MY FRUSTRATION MADE IT WORSE - DYNA 4 REPAIRS ON THE MF 5460 

Great video as always. Your plug is quite easy to disassemble, just pull out the small orange piece on the front of the plug with a needle nose pliers which should allow you to pop out the terminals and seal.

It was broken before I broke it, “I just broke it a little more’ Heard that ones on sites before 😂

You can certainly get a job as a mechanic if the cow job folds up Adrian . Top class

Hi I just want to say you are the best RU-vidr you make me smile everyday thank you for everything

Ha Ha, I loved that intro Adrian. "It was sorta broken, before I broke it, I just broke it a little bit more, because it was broken already. LOL

Always great to see tractors minded and will hold their value.

Excellent video Adrian, its great to see you doing most of your repairs yourself, and it show other people that if you take your time it can be repaired without calling out a mechanic , jobs well done 👍

Great to see you turn your hand to everything Adrian. Fair play to ya. 👍

As always Adrian the farm and equipment keep you busy. We all get frustrated from time to time and this usually will cost us money. Thanks for taking us along. Have a great day!

Brilliant video, always learning something from your videos, you have a great pair of hands on you to tackle any job which in turn makes for a great watch. Honest hard working chap 👍🏼

Best part of my Sunday

Love the way it happens to the best of us,great video.

Brilliant video Adrian wish I could be as handy as you at fixing tractors well done 👍👌💪

Farming is so much more complicated than to plant and harvest. Adrian you have made it look easy. Thank you for sharing.🐄🐄

Great job Time and money saved doing it yourself

A stitch in time saves 9, you're a great man to keep fixing things. I always think when taking things apart well somebody put it together so there has to be a way to get it apart.

Enjoy the practical side of maintaining a farm. Thanks

Great video again Adrian. Keep up the great work

Another great video Adrian always Learning something from your video 👍👍👍

Nice one Adrian, great to be able to fix all the wee problems on the tractor, no bother to yeah, tidy bit of work, keep at her Lad!

Hi Adrian! New subscriber here. I really enjoy your channel. I love learning about farming life. I do have to say of all the channels I follow yours is the cleanest, tidiest farm I have seen .. so well taken care of. I can really appreciate that you love what you do. Thank you!

I can fully understand the frustration. Happens to me all the time. Then it's time to walk away before I destroy whatever is frustrating me. Thanks for pointing out that little screw release for the cap. Not that I have one of those but I would have been one of the guys with the screwdriver trying to get in the top. 😁. Have a great day Sir.

Great job! I have a Massey 4355 that needs a good whack on the dash now and again to keep the indicators working. Bad connection probably but the process of fixing it is more daunting than to just give it a whack…

Keep an eye on the lid accessing the aircon on top of the roof that its not starting to rust will save you alot of bother 👍

Hello from Canada

Good to see the dewalt tools back in action….😉

Always comes in handy , being handy 👊

Great video as always thanks

Happy Sunday

This is the best RU-vid channel followed by Tom Pemberton and funky farmer.

Great video Adrian

Patience is a venture and you seem to have lots 😁.great video as usual. 🚜👍🤠

you always find something different and interesting to share with us Adrian, great work bye the way, you should have you tubed that connector they actually come apart and you can push out the pins, there are special tools to get them out but a man of your means could get by with out them, I remember when shuttle shift started we thought it was revolutionary now look what they are doing I wounder where farming will be in 50 years, great video as usual Adrian thank you

Fine job Adrian. You can take them pulgs apart just pull out orange bit and you be able to get pin out .👍

Your the best

Top class video Adrian, you keep your tractors spotless, maybe sometime you could do a video of how you do an interior and exterior clean

Great video as always 👍

Cheers mate , good work.

Hello Adrian so interesting watching your videos I look forward to to them haven't they changed a lot from the massey 20 take care Gerry

always like how you explaining howe to fix enjoyed

Great job , good video 📹 , jess not much of a summer yet, might come, kieran from Laghey donegal town

Great video Adrian tidy tractor

Good to see how that shifter works! My Cork husband couldn't have accomplished that without a LOT of F words and C words. ;)

Good morning in a wet Cavan

Good to see it wasn't a hard fix. 👍 We have a Massey 5611with a Dyna 4 where I work and it will not go into first range at all. I've eliminated all electrical possibilities and replaced the range solenoid and switch on the transmission and now waiting on the dealer to diagnose it. I don't want to say it but this tractor has been a lot of trouble but, it has just had a new engine short block from Agco and the head completely redone with less than 1800 hours. It was burning two quarts of oil in less than 50 hours. Our dealer can't believe the trouble we've had since the tractor was new. I'm not bashing Massey Ferguson but we definitely have the problem child of the family.

Another very enjoyable video Mr adaptable, if I send you a pattern needles and wool would you knit me a pullover in your spare time , good health to you and yours

Good morning

Can u do a total farm vlog

Something you may want to look into is a surge protector .It clamps on your battery and protects your electronics while you are welding. Or you could un hook your batterys .

Adrian your a mighty man from jp.

I like the tee bar on our Massey Ferguson 5712

too funny me dad said fix the light while your in there then you said it made me laugh when you tapped it and started working

Funny, not only humans have different dialects, birds do too. The blackbird in the background actually sings differently than the one in my courtyard, clearly a blackbird, but different verses.

Great video as usual Adrian always love them. What is the make of your cordless soldering iron? Keep up the good work.

Hi Adrian forgot to say on the 20 video that I put my deadman on the back of the seat where there was a flat bit of steel handy job just reach down behind yourself and flick it on

I also wanna be so handy with repairing equipment

Lovely farmers tractor that big enough to do most jobs but nice and handy around the yard. Now you used to a self levelling loader would you go back to a standard one?

My Father, an Irish Farmer in his youth, was the greatest Fixer I have ever known. He could Fix or Repair virtually anything. My Father often said “if you want something taken apart give it to Michael, but if you want it put back together, keep it away from Michael” and he was absolutely correct because I have difficulty putting a Battery in a Clock.

Well done great video. Where did you get the camera for loader well done keep it going

Any chance of a video Adrian of you cursing as a Christmas special 😂

“If you don’t see it it will frustrate the life out of you I didn’t see it and it frustrated the life out of me” 😂😂😂😂😂

👌

Is that a Milwaukee soldering iron I see? 🤔 I thought I was a tool addict 😂

When you’re welding it helps if the tractor is running

👍

Great video when are you painting the loader

Ferguson’s 54 series are just trouble!!!!

4:36 or as an honest Irish man would say "I got a bit thick with it" 🤣

the soldering iron any chance having a look at it and what you think of it

Great informative video Adrian. Adrian where did you purchase the cameras. I need to buy a reversing camera. Jim.

👍👍😁

Should have the tractor running with all lights on when welding on it so as you don’t damage the alternator

There's no stopping you chum..

do you wish you still had the 698 . no fiddling with wires to change gears

Cheering lets go Brandon, Feeding the algorithm

Great video Adrian 👍. When you were welding the camera bracket on the loader is there an issue with the current from the welder damaging the electrics in the tractor?

Hello, I have an error code on our MF 5435. it flashes first 2 times and then 3 times. Do you have any idea what this could mean?

Hi hope you disconnected the battery first

I actually believe your hands work at that speed Adrian and there was no Timelapse used in this video 🤔🤔🤔🤔🤔

🚜🚜🚜🚜😎😎😎😎👍

that would'nt happen to a Case Adrian😉😉

what you need is a good trouble free tractor like a John deere so you could enjoy your work stress free without the frustration.

grab yourself a pair of flush cuts off ebay adrian for cutting excess of cable ties, nothing worse than using side cutters, always leaves the nasty sharp bit sticking out, which tears through skin or when you least expect it

Have u thoght anymore about buying a baler

We have a 5480 on our farm we absolutely love it Never had an issue with the t bar Our clutch is terrible We're swapping her for a 6s soon

😆🇮🇪👍

KUDOS

Where did you get your silo cover

my guess to the window seal probabley a cable went through there going to the beacon or ariel before sorting it properly

My god ya wud break an anvil in a bog

Do you spring block calve ? Love the video

Good morning from wet Meath 🫠🫠