:38
🙌🏆🙌 #36Ligas #RealMadrid
00:16
Просмотров 3 млн
ПЕЙ МОЛОКО КАК ФОКУСНИК
00:37
Просмотров 3,6 млн
Impromptu Turkey One Take | FPV Shot Dissection
8:16
My 7” drone that RIPs! | Apex EVO LR | FPV
20:44
Просмотров 48 тыс.
Learning FPV Drone Freestyle (In One Week!)
15:45
Просмотров 402 тыс.
Drone Controller + Simulator (How To FPV 2020) part 1
22:52
Most FPV pilots need to watch this soldering tutorial
49:51
How Much G-FORCE Does an FPV DRONE Pull?!
23:42
Просмотров 151 тыс.
ОТ КОПЕЙКИ ДО МИЛЛИОНА
1:00
Просмотров 5 млн
#природа #шортс
0:20
Просмотров 1,2 млн