My FPV toolkit just got a MASSIVE upgrade -- AND I LOVE IT.

Подписаться 333 тыс.

Просмотров 19 тыс.

50% 1

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
The tool pouch shown in the video is: amzn.to/3yf2Fj1
The Lumenier 14-in-1 toolkit is: bit.ly/3gAnjkQ
The rest of the tools in this video are linked at www.fpvknowitall.com/ultimate...
MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
---
00:00:00 - I love organizing things!
00:01:09 - My new toolkit. Love it? Or not.
00:03:26 - Leatherman Wave
00:04:27 - Break-off utility knife
00:04:50 - Forceps
00:05:22 - Cross-lock tweezers
00:05:47 - Lumenier multi-bit driver tool
00:09:26 - TS100-style soldering iron
00:10:00 - Flux pen and solder roll
00:10:26 - Diagonal cutter. Soldering iron tips.
00:11:17 - 3rd hand and brass sponge
00:12:13 - Odds and ends

Опубликовано:

11 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 125

@MrJohnston123 Месяц назад

Get a $2 toothbrush holder for the soldering irons and you can leave the tips on and they won’t get damaged

@ChrisGripeos Месяц назад

I just use a soft-shell pencil case… they cost $5 and are usually build pretty tough.

@gadgetrc94 Месяц назад

I 3d printed a handle that fits my MIP bits out of PETG. Perfect size. Works great.

@kevinsmith9420 Месяц назад

While on the subject of OCD, how do you deal with the corner of the rug behind you?

@mikebasmajian8135 Месяц назад

Great. That's all I could stare at....😁

@johnnyrt_fpv Месяц назад

I got crazy in this soldering iron. Your videos are always good, thanks joshua! 👊🏻🔥

@AchronTimeless Месяц назад

I made one out of a military tear-away First Aid Kit pouch. The molle webbing system lets you swap in tool pouches, water bottle holders, etc on relatively cheap main backpacks as you need them instead of paying 3X the cost for a FPV specific bag. My latest useful find is a fold up "magazine dump pouch" to drop drained batteries into as I go instead of messing around trying to organize or put colored caps on them as I go. Attached right to the side of my $50 bag.

@Maxhotgo Месяц назад

regarding the lumenier bit drive tool: ive had great experience with the brand wiha, they never get torn! and there are long bit sets aswell!

@oschenjdsouza Месяц назад

The forceps are surgical instruments Artery forceps Needle holder (blut nose) Ps I am a surgeon learning fpv...

@simplyjtme Месяц назад

Thanks for the video, love organization videos! I recently bought a holder for my omnifixo on Etsy. It’s pretty cool it can hold your iron, the magnetic arms, spool for solder, spot for brass and a holder for the iron when it’s hot. The omnifixo acts as the top and the base has magnets for it to stick.

@alexchulzhanov Месяц назад

I have a similar thing going but with a Torvol tool bag, absolutely love it especially the super high quality precision screwdrivers.

@HelloDonkey9 Месяц назад

The link to the bag took me to some other bag.

@jwaller89 Месяц назад

Same

@jas-FPV Месяц назад

Me 2

@flyinbots Месяц назад

Me three

@g36pilot92 Месяц назад

Same

@bulufish8208 Месяц назад

Please fix the link Joshua.......................

@PortalFPV Месяц назад

Organization will set you free 😊

@protec2869 Месяц назад

I got exactly the same screwdriver kit from aliexpress for 20.- just without the lumenier logo 😂

@HelloDonkey9 Месяц назад

That engraving cost more to do than it cost to make the tool.

@alexwolfe957 Месяц назад

How do you find it?

@susgreg Месяц назад

@@alexwolfe957just search for “hexagonal screwdriver rc set” something in that direction and you will find it

@AchronTimeless Месяц назад

Yeah, just found one in black/gold for $25 with free shipping, same exact bits and handle shape.

@djSpinege Месяц назад

I used to chew through Hex Drivers until I got some Wera hex driver's. Only ordered the two sizes I need for FPV.

@genjitsu7448 Месяц назад

My storage cases are a source of joy and pride to me - I really appreciate when things are organized properly! I have rebuilt my "core" toolset a few times over the years and I am always looking to see or learn about something cooler, lighter, more compact, etc... I followed your links - the heatsink tape is CRAZY expensive (not overpriced, just a lot on the roll that you don't need...) I recently mounted a heatsink to my DJI03 with the same thermal pads that I use on my computers and it seems to have improved temps by a degree or 3 so not bad. That bag you linked is a great deal! - I have many pouches similar in construction to this one in my work backpack for my computer accessories, for tools, etc... and they have held up (to admittedly moderately light abuse).

@MCsCreations Месяц назад

Great set, Joshua! 😃 Thanks for the review! Stay safe there with your family! 🖖😊

@thisisbhm Месяц назад

Not a review.

@LetsGoBrandon888 Месяц назад

Very nice!

@adriancp9957 Месяц назад

Exactly what I was looking into.

@RobertDunaway Месяц назад

Great video and insights! I use the TBS gear bag w/ the Ethix drivers.

@Not_Eric_ Месяц назад

I have much of the same but also zip ties, super glue, bandaids, spare screws and battery straps. I found a bigger pouch tho. I think you can find a variety of sizes of these by looking for “molle admin pouch” or something like that

@gus8378 Месяц назад

I think a Victorinox SAK with pliers is the perfect balance between forceps and the big Leatherman pliers

@flowstate_link Месяц назад

I have that tool (which you are not sure about)… I was also not sure but - having used it for over a year …. It is absolutely awsome. You can get an adapter to the smaller bits. I find myself using it for all kinds of things were normally I would use an impact driver or drill (okay not FPV)… this is just quicker and easier for many jobs! Try putting some various tips and this tool in an easy to reach place and you will find it is really great.

@supergeek02468 Месяц назад

RaceDayQuads has a mini hex driver that I love in my travel pack. It’s $13 and stores all 4 bits in the handle nicely. I also travel with a leatherman, so I use that for Phillips/flat fasteners in the rare instances I need them in a drone.

@charlesestes4530 Месяц назад

The forceps in my hobby box are a 50+ year acquisition. The faces of them have a shallow cross hatch that allows me to grip a wire with fragile insulation without fear of damaging that insulation. The forceps available to the average consumer today are all made in China with deep serrations in the face of the jaws. My forceps were made in the USA and were designed to not cut or tear tissue. They are expensive but in my opinion worth every penny.

@unRealityFPV Месяц назад

Electric Screwdriver like the one from XIAOMI is a necessity for my kit. It makes repair work soooo much quicker and easier.

@dpear3 Месяц назад

You should check out the electric screwdriver from Vessel. I know you like your Dewalt gyro but the Vessel is a bit more nimble, would fit nicer in your case, and has a ball handle that allows a bit more control in the hand and an easier transition between quickly zooming screws in and finishing them by hand. I have one of their manual ball-grip bit holders and I swear by it. They do have a few different models of electric screw drivers that vary in usage. But Japanese brands have a cult following so there’s plenty of RU-vid reviews that’ll tell you everything about their 3-4 models.

@jasonbeamish5576 Месяц назад

If it wasn't for Bardwell, I'd have a lot more money.

@Super_Mario_Fpv 25 дней назад

Missing a smoke stopper. Loved the video

@MrImmaculate42 24 дня назад

You may have loved the video, but did you watch it? He pulls out his smoke stopper at 12:15

@joebuckingham3521 Месяц назад

Mine is largely the same, even down to the leatherman (although i use a wingman), i also recently added a cheap toothbrush and a little 20ml spray bottle of isopropyl, have been looking for a better solution to carry everything as the torvol toolkit just isnt big enough for what i like to carry. great video, love organisation! 😂

@videsat Месяц назад

If you like to organize everything you have to have a leather officers map case! 😅 I have one and I just love it! In the back I have all the permissions to fly, in the front I put a map of the city I fly in and a daily plan. There is a pen, pencils, a line and a special tool to measure distance on the map. Also it always impresses police officers when I take permission papers out of the officers map case 😂 Do you want to get one? If you do - just whistle! 😊

@djSpinege Месяц назад

I keep my survival kit and first Aid in bag's exactly like that. you can find pretty cheap high quality First Aid bags that do exactly this.

@windwalkerfpv 27 дней назад

$70!🤔 I bought the same set on Amazon from HobbyPark.. It was $25 and shipping was free. For $25 I was stoked, the bits are holding up really well. I hope they gave it to you, otherwise, I am sorry for your loss lol. ..extra hand is cool, I might pick one up for my kit, thx.

@droney_baloney 6 дней назад

Dang was looking at the Lumenier tool to replace the full size drivers I keep in my field kit.

@pietronetutube Месяц назад

Welcome to my O.C.D. !

@strykerfpv Месяц назад

I. NEED. ONE.

@jonscot8393 Месяц назад

Hammer, Duck tape, Zip ties and Duck tape to hold it all. Only Jelly Balls would go over the top

@TheWalter777 Месяц назад

haha soon you go tactical. i have edc backpack. icludes tools, even a candy bar😉👍 sugested content..droneprepping? extra motors ,battery system?.. o the soldering tip? is it not solder on the new one? to keep them in goodhealt some dip them in solder before cooldown,wish you the best

@dfgaJK Месяц назад

🤔My wave doesn't have replaceable cutting edges on the pliers, I guess yours must be newer

@genjitsu7448 Месяц назад

I also appreciate an awesomely designed tool like that Lumineer driver set. Although I do not think that is the one I would go with, I feel I have something much better... Guess as long as I am going I have the Sequre Si012 Pro Max soldering iron - best one of the bunch if you asked me...

@runpuppyfpv5744 Месяц назад

Lol I was just looking at tools !!

@rippfpv Месяц назад

The rdq has the handle with bits tucked in to it

@Kylemestyle Месяц назад

I have electrical tape and zip ties in mine. looks almost like the one I use but shorter. medical bags are the way to go.

@BergeronFPV Месяц назад

Bro check out the 5.11 RUSH backpack , I'm ex military and swear by this product, this kit would attach perfectly on the molle webbing, Im ordering one right now lol. Thanks for the link ;)

@stephenwhite3828 Месяц назад

Yup. And all prop nuts should be built like wing nuts. Easy to tighten by the hand. Slight weight increase. But we are far past a gram of worry. And they have never needed a ratchet to get the correct torque. I’ll take 20% top line sales on a WRB.

@ChomperFPV Месяц назад

I prefer the less is more method, I NEED 10-15 tools depending on the different types of craft I need that day, but I try to use tools that can be used in multiple ways (no necessarily the way they were designed as long as it doesn’t change the quality of the job and the limitations within the field) this is an option for heavy field tool bag days for me. Thanks for the review

@TorontoFPV Месяц назад

much better than the cursed newbeedrone one!

@chuckchaffin3965 Месяц назад

The tool bag link takes you to the brands link i was able to find the the same bag by scrolling threw the other bag options that are just below the one displayed

@JoshuaBardwell Месяц назад

The correct one is: amzn.to/3yf2Fj1 Sorry about that.

@ShawnEngland Месяц назад

Man i just got my rotor riot took kit.... Time to upgrade.. again..

@MarsuCooper Месяц назад

I use the TBS FIELD DRIVER KIT, Similar, less drivers and cheaper.

@Ultra-Violet Месяц назад

Nice 👍🏻

@xrxfpv1994 Месяц назад

Recommended next step: Mount your monitors to the wall??

@vpr0 Месяц назад

LTT say that their screwdriver has strong enough magnet to not leave bits in screws. Mads Tech has a review of it. And I personally love iFixit

@sk1fpv Месяц назад

That enough tools to rebuild an LS engine in the bag. Love it

@jasonbeamish5576 Месяц назад

To be fair, you only need a 10mm and14mn to rebuild an LS

@sk1fpv Месяц назад

@@jasonbeamish5576 that's why I had to use that as an example 😂🤣

@xrxfpv1994 Месяц назад

Wow ❤

@mikedoesstuff3641 Месяц назад

The molle is not laid out correctly in this bag, you can’t mount it centrally on a molle backpack which is pretty frustrating. Is also really quite small

@adamhixon Месяц назад

I have that leathermen and it has a very mean pinch point when in pliers mode. It has bitten me several times.

@gabriel-hn5ok Месяц назад

lol dont show this guy a EDC toolkit lmao ...

@Hiasibua 14 дней назад

JB would make for such a nice flashlight aficionado 😂 Teach him Andúril 2 and he's gonna be all in!

@a-a-ron5911 Месяц назад

WHIA makes comparable quality Allen tools to MIP. And you can get a set of them without having to decode the MIP website which is just not worth it to me. I've been very happy with mine they're sized perfect and do not round off with excessive torque.

@LehtusBphree2flyFPV Месяц назад

Where do you pick up one of those 3rd hands magnets kits at? This is something I've been looking for.

@JoshuaBardwell Месяц назад

Omnifixo is the name.

@mantyfpv7409 Месяц назад

Need a 3D printing pen in that tool kit to fix TPU in the field!!!!

@iblackfeathers Месяц назад

are you sure you linked to the correct toolpouch? that one zips all the way down while the one at amazon is a different shape and zips more like a toiletry back, where you cannot fully open it up like in the video. they look similar because the velcro looks similar or is the same.

@JoshuaBardwell Месяц назад

The correct one is: amzn.to/3yf2Fj1 Sorry about that.

@x13102543 Месяц назад

when do we talk about walksnail goggle X analog part fixed?

@xfOL. Месяц назад

screw drivers kit same as basic Chinese tool you can find all around. but without x4 price for Luminier logo 🙃

@JoshuaBardwell Месяц назад

Yeah but I can't find a link.

@arquirc9470 Месяц назад

Hahaha nice 😂😂, what a good performance Oscar nominations jaajj

@PeteFPV Месяц назад

Not the same bag as the one linked

@JoshuaBardwell Месяц назад

The correct one is: amzn.to/3yf2Fj1 Sorry about that.

@stst8301 Месяц назад

Not available in Europe

@adamhixon Месяц назад

That link does not seem to be the tool pouch featured.

@JoshuaBardwell Месяц назад

The correct one is: amzn.to/3yf2Fj1 Sorry about that.

@johnfig3196 Месяц назад

I spy the same side cutters that come with creality 3d printers.

@rocketech Месяц назад

ok... there's a little dopamine. ;) I too suffer from Enjoyment of Organization.

@homerogonzalez2909 Месяц назад

wrong link for the pouch

@JoshuaBardwell Месяц назад

The correct one is: amzn.to/3yf2Fj1 Sorry about that.

@rudyortiz7881 Месяц назад

Link for the bag is different

@JoshuaBardwell Месяц назад

The correct one is: amzn.to/3yf2Fj1 Sorry about that.

@Robocopterfpv Месяц назад

$70 for that driver is absolutely madness. It’s definitely just a rebranded Chinese tool u see everywhere on Amazon.

@johnwalter6410 Месяц назад

wrong bag link

@JoshuaBardwell Месяц назад

The correct one is: amzn.to/3yf2Fj1 Sorry about that.

@benjaminscott1927 Месяц назад

The link to the bag is wrong

@JoshuaBardwell Месяц назад

The correct one is: amzn.to/3yf2Fj1 Sorry about that.

@benjaminscott1927 Месяц назад

@@JoshuaBardwell Thank brother

@popfpv Месяц назад

You can get the LTT Screwdriver with bits for 70 bucks or the small one for 10 bucks less. I would very much recommend that.

@smokessauce Месяц назад

Joshua.....quit making me buy stuff :) "Today you gonna but something..." 😂

@importon Месяц назад

sell it to me with all the tools in it

@mythrillium2 Месяц назад

I wish organization bugged me, but imo in reality, it's just gonna get cluttered again and the incentive to clean it up goes off the face of the earth to me

@serenestateofbeing1062 Месяц назад

The lumineer hex driver set is not worth the price. Ive had it for 4 months now and the allen key bit gets stuck in every screw for some reason. When you go to pull it out, the whole bit moves in and out because they have play and movement when inserted into the handle. Its just beyond annoying. Its got a magnet inside the handle for some reason because it already has a locking mechanism so bit just moves in and out when youre trying to pry the damn screw off of the allen key bit. I find myself using the allen key bits without the handle most of the time. Id recommend a high quality electric one 😂 don't buy this one bardwell is using

@DanoFPV Месяц назад

The funny thing is is Lumineers rebranded Chinese stuff lol,! Not the other way around

@serenestateofbeing1062 Месяц назад

@DanoFPV I actually don't have the lumineer one, it's a different brand I got on raceday quads. Still the exact same one

@bulufish8208 Месяц назад

Not the right link buddy............................

@JoshuaBardwell Месяц назад

The correct one is: amzn.to/3yf2Fj1 Sorry about that.

@stillededge Месяц назад

Ehhh...elastic retainer stuff...not so bueno.

@nuhbiwan Месяц назад

Sounds more like an ad.

@madsenfpv Месяц назад

First comment pin?

@slappomatthew Месяц назад

You had gods gift to modelers MIP dedicated hex drivers in your other kit, bits and handle in this new kit. Massive downgrade

@andrzej3511 Месяц назад

Want to do an actual good deed beyond just regular bragging? 1. Create a community fundraiser. 2. Create at least a hundred such sets (few hundreds will be not too much!). 3. Send it to Ukraine (or Ukrainian ambassy) for free. Hurry up and you will save many people's lives!!! And Ukrainians will praise you until the end of your and their days, maybe even a day longer! P. S. I am not Ukrainian, I live in a neighboring country. That's how I know how much they need EVERYTHING! They are not just fighting for a piece of their land. They are fighting for their "to be or not to be"! They simply want "to be"...