My Pink Floyd guitar gear - custom pedalboard demo 

Thank you for watching it!

Grazie mille, in effetti ci ho dedicato molto tempo... negli anni! :D

The noise you hear is the danelectro vibe... it causes noise with the same speed of the leslie simulation and I'm still trying to figure out how to solve it! Thank you for your comment and for listening!

Try Boss RT-20. Danelectro Vibe mod allow you to lower volume when it is on ... Dano have only this problem add volume when is on ... and rise noise....

md4645 thanks... I'm considering the voodoolab vibe too... do you know it?

one of the best....no problem with fuzz or distortion ... others have this problem ...

Thank you very much! Make sure to see the now one on my channel... I made some modifications to that pedalboard. Thanks again for watching!

I thought the same thing. Awesome video

Is your loop switcher true-bypass? All those Boss buffers...

GibsonLesPaul2273 thanks for the tips... make sure to check the new version of the board here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wEuB83FXz_s.html

Ciao, si il BD è in catena in modo che boosti il big muff. Ora ho aggiunto anche un SD1 che è diventato l'overdrive principale (all'occorrenza boostato dal BD2). Prima di aggiungere l'SD1, usavo il blues driver sia come boost che come overdrive, quindi era settato ad un compromesso tra un buon livello di drive e in modo che facesse da boost per il muff. Ora è settato unicamente come boost, quindi con drive basso e volume alto e lo preferisco così. Gilmour usa il tube driver come boost che sicuramente aggiunge un po' di colore al muff. Secondo me un semplice boost non da' lo stesso effetto... purtroppo non ho mai avuto modo di provare il colorsound... Grazie per aver ascoltato il video!

+Howard Forton you're right but unfortunately it's not lake of treble but it's loss of signal due to the cables and other effects. I'm working on it by adding more buffers on the chain... I'll make a new video when the board is ready! Thanks for watching!

Lucifer Sam Bro you're a good commenter but be careful with the random capitals and the double l's on words that end with "ful" ;)

I agree with all posts thus far.

whynottalklikeapirat *drops mic* lol

Hi, I use only the clean channel of the amp. The settings of the channel are pretty much neutral (knobs on 12h) with a little boost of the bass and middle. The presence is on 7 o'clock (pretty much zero) because the sound become too "screamy". A little bit of reverb and that's it! Thanks for watching!

Thank you :D

The amp is set pretty neutral. Just a little boost on the mid and bass, presence on 4 and bright switch on. Make sure to watch my other video about the updated pedalboard. Thanks for watching!

Hi, if you take a look to the new video of my pedalboard, you'll see that I added other 2 buffers and a Boss Noise Gate in front of the muff. In this way I try to send the cleanest signal possible to the muff!

Fernando Martínez Hi, it's a power supply for alla the pedals... thank you for watching and appreciation!

thanks man!!! have a nice day and keep rocking!!!!

Yes, it's the same settings when used as principal overdrive (ex coming back to life solos). When used to boost the muff, I turn just a little bit down the volume of the guitar and boost the mid frequencies with the spc control of the emg dg20. Thanks for listening!

Thanks! The amp EQ is set to boost the treble and the bass, mid are quite neutral. The presence is at 8 o'clock. Thanks for watching!

+Mike Hull exactly like Floyd

This is the best Floyd pedal video ever

Grazie di essere passato e del commento! Il coolcat vibe ha tre settaggi: profondità, velocità e mix. La profondità varia in base al suono che mi serve: alta per il pulito, bassa per il distorto (altrimenti impasta troppo). Il mix è 50/50

Basically, the BD-2 is set as booster, meaning low drive and high volume. Finding the right tone depends on your amp, guitar, playing style etc... so you have to try different settings in order to find the tone you like... Thanks for watching my video!

thanks bro, im looking for Gilmour sound, and this is the best video, i have the same pedals, except the univibe y use a phaser 90, and i have no delay yet. thank you

I honeslty don't remember, I've now switched to an MXR Univibe that I found has a better tone. I think the coolcat was set on a 50/50 mix, color to 60% and the speed chenges according to songs (slow for songs like "breathe" or "us and them" and fast for "Any color you like"). thanks for watching!

Thanks!

oh trust me, you need it! Now the pedalboard has evolved and I have 3 buffer in it. The difference is clear, more dynamics and more signal and very low noise! I'll make a new video as soon as I can! Thanks for watching!

Jean-claude Thevenin Hi, it's the Danelectro Coolcat Vibe.... thank you!

mikecb17 Thank you to you ? jean-claude. And so long !

Ciao, la pedaliera looper è un prodotto della italiana Midione, il modello è SX-9. Mi pare di averla pagata circa 250 euro ma parliamo di 5 anni fa, non so nemmeno se questo modello sia ancora in produzione. Grazie dei complimenti e per esserti fermato ad ascoltare!

Howard Forton on guitarbackingtracks.com and gilourish.com thanks for watching

Run like hell settings is quite simple: Compressor, flanger and delay. Sometime you can add a little bit of overdrive, but i prefer a dry signal...

+mikecb17 no chorus??

+kyff232 no, in "The wall" and "Pulse" Gilmour only had compressor, flanger and delay...

+Lucas monteiro Hi, I use the SD1 as main overdrive. I like it because it has a very warm sound. I use the Blues Driver as a boost for the Muff and for the SD1... for a good clean sound I use the CS3 and a chorus; sometimes I use only the Blues Driver set as boost to have a really "responsive" clean sound (like Mark Knopfler)...

As i have told you, here in my country is very expensive all this equipament, so i'm think in buy a zoom MS-50g to use, reverb, chorus, delay. flanger. tunner and this thngs, and of course a CS3(i think compressor is better in analog pedal)

mikecb17 or maybe Ms-70cdr, but here is only chorus, delay and reverb so... i think MS-50g is better

MS50 & MS70 are amazing little pedals, I use them as my "ace" to cover for whatever effect I might need. :)

thanks, I'll work on that and thanks for watching too!

Well, my pedalboard is quite basic! You can start with a compressor, an overdrive, a big muff, a chorus and a delay... It depends on what you want to play. For exemple, the Electric Mistress (flanger) is necessary if you want to play The Wall or some songs of The dark side of the moon. The univibe is basic for TDSOTM...

Hi, it's a simple buffer that i bought on the internet and it's hand made by some italian guy... :) Thanks for watching!

It is called "cool cat vibe"... but I replaced it with the mxr univibe. Check out the video of the new pedalboard! Thanks for watching

Hi, because in this way, at the end of a solo, you close the volume pedal and you still have a nice cue of delay that can be heard. Thanks for watching!

The pedals are, in the order: custom made buffer, Boss GE-7 equalizer, Boss CS-3 compressor, Boss BD-2 blues driver, Boss NS-2 noise gate (not in the video), EH big muff, Boss CE-5 chorus, cool cat vide, EH Electric mistress, Boss RPS-10 digital delay. Every pedal has his own loop in the pedalboard. Thank you for watching!

thank you very kind of you. Can you sell your pedalboard?

Sam Taheri no I'm sorry...

Hi, it's the big box on top left with "Boss" written on it. I did replace it with a TCElectronic Nova Delay. Thanks for watching!

Thanks. I have a pedalboard to play Pink Floyd too. my delay is Nova Delay.

mikecb17 Is it a better delay pedal?

Is the black box with the blue "Boss" logo! Take a look at my new video, I changed that delay with a TcElectrinic Novadelay! Thanks for watching!

Hi, you see the same configuration because I only took one picture and then I edited it to show which pedals are on. The midione it's actually a simple looper, it's very usefull to switch between different combination of pedals. The other big pro is that the pedals that are not in use are phisically out of the chain so the signal goes through just the pedals activated. Thanks for watching!

Thank you, just one more observation between the number 6 and the number 7 of the midi one, have two silver-tipped cables, in the picture I could not identify which pedal it is being used for? Or the input of the amplifier? thanks for listening

Hi, those two cable are connected to the volume pedal that is set after the dynamic affects and before the delay. That way, I can cut the volume and leave, for example, a nice cue of delay at the end of the song. Also, in this way if I lower the volume with the volume pedal, the saturation on the overdrives doesn't change... if iò need less distortion I use the volume control on the guitar...

Fantastic, thank you, it helped me a lot

Hi, yes I think so... it's a very flexible set-up so I think you can adapt it to other amps! Thanks for watching

not much head room in vox amps

The danelectro is the "cool cat vibe", a univibe simulator. The delay is the big black Boss box on top left. Anyway, this is my old pedalboard... I did some major updates, you can see them here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wEuB83FXz_s.html Thanks for watching!

hi, the amp is pretty neutral... a little boost on bass and treble and a little bit of reverb.

cool cat vibe

+mikecb17 is a goof Vibe?

It's not bad for its price... but I'm planning to swap it for a Voodoolab Micro Vibe. The cool cat has a significant volume increase when switched on and makes the sound much mor "fat" and "big". My opinion is that is too invasive for my taste! Thanks for watching...

+OfficialMarc1 Hi, the eqalizer is set to cut the lower frequency... it doesen't boost any frequency. The delay is set on a time of about 360 ms... feedback and mix can change based on the song. Now I've canged the RPS-10 delay with a TC Nova Delay... it's more flexible and easy to set with precision than the Boss RPS-10. Thanks for watching!

+mikecb17 also just wondering what the silver box at the bottom right is

+OfficialMarc1 it's a custom made buffer...

+mikecb17 sorry one more question, what setting are on your amp

+OfficialMarc1 Hi, it's pretty much neutral with a little boost on bass, treble and presence. also a little bit of reverb... I only use the clean channel.

It's the RPS10 delay, it's a half rack size effect. I don't use it anymore, I replaced it with a Tc Electronic Novadelay. You can check my video of the new pedalboard... thanks for watching!

It's a delay unit

@@mikecb17 how's it called?

I think it was RPS-10... I'm not using it anymore, I replaced it with a TC Electronic Nova Delay

It's a Boss RPS-10 Digital Pitch Shifter/Delay

+Giuseppe DG no se è tutto calibrato!

hi, basucally I use 50℅ of intensity and the speed changes according to the song... slow for Breathe or Shine on you Crazy diamond and fast for Any colour you like... those are the 3 songs where I use it! thanks for watching

+mikecb17 thx for your answer nice sound

+mikecb17 where can i buy this sx9 i search a Long Time for it but i can t find it

+Alexander Lüttges Hi, it's built by an italian company called Midione but I really don't know if it's still on business! Anyway you can google looper-switcher and you will have plenty of alternative produtcs!

It's "Young lust" from The Wall

+Lucas monteiro Sure! In order, Boss CS3, Boss BD2, EH Big Muff, Boss CE5, Coolcat Vibe, EH Electric Mistress and Boss RPS10. I replaced the RPS10 with the TC Electronic Novadelay, I added a Noise Gate (Boss NS2) before the Big Muff and I adeed a Boss SD1, after the BD2, as primary overdrive. The buffers are custom-made so they have no brand! Thanks for watching!

+mikecb17 it's a awesome, but here in my country to have this is FUCKING EXPENSIVE :X

+Lucas monteiro BOSS peals while good tend to be the cheaper brand. i would know because I'm saving up for a Strymon Big Sky which is about $470