My TOP 3D Printed Organization Systems

Подписаться 122 тыс.

Просмотров 255 тыс.

50% 1

In this video I'm going to share with you 4 of my top organizational systems. This video is brought to you by SOVOL, makers of the Sovol SV06 and SV06 Plus. Check out jle.vi/sovol and use the coupon code NEXTLAYER at checkout to save $10-20 (on orders of $259 or more). They make a great 3D printer that is perfect for beginners, without breaking the bank.
By far, one of the most practical and popular ways to use your 3D printer is creating custom organizational systems to store and organize all your various stuff...
In this video I'm going to pretend like my own office is an absolute disaster and share with you 4 of my top systems for organizing everything in your life.
I'll also go into which system is better for what, the pros and cons of each of them and what to look out for before you hit print.
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎁 EXCLUSIVE CONTENT ON PATREON: / thenextlayer
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
00:50 Modular Drawer Organizer
05:09 Gridfinity
07:42 Honeycomb Storage Wall
11:18 Catch-All Trays
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits | jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
🗳 STL FILES OF FEATURED 3D PRINTING MODELS: 🗳
🗿 Modular Drawer Organizer by wbu42 on Thingiverse: www.thingiverse.com/thing:382...
🗿 Honeycomb Storage Wall by RostaP on Printables: www.printables.com/model/1525...
🗿 Kirschen Chisel Holder for Honeycomb Storage Wall (HSW) by Macman1010 on Printables: www.printables.com/model/4172...
🗿 Honeycomb Wall, ALL DESIGNS!!! By Rob Beast on Printables: www.printables.com/model/3933...
🗿 Cold Shoe Mounts for HoneyComb Wall by Jonathan Levi on Printables: www.printables.com/model/3000...
🗿 Honeycomb Storage Wall Shelf Supports by Jonathan Levi on Printables: www.printables.com/model/3619...
🗿 Catch-All Trays / Desk organizer by HD on Printables: www.printables.com/model/3762...
🔗 OTHER LINKS 🔗
👉 My video showing my Honeycomb Storage Wall: • Is This 3D Printed Too...
👉 Checkout what my video on the best 3D printer for beginners: • A Klipper Prusa Clone....
👉 My Voron Build Part 1 Video: • Voron 2.4: The ULTIMAT... and Part 2: • My Voron 2.4 Build is ...
👉 My previous video on Gridfinity tips: • Gridfinity Tips: 3D Pr...
👉 Gridfinity on Thangs.com: thangs.com/?category=Gridfini...
👉 Subreddit for Honeycomb Wall: / honeycombwall
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: / @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: / thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: kit.co/jlevi
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

Наука

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 141

@DEtchells Год назад

Wow, how fantastically useful (again)! I knew about Gridfinity but not the other 4. The draw dividers and catch-all bins in particular solve storage problems I’ve been needing to address. Mega-thanks!!

@thenextlayer Год назад

Glad it was helpful! Enjoy! :)

@frantisekhriba4235 Год назад

Thanks for the great promotion! You showed the advantages of my trays that we didn't even realize. Thanks again, HD

@jakemeyer8188 Год назад

Pffft. It's awfully presumptuous of you to assume that I'm organized enough to even HAVE drawers...

@shutterbird13 2 месяца назад

🤣🤣

@AKATheAlchemist Год назад

Love this channel. All Of your videos are super helpful. I’ve been looking for Something like the organizer without the bases for our kitchen drawers. Thank you!

@jeffreydheere4737 Год назад

I love storage solutions - modular storage is a great idea calling it 'customizable' but never has been with an off-the-shelf product. With at home 3D printing, it really has crossed the line to fully customizable. Side note: I totally want to see what you came up with for gardening solutions - I've been diving in to hydroponics and see some opportunities for customize pieces that would help with steps in gardening.

@kyliecunnington7711 11 месяцев назад

Oh yes!! I NEED those gardening prints!!

@Admajors Год назад

Great video! To the point, not too long, and organized logically.

@thenextlayer Год назад

Thanks for the feedback I appreciate it

@shutterbird13 2 месяца назад

The Catch All trays are exactly the kind of thing I've been looking for. Thank you!

@maurovianna4702 Год назад

Nice cover on storage solutions! Interested in more for sure. And the gardening prints too. I also frint some of that for indoor.

@pixelrancher Год назад

Yes please to gardening prints! Modular seeding trays (10X20s) ... modular cells that are expandable in height ... dibber for those cells/trays?? Great content. Cheers!

@LordWiseWolf Год назад

This was really helpful and going to look into the honeycomb wall. So many awkward things to hang. I like the idea of stackable, but if I can't see it, I completely forget about it.

@fuloran1 Год назад

My new fav content creator man, such great content.

@JaysonHill Год назад

Love the content. I would like to see your gardening prints.

@Reforge3d 11 месяцев назад

It’s been awesome to watch this channel grow from The original gridfinity stuff. Thank you

@glittalogik Год назад

Yes for more organisation vids please! Gridfinity was my entry to 3D printing but I've been eyeing off that honeycomb wall since day 1. Aaand now I'm frantically scanning my bedroom/office for vertical surfaces I can take over without putting holes in the walls 😅 Current frontrunner is the metal sideplates of my IKEA Fredde desk, which would be super useful for clearing some clutter off the flat surfaces...

@thenextlayer Год назад

LOL nice

@onomatheo Год назад

That is some really good advice! Cheers!

@olafb.2929 Год назад

Thanks for showing these systems. I really need some for clearing the chaos here 😀

@thenextlayer Год назад

EnjoY!

@JakeInfinite Год назад

Appreciate all of your videos. I have a feeling you’ll be at a few hundred thousand subs in a few months or less. Keep up the great content!

@FreedomToPeople Год назад

A Wonderful video. Accurate lucid & very practical for everyday use. Thanks

@thenextlayer Год назад

Glad you think so!

@Marco9K Год назад

Thanks for the great video, and yes, I would like to see gardening prints as well. :)

@kerridutcher3947 Год назад

I am excited for the gardening prints ideas... please make more videos about organizing and gardening prints

@nifty_biscuit Год назад

Yes! Gardening prints!

@Blake27786 Год назад

Sic video🎉, very well done, very helpful, easy to watch 🎉

@artfedderson 11 месяцев назад

Nice video, awesome to see your channel growing and seeing you reinvest in it. Could you link to the cable organizer you showcased, that looks like a super valuable print!

@darkestlynk Год назад

Glad to see you're back. This is your channel - do what you do best.

@thenextlayer Год назад

Thanks!!! And I will!!! More good stuff coming soon.

@TheOneSpam Год назад

Would love to see a video with your gardening prints!

@socks5proxy Год назад

I'm enjoying your content, 100% understand wanting to make things shorter and more direct. I'd like to see more content about how to create useful things for people that aren't CAD wizards, not just download it, but how do I go from idea to print, and be cognizant that I'm a full time worker, dad, and have other hobbies. I have to invest so much time in 3dp, sometimes I miss other things. I spend more time calibrating my printers I don't have time to become a cad expert. Not trying to use this comment as therapy, lol. I'm just trying to find a balance. Great content!

@brunamosquera9782 Год назад

This is fantastic! I rarely comment on videos, but I wanted to say yes for more videos like this!!

@thenextlayer Год назад

Thanks. More coming soon!!!

@racso24 Год назад

I would love to see garden prints❤love the videos

@CPurdiePlays Год назад

I've been finding a majority of my prints lately is for organization haha. My desk at work is chaos and I need to get it together before I lose my mind. Thanks for the great video!

@thenextlayer Год назад

Same, and thanks :)

@MrV8rick Год назад

another great video thanks. I always wondered if you believed me about the honeycombed wall being wrong way round

@Tommyboy292 Год назад

been watching since that first gridfinity video! my first 3D printer is coming soon, and I couldnt be more excited! Also, PLEASE do a gardening 3D prints video

@thenextlayer Год назад

You got it, I'll do it :)

@TS_Mind_Swept 4 месяца назад

Your office may still be disorganized, but it would be even worse without the organizational stuff SoonerLater Definitely would like to print some of these to help with my stuff..

@EC-gy9pv Год назад

Thank you so much for sharing! You are the first one who I learned about Bambu X1 Carbon printer from, which is arriving by the end of this week. And - no!!! - I will not hold you responsible is something goes sour with that printer; it was my own choice to buy. 🤣 After watching a few of your videos, starting from "Dear Prusa", which I am absolutely on the same page with you after fighting with the MK3S hot end for a long time, I'm definitely subscribing. 😍

@johnvodopija1743 Год назад

Top video. Anything related to 3D printing and storage has my immediate attention. I have used Alexander Chapel’s (RU-vidr) grid-based system extensively and it is fantastic. It’s not free though. Cheers 👍😎🇦🇺

@EduardoMartinsJundiai 6 месяцев назад

Hi. Great video! Any settings recommendations for the Catch-All Trays to save time and filament while keep the strength?

@ohad3D Год назад

Great video! As always...

@thenextlayer Год назад

THANKS :)

@sonofbrun6033 Год назад

Your work is so meticulously put together. You add so much to this community. Thank you for your great content.

@thenextlayer Год назад

Wow thank you so much!!

@wa8khp-468 Год назад

FANTASTIC overview of the current designs. I am going to make some Catch All Trays /Desk Organizer by HD. I would like to make a shelf with pullout draws that you show at the 12:40 minute marker. Have you made a YT on this item? Thanks David

@antoniosa 5 месяцев назад

Awesome ❤ did you make some comparison between honeycomb and multiboard ?

@Epsicronics 9 месяцев назад

You have no idea how glad I am that I am not the only dummy who didn't understand how the honeycomb storage wall boards worked lol

@jonathanp906 Год назад

Yes to both!

@thenextlayer Год назад

On it

@shanewalters7821 Год назад

Good video, but not sure if it's a good or bad thing that it's going to further my addiction to printing out organizational stuff! And yes, please do a video on gardening prints!

@thenextlayer Год назад

You and me both!

@Ev0sphere Год назад

After you pointed me to the Honeycomb wall I printed it out and came to the same realisation about which way round it should be. However I hadn't mounted mine yet 😅

@thenextlayer Год назад

Lucky! I have so much work ahead of me

@deanrumpel 4 месяца назад

Have you looked at the Multiboard system yet? I'm using Gridfinity for the flat spots, and thinking of going Multiboard for the walls.

@sez11a Год назад

Hey, thanks for the shout out! Spool storage on the HSW FTW! :-)

@thenextlayer Год назад

Haha yeah!!

@sez11a Год назад

@@thenextlayer Seriously, though, I've had spools up there for about a month, and it hasn't been a problem. My HSW is all one piece: printed on a Tronxy VEHO 600 with a .6 nozzle, I used the OpenSCAD version to generate a gigantic 550x550 HSW.

@MoritzWeller 5 месяцев назад

Great video! What are the advantages and disadvantages of the honeycomb system compared to the IKEA skadis system?

@dennisgu2506 Год назад

Great videos

@thenextlayer Год назад

THANK YOU

@jackwood6214 Год назад

I definitely need to organize my entire home lol

@John-NeverStopLearning Год назад

Great video! One question, when are you going to print a collapsable office chair? Will that be another great 👍 video?

@JonathanLuker Год назад

Any chair is collapsible if you try hard enough, and *every* 3D print is if you *don't* 😉

@clubskitzhardstyle Год назад

so print out the walls and stuff on the modular drawer and make a hot gluebase or hot glue fabric or something under them

@ansiaaa 2 месяца назад

gardening prints pls!

@nightcorelore5648 Год назад

1kg filament rolls should hold pretty safe, as long as the honeycomb wall is facing the right way… plus there are supports for those bigger shelves

@exaltvideo Год назад

How do you take one of the existing rectangular gridfinity pieces and make the front edge shorter than the back edge so that the top plain is at an angle toward the user?

@ripcordjack 11 месяцев назад

I love these prints but damn to they take long for in some cases such small parts :D

@thenextlayer 11 месяцев назад

Yeah, true

@mechaform 8 месяцев назад

This 3D stuff is like smoking crack. Thanks for the useful organising info!

@thenextlayer 8 месяцев назад

Glad you enjoyed it!

@kpodbot 4 месяца назад

I have mounted my honeycomb wall the wrong way round looking at this video but I have not progresses as far as in the video so should be oasy to remove and turn the base over I hope. thanks for the video :O)

@JoshMurrah Год назад

I gave the honeycomb wall system a shot, but it has a really horrible bridge for the inserts - how did you overcome this??

@TheMLightning 3 месяца назад

RostaP gives a very detailed breakdown of the Honeycomb usage on his printables page. Just fyi.

@thenextlayer 3 месяца назад

He does now. This video is very old.

@AnomieDomine 7 месяцев назад

Sounds like these all need remixed to add gridfinity support

@SkyHighCharley Год назад

You know, just when I was "starting" to recover from my gridfinity addiction(ok so I ran out of filament), I see honeycomb now...... need to place an order...

@thenextlayer Год назад

HEEEEREEE WE GO

@frostbyte11 Год назад

Any systems for a pantry with several sizes of cans?

@ThirdDynamic Год назад

Have you thought about adding a mod to your gridfinity bins to allow them to be on your honeycomb wall?

@thenextlayer Год назад

I have gridfinity on my honeycomb wall?

@ThirdDynamic Год назад

@@thenextlayer Oh yeah, the one with magnets.....smh 🤣. Welcome to my week of amazing forgetfulness.

@TheFeist77 Год назад

I am waiting on my 06 plus

@thenextlayer Год назад

Nice, I think you'll like it :)

@ulaB Год назад

So how would you convince a Skadis user to switch over toHCW? :-)

@ChrisHolcomb21 6 месяцев назад

Have you checked out Multiboard? Since you use the HWS I would be interested on your opinion on it. Was about to start printing out a lot of HWS tiles until I saw the Multiboard which includes pegboard holes and seems to be a little stronger. Could you do a comparison video of these two systems?

@JcMinyarro 5 месяцев назад

Would be great to have this comparison video. I am about to print my own "wall organizer" and I think I will go with Multiboard because its community and the "adapters" they are designing for other systems like HWS

@bmorr 9 месяцев назад

Did you 3D print the supports for your monitor/laptop stand that you moved around 12:40?

@thenextlayer 9 месяцев назад

Nah

@shanewalters7821 Год назад

Does anyone have info one how much weight (generally) the honeycomb wall can handle? Not as a whole but maybe per item being hung.

@thenextlayer Год назад

Depends which hook, materials, etc...

@dragonshoarddesign3094 Год назад

STL files for resin?

@TFitz 11 месяцев назад

Did you have a $200 camera lense sitting on a small shelf with nothing to stop it from rolling off?

@markfleming7705 Год назад

Maybe a silly question, at roughly 2.45 in, what software are you using to show a preview of the stl files, I'm still relatively new to 3d printing and am having to click the stl file to view the part in a slicer, this would save me a lot of time when trying to find the piece I want to print 😊

@thenextlayer Год назад

That's Finder on my Mac, it's built in

@gregschouten 9 месяцев назад

I’ve very new to the printing game, only a few days old. I have an Ender 3 v2 Neo and I’m not sure how to print to hexagon walls on it. It says it can’t slice it cuz it won’t fit. I’m sure it’s just a dumb rookie mistake but I’d love to learn how to make adjustments and figure it out if anyone has any advice? 🤓

@stephencarter2041 4 месяца назад

this is crazy

@Leahd_279 11 месяцев назад

For the honeycomb wall mount - which way am I supposed to print and which way to attach to the wall. It's the notched side that goes against the wall?

@thenextlayer 11 месяцев назад

Fat side down when printing, thin side against the wall

@Leahd_279 11 месяцев назад

@@thenextlayer thank you, once printed that makes much more sense!!

@ptman3 Год назад

I can't keep from staring at the crooked "Socket Wrench" label of your toolbox tho...:)

@stephenfriedenthal8312 5 месяцев назад

I tried the drawer organizer and burned a ton of filament for a system that is just too damned confusing and too finicky. Gridfinity just works. The drawer organizer has connector pieces and 'divider' pieces and it's a royal PITA to figure out what you want to do between them. I appreciate the tons of work that went into it... but this could have been much simpler and easier.

@Somebody2687 3 месяца назад

I want to print the drawer organizer but it's too much for me to want to sort through 😂

@sierraecho884 4 месяца назад

Look up how "shadow foam" does it. The point of organization is not only to place small bits in containers but also to see what´s there and what´s missing. Shadow walls are a part of 5S and for mechanics for example it is only important to store stuff but also to make sure everything is back on it´s place and to see right away what´s missing. By stacking 1000 boxes all over the place you don´t get the same organization. I see this frequently with those rainbow colored puke 3D prints, there is no color scheme and not shadow wall it´s still chaos but this time with 1000 boxes instead of 1000 parts. Honestly I don´t see the gritfinity system as a mobile system, I would rather use Kaizen foam instead. It´s way neater and more organized. Now you can do the same with the gridfinity system but I have not really seen somebody do that. 3D peinting nerds tend to be disorganized most times with 785 colored filament for whichever reason and so on. All this is a storage nightmare by itself.

@coolepicrob5305 Год назад

hello

@NicksStuff 7 месяцев назад

Shit, now I can't choose which one to use for my drawers

@ahmetcemturan Год назад

Veeeerrrryy naaayysss...

@JonathanLuker Год назад

Hmmm.... X1C, Honeycomb Wall, Magnets... A place for all the tools, hot ends, maybe a build plate or two... If only there was someone that had one and could do an awesome video before I try it. Know anyone who needs to print out a HCW and has an X1 and likes making videos @thenextlayer ? 😎😉

@lolslim690 Год назад

I am actually using "fake gridfinity" I call it fake because I modified the openscad file to print bigger bins, 50.6mm, instead of 42.

@RusakovLA Год назад

Hi! Do you know a place to recycle PETG in Israel? I have almost a kilo of prototypes, failed prints, etc.

@thenextlayer Год назад

I'm working on a little something something... stay tuned. Keep it.

@8bitparty-pl Год назад

👍🏻

@Scyfe74 Год назад

Hello @The Next Layer I love your videos and watching since I have found them first time. It looks like links in description dont work especially under.🛒 RECOMMENDED GEAR: 🛒 Ccould you please take a look on them??

@thenextlayer Год назад

Let me check

@Scyfe74 Год назад

@@thenextlayer they working now tk

@ummbeer1 Год назад

I am a disorganized guy trying to get organized, any help is appreciated.

@HauntedSheppard Год назад

Gardneing prints let's go

@thenextlayer Год назад

On it!

@joshsmyth130 Год назад

Gardening would be cool, it's not something I've seen so much on RU-vid

@jamesshakour9112 Год назад

Is the Discord server shut down?

@thenextlayer Год назад

No…? Https://jle.vi/TNL-discord should work

@jamesshakour9112 Год назад

@@thenextlayer I kept getting a 404. Works now, sorry for the scare! Love your vids!

@ameliabuns4058 4 месяца назад

Confession: I don't get the gridfinity hype and it uses so so many magnets

@thenextlayer 4 месяца назад

You don’t need the magnets

@ameliabuns4058 4 месяца назад

@@thenextlayer ooh I guess that’s true! Maybe I should print a few and see. Filament tho…

@saltwaterrook4638 Год назад

250mm/s bed slinger? No. I'm calling BS on that.

@BlackMapleMFG 2 месяца назад

Multi board wins

@demidermak713 10 дней назад

Not open…

@jakeengland1430 Год назад

I love you man and i love your content but in your attempt to ennounciate your words more clearly you say almost every other sylable in a different tone and volume from the last and makes its extremely difficult to listen to you sometimes. I hope you don't take this as criticism for criticism sake I'd just prefer if you just talked more plainly and less like you're trying to make a speech at a convention.

@thenextlayer Год назад

Thanks for the feedback, part of the problem is teleprompter pacing, so I slow down till it catches up, I'll work on fixing it.

@JonathanLuker Год назад

@@thenextlayer I wouldn't worry too much... the commenter may have better speakers or headphones than the rest of us - this ADHD brain noticed, and just thought you were speaking for clarity - tone and volume are texture.

@kerrygallowaynor Год назад

@@thenextlayer I would concur that I could stand to hear things a hair less “over enunciated” - but your videos are truly fantastic and I will watch them in whatever form or style you deliver them :D