15 Useful 3D Prints: Go From Beginner to Advanced!

Подписаться 120 тыс.

Просмотров 444 тыс.

50% 1

In this video, I'll share 15 USEFUL 3D prints that will test your skills (and your printer), and help you go from a beginner to an advanced 3D Printer. Brought to you by PCBWay, your one-stop-shop for PCB prototypes and assemblies. Check them out at jle.vi/pcbway
In this video, I’m going to share 25 functional, practical, and USEFUL 3D prints that will not only put your 3D printer to the test, but will each challenge you to learn a new and important skill that every 3D printing enthusiast has to learn.
Instead of wasting kilos of filament on useless junk, I’ve chosen a series of prints that test you and your printer on each of the different skills involved in 3D printing, from bed adhesion and retraction to advanced slicer settings and flexible materials… all while leaving you with a practical part you can actually use when you’re done.
It’s a veritable TRIATHLON of 3D printing. Can you print them all? Will you?
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎁 EXCLUSIVE CONTENT ON PATREON: / thenextlayer
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
01:04 Tupperware Lid Organizer
🗿 Tupperware Lid Holders by Lewis2e on Printables: www.printables.com/model/1755...
03:11 Drinking Glass Labels
🗿
04:52 Threaded Containers
🗿 Threaded Containers by Jonathan Levi on Printables: www.printables.com/model/3658...
05:49 Cable Mount Organizers
🗿 Cable Organizer by LordTalon34 on Printables: www.printables.com/model/2600...
06:32 Cable Winders
🗿 Charger Cable Organizer by DFV Tech on Printables: www.printables.com/model/2898...
08:34 Tablet Stand
🗿 Tablet and Notebook Stand by Virus4711 on Printables: www.printables.com/model/1614...
10:19 Drill Dust Collector
🗿 Wall Drilling Waste Cup by Zbigniew Trzepizur on Printables: www.printables.com/model/2591...
11:30 Broom Holder
🗿 Broom Holder by fns720 on Printables: www.printables.com/model/6241...
12:09 Plant Labels
🗿 Stylish Plant Labels / Tags by fortinmike on Printables: www.printables.com/model/6174...
13:06 Dragon Scales Planter
🗿 Dragon Scales Pot and Planter by SASSy Design on Printables: www.printables.com/model/3538...
14:19 3D Printed Carabiners
🗿 Multi-USe Carabiner by Parker Boyd on Printables: www.printables.com/model/3284...
15:10 Better Shoelaces
🗿 Better Shoelaces by Johnny B Mac on Printables: www.printables.com/model/3087...
15:58 Dual Sorting Tray
🗿 Dual Multi Sort-A Dual Sided Sorting Tray by Malcolm on Printables by: www.printables.com/model/2690...
16:31 Parametric Cable Organizer
🗿 Parametric Cable Organizer by djedje_zr7 on Printables by: www.printables.com/model/1233...
17:16 The Laptop Saver
🗿 The Laptop Saver (a sub-desk level drink holder) by Martin_au on Printables: www.printables.com/model/2671...
17:56 Conclusion
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits | jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
🔗 OTHER LINKS 🔗
👉 My previous on the list of tools you need to level up your 3D printing workflow: • 3D Printing Tools You ...
👉 My previous video on 50+ useful 3D prints: • 50+ Useful 3D Prints Y...
👉 My previous video on 3D printed tools: • 28(ish) 3D Printed Too...
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: / @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: / thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: kit.co/jlevi
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

Наука

Опубликовано:

12 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 202

@thenextlayer Год назад

THANK YOU for watching, sharing, liking, and subscribing. PLEASE let me know if you liked this video and would like to see more like it!

@maxmustermann194 Год назад

Thanks so much for all your effort and ideas. If I may critisize a single minor thing: Your intonation going up at the end of a sentence is a bit irritating to the ear, e.g. 7:50 onwards. If you work on this, it will make watching the videos even more enjoayble.

@alexandrevaliquette3883 5 месяцев назад

The video production is very nice, but content is not my preferred one to be honest. Theses are useful prints, I agree, but... They are not torture test. The objective of torture test is to find as fast as possible what is the problem with your printer. Torture test use less plastic, so you can fix your printer before you risk wasting a larger print.

@chainmailleguy Год назад

I would also like to see a video about calibration. As a relatively new user to the 3d printing world it gets a little overwhelming to understand everything. Maybe a series going from basic techniques to advanced

@thenextlayer Год назад

that's a good one. until i get to it though, check out the Ellis Print Tuning Guide

@chainmailleguy Год назад

@@thenextlayer thanks! I will check it out. I look forward to seeing your guide too!

@Chris0612 Год назад

There are better places for this, look at the print quality in the video. Non of the showed prints came from a proper dialed in printer.

@Linkophere 6 месяцев назад

The video is great for guiding you to problems without helping with any of said new found problems. equivalent of a teacher throwing the textbook at you and telling you to read the chapter.

@Leedledlee Месяц назад

Even worse. Its trading small, low cost test parts for larger higher cost test parts. So not only do you still not know why the stringing happens, you get to waste 200g of filament instead of 10g

@GeorgeWells00 Год назад

What a really great set of prints and wonderfully clear explanations of why!

@Sirron2007 Год назад

Great list of functional prints to learn from. Just want to throw in a couple of my favorite types, bookmarks for testing first layers and bag clips for print in place.

@LikeAboss168 5 месяцев назад

Use the tips of the calipers for a thinner surface you’ll get a better reading on the thickness of a curve

@dwatts51187 Год назад

This was an awesome video. Definitely a bunch of things I’m going to have to print now. Would love to see a video demonstrating how to dial some of these settings in. Maybe a troubleshooting advice video.

@baddan Год назад

I suggest showing credits to the creators of the models when showing the makes

@summer_snow4695 Год назад

They are linked in the description, but yes, showing the credits to creator in the video would most likely be the better option

@eliazararevalo6924 11 месяцев назад

I never would have heard of the creators without this video. Free marketing for the creators plus direct linked credit? Can’t ask for more.

@_KorruptioN_ 11 месяцев назад

100% agree. I have a bunch of models out that I see video creators using, I do wish my name was featured in the video since a majority of people don't read the full description, especially if they are watching on their phone

@LoganLovell 10 месяцев назад

Absolutely agreed. People don't always appreciate how much work goes into creating a model. When someone shares their model for free, the least people can do is give them proper credit.

@patrickguyum 7 месяцев назад

@@eliazararevalo6924Not at all comparable to the direct viewership and benefit reaped by the video itself.

@Deathbunnydude Год назад

Great video! Loved the graphics and and text. Really gives good info on what each print is showcasing! Keep it up!

@thenextlayer Год назад

THANK YOU! These comments keep us going :)

@ntombizodwavundla168 Год назад

You had me at item number 1 😂. I am sold 😊. Thank you.

@treyduval5399 Месяц назад

Excellent content 😊

@leo3times Год назад

Nice video & print ideas. New to 3DP and am struggling a bit with settings. Been using Cura 5.2 but also trying Prussia 2.0 (I think). I'm getting a bit frustrated with the settings on mini's but still learning. I made some 50 cent piece sized mini's that have words on it. Letters run together 😊. So I appreciate the ideas for checking the tolerances. 👍🏻

@thenextlayer Год назад

Try out PrusaSlicer 2.5, it's quite good.

@leo3times Год назад

@@thenextlayer I just looked at it and it is 2.5 so it is the latest, thx. 👍🏻

@ericsts 11 месяцев назад

Great video !!!! I am trying to 'teach' my printer to make some bridges without support and then print the Tup lid organizer!!

@Lyoishi Год назад

I have had a printer a few months and I had never imagined printing shoe laces. Will have to give it a try Would definitely like to see a detailed calibration video, a lot of popular ones are quite a few years old. Since you have an X1 I am sure you have seen the issues people have even with a "plug and print" printer, especially with pressure advance.

@janpoepke9002 Год назад

Thanks for the great Tipps and Ideas... really useful channel!

@thenextlayer Год назад

Wow, thank you so much! Really appreciate it :)

@printingthepokedex2636 Год назад

I would love to see an in depth "how to calibrate your printer" video. Just moved to klipper and have had my previous settings become obsolete

@thenextlayer Год назад

Yeah. That's a HUGE topic, that would take HOURS. For now, check out the Ellis tuning guide

@racketman2u 9 месяцев назад

I liked that laces idea, time to discover TPU printing!

@thenextlayer 9 месяцев назад

Have fun!

@ericjilot484 Год назад

I'd love to see a video on the wall storage system you are using.

@only1muppet Год назад

In regards to your plants and gardening, has anyone suggested you get a soil test kit? It’ll give you insight into what nutrients your soil might be lacking and help your plants thrive.

@kylehund3556 3 месяца назад

Was gonna subscribe initially but by the 3rd or 4th time he asked I was like okay man, clearly this is for plugging you and not the 3d printers

@thenextlayer 3 месяца назад

I’ve gotten much better at that in more recent videos

@Cara.314 Месяц назад

Hah. Came to find this comment. It put this channel on my shit list.

@natmickan 11 месяцев назад

As someone who also does a lot of drilling around the house, I’ll let you in on a cheaper, more effective & more accessible trick for catching the dust: try a post-it instead. You stick it to the wall just below where you’re drilling & fold the bottom half up so it’s like a paper shelf to catch the dust. It catches all of the dust (because it’s stuck completely against the wall), & if you don’t have a post-it, you can use tape & paper to achieve the same effect. It was a game changer for me :)

@NickoBaggins 9 месяцев назад

I have always just held a damp paper towel underneath while drilling and wiped up anything that stuck to the wall. May have to try the sticky note to see which is better.

@spyrule 5 месяцев назад

You can also do this with an envelope and a piece of tape.

@johnparker2636 2 месяца назад

Or use the bottom half of an empty milk carton -cheap, light and readily available.

@NP907AK Год назад

I love how we have just about the same printing setup. Both using 1X Carbon, same filament dryer and I can see that mirror finish on the Tupperware top holder meaning you using a Wham Bam plate.

@thenextlayer Год назад

Yeah!! You got me on all 3! Now, time for you to build a voron 2.4 350mm…? I have some spare printed parts in orange and black if you wanna be twinsies

@maximel7629 10 месяцев назад

I tried printing the cable winder - the lid. It sticks well to the print bed, but about 60% through, when it's printing the middle bits, it does not stick to the print anymore and then just starts printing in mid air. Any ideas why this may be happening? Thanks!

@b3owu1f Год назад

With Prusa 2.6 Alpha 2.. you can just add text on to 3d models now.. so wondering if the 2nd print idea with "open scad" is really needed anymore?

@0j1xx 6 месяцев назад

Great Video, But say what is the grid on your wall called and where can i get the files?

@davidwilliams1060 Год назад

Pushing me out of my comfort zone in a couple different ways, good. I’ll try the screw top container first.

@thenextlayer Год назад

Nice. Glad! The response to the video wasn’t wow so I’m happy you enjoyed it

@lindonwatson5402 Год назад

more like this please

@daxmcanear Год назад

What a great idea for a video.

@thenextlayer Год назад

Glad you think so! It hasn’t performed that well surprisingly but hopefully more people will discover it

@theputnamto3468 Год назад

how did you get your bottom so smooth and shiny on the tupperware thing?

@ashokmoghe8035 Год назад

Great video. Looking forward to the video on OpenSCAD. In particular or as a separate video can you show how to customize a print by putting text on the print such as someone's name. Thanks.

@thenextlayer Год назад

It's out now! I decided to do it as a Short, b/c it wouldn't take much time to explain, not worht a 15 min video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WFRZS9evI_c.html

@ashokmoghe8035 Год назад

@@thenextlayer thanks. Watched and liked your short video. 😀 I will give it a shot.

@VictorCaoCA 6 месяцев назад

I really appreciate how you explain how any challenges that you experience on a print is an opportunity to learn how to make your printer/slicer settings better.

@thenextlayer 5 месяцев назад

Thanks! Appreciate the comment

@silenttraveler7192 Год назад

Great Video ❤ BTW Are you having a bad hair day, LOL Luv the Beanie 😂

@tactikool4740 Год назад

I think im gonna try the tablet tray. I do have a question as to what slicer you are using for your Voron? I have a switchwire and having a hell of a time finding a profile for it.

@thenextlayer Год назад

I use PrusaSlicer, but I might move to Bambu... it's crashing when I slice for Voron though.

@michaelmeuther213 9 месяцев назад

Hallo, witch Software is ist, you talked about at 3:48 in Thais Video? Thank you

@jmdev31584 6 месяцев назад

Great video

@thenextlayer 5 месяцев назад

Thanks for the visit

@JSADD3D Год назад

Pretty Nice~😍

@spyrule 5 месяцев назад

I'm actually going to print that tablet stand, and probably a few of those parametric cable locks.

@thenextlayer 5 месяцев назад

Epic, enjoy! Watch some more videos, I have a LOT of recommended prints for you to check out

@martinmarkmarkovics7754 Год назад

I wish you the best in making youtube content and to help you there are some things i think worth mentioning: - If you really want to make the viewer to learn how to print better then, teach them! Pick only 3 models, which you think the most challenging and tell what to expect, and how to prevent from failure. You are just mentioning what to expect, but THE beginner, who watches this video will just scrach his head where to start. (BTW, You did great at 14:35 and 16:50!) - I wouldn't recommend such a big and high print FOR setting in the retraction. It's too much wasted material on the bottom before it starts showing the affection of the retract. Time and material could be spend more efficently. - Try to show the latest, and mostly the easiest ways to edit/make models. The Prusa slicer 2.6 came out 2 weeks ago with the alpha version, that makes you able to create text on your model. I think TPU could be later in the video coz it's more advanced, then a "second model for learn to print". - After a finished build you need to calibrate your printer first, and then you can print stuff with it... Don't be sketchy, when you made yourself to build a Voron! The whole point is to be professional, with fast and accurate printing. Calibration is foundation! - 11:00. Instead of explaining that why this model wasn't correctly made for 3D printing, you could explain how to repair the modell to make it fit. For example I would cut down the bottom 1-2 millimeters in the slicer and if it's needed, then I would bring in a box and shape it so it makes the bottom on the same thickness as it was before. - 12:00 If you already know the screws are gonna separate the layers, don't use woodscrews. They chamfered on the bottom so they will separate the layers, anygood the adhesion is... Use allen screws and washers instead. It's not just about the printing itself, but how you handle the print after the fact too.. - Don't hit your previous sentense. Vase mode has no infill as the hyperlapse shows, so you don't need, actually you can't change the infill by any means.

@thenextlayer Год назад

Great feedback thank you so much!

@djispro4272 Год назад

I have printed the cable winder many times before - I should print more, that is :) But that Tupperware organizer looks like a challenge to my ender 3 clone

@thenextlayer Год назад

Dooo it!

@djispro4272 Год назад

@@thenextlayer I finally got some TPU. Where can I find those glass labels?

@Hanzi2u Год назад

i must be a novice since all these prints is somewhat easy to throw at my printer it is pretty much dialed great in thanks for the vid anyways it's a great video for newcomers and people that hasen't tuned in their printer fully yet

@TS_Mind_Swept 5 месяцев назад

Don't know about sorting, but a part tray or two would probably be beneficial to have 🤔

@docburn6189 6 месяцев назад

That was an interesting "how to punish your printer" video

@magnusskipton7067 Год назад

14:28 these (with pla plus and my settings) will support 100lbs, yes really, i hung one up and started to pull on it with a old fish scale, most i could pull was like 60 lbs, so i started to hang from it, had it at 100 before i shifted my weight again go put more on it and it went. In other news getting whacked by a 6lb fish scale at high speed in the hands and head hurts really bad. Cant wait to repeat the test with cf nylon in the future!

@sophisticateddelinquency 5 месяцев назад

Great video. Only thing that wouldve made it better are the resources to learn the skills needed for each one.

@thenextlayer 5 месяцев назад

Good call!

@sophisticateddelinquency 5 месяцев назад

@@thenextlayer- Could always be added in the video info?

@cshorey Год назад

I enjoyed this video and appreciated the assessment of what aspects it would test. I think this could move into specific videos covering each of these items. I am news and noticed in the comments, we don’t know how to adjust our cooling or retraction. I haven’t found a guide or video set to really help me both understand what and why, but put me on a path to really dial it in. I understand there are far too many items to do in a single video, but maybe follow up ones which take one of these models and then explaining retraction and how to adjust it, then do another on cooling. Etc… Thanks again for the videos. I have been enjoying them.

@thenextlayer Год назад

Great idea I’ll think on how i could do it. And thank you for the kind words they are really appreciated

@advisorgee Год назад

@@thenextlayer I agree with Chris, I stopped watching about 2 models in as there is little point in me trying to print these if I have no clue how to fix the problems that show up

@thenextlayer Год назад

@@advisorgee Great feedback. I wonder if I should do a video that's like "common problems that make your prints suck" and try to condense years of my learnings into 1 video?

@advisorgee Год назад

@@thenextlayer That is a great title, and if you can make it into one it would be great.

@thesnazzmaster Год назад

Bro i put my printer to the test and i failed

@glowpipe 9 месяцев назад

Just ordered my first 3d printer and now i got cold feet. So many things talked about in this video that can go wrong while printing, a bit overwhelming. But i guess i should just get the printer, start printing and deal with issues as i go

@carlos.galhano 7 месяцев назад

Mais uma vez um vídeo interessante, mas gostaria de um tutorial de como se fazem esses objetos interessantes.😢

@keebs7544 Год назад

What is the hex grid pattern holding your tools? Is it 3d printed?

@MatrixRay19 Год назад

It is, look up HoneyComb wall on Printables

@thenextlayer Год назад

Of course :) It's the Honeycomb Storage Wall by RostaP, I did a short about it.

@michaelmendoza1818 Год назад

I want that peg board thing you got there. Did you print it?

@thenextlayer Год назад

Yes check my recent video on organization systems. I also have a full video about this coming in two weeks

@Factsfun-kg4xc 5 месяцев назад

3d printed a mouse shell for my logitech g305. Turned out perfect but Tolerances need to be spot on. if not the pcb, scrollwhelle and other hardware will not fit!

@XtianApi 3 месяца назад

Great video topic. Love noob topics

@josefdahari Год назад

Hey my brother. Glad I found your channel. Not to mention you from the motherland baby! ❤️❤️ Toda ach sheli.

@thenextlayer Год назад

Big up!

@till2911 Год назад

Cool video

@thenextlayer Год назад

THX!

@DoktorSkill Год назад

I have an issue where i get holes in my outer surface (walls). They are not completely random, they appear als in the same Spot and they are not z-sean. My Z seam is already aligned. I tried drying my filament in a filamend dryer from sunlu but its not helping. At first the filament printed well but now… i even tried standard settings from cura.

@thenextlayer Год назад

Upload some pics on our discord we will help you out. It’s probably pressure advance not being well calibrated. Https://jle.vi/tnldiscord

@user-ot4wp4mz6l 5 месяцев назад

OpenSCAD is actually my main 3D modelling software, but I am planning to move to Fusion 360.

@tleveque 6 месяцев назад

Nice models..... but what I want is what is in the background! Can't keep my eyes out of it. This wall mount system!! Where can I get the models?? Anyone know?

@thenextlayer 6 месяцев назад

I did a whole video about it. It’s called honeycomb storage wall! Check my past videos

@marknthetrails7627 Год назад

Thanks 👍✌🖖🥃, good job, peace out, live long and prosper having a drink...

@SSDragon19 Год назад

what tpu shore are you using?

@ToddRafferty Год назад

I know you divorced Prusa, but Prusaslicer 2.6a3 has a text tool in it now, you don't need open scad.

@thenextlayer Год назад

I still use and love PrusaSlicer (lol on the divorce though), but I don't get along with the text tool that well, plus, some openscad models will let you actually like, modify the model itself, not just emboss or deboss text on it. Get what I mean?

@jackcoats4146 Год назад

You showed the 3d printed dog, where did you find that, please!

@nickhildenbrandt4529 Год назад

What is with the weird blurred box in the lower center of the screen in part of your video? It is very distracting.

@woodwaker1 Год назад

I noticed the same thing. Curious why it is there

@thenextlayer Год назад

I was an idiot and I left on the "recording controls" on my screenrecording software, so we blurred it out. Maybe it would've been better to not blur it.

@woodwaker1 Год назад

@@thenextlayer thanks for the honest answer!

@theoneohmresistor Год назад

didnt see it until you pointed it put haha

@Amanda-qz1re 6 месяцев назад

Plus I’ve gotta at least get a 3-1. Three function/useful. To one random fun one

@mayurwagh7399 Год назад

Can you please share the link for the pegboard behind you TIA!

@thenextlayer Год назад

I did a whole video about it check it out

@mayurwagh7399 Год назад

@@thenextlayer Hey sorry I am not able to find it in the list… can you plz mention the name of vdo… thanks!

@chlero_eyes 8 месяцев назад

I want see a video about settings

@joanaltera574 8 месяцев назад

Hi there, what about the honeycomb wall with all the holders

@thenextlayer 8 месяцев назад

I did a full video about it check it out!

@limehuzki 9 месяцев назад

4:00 I just use a software to type text then use shapr 3d to wrap the text onto a model^^

@tommyguuun 8 месяцев назад

What‘s the brand of the orange filament?

@thenextlayer 8 месяцев назад

On my wall it’s peusament

@fredrikharaldsson Год назад

Thank you! I've been searching for and thinking about something like the Cable Winders to solve the mess of dozens of extra-cables I have.

@thenextlayer Год назад

Happy to help, enjoy, and make sure you're subbed :) More coming.

@tivednagol9127 7 месяцев назад

14:02 what does "dial in" mean in this context?

@1Luisinga Год назад

Love the videos! I am getting into 3D printing with my 11 year old son but need guidance. Would you be interested in online teaching? I am about to buy the Bambu Lab X1 carbon printer because of your great other videos I have seen. Please help me!!!

@thenextlayer Год назад

Join our discord, we'll be happy to help you :) Also, if you wish to support the channel, please use our link to order your printer! jle.vi/bambulab

@meteaydn1481 6 месяцев назад

What is the name of this art program? ım am cura to use

@caperdoodle Год назад

Ugh. Now I'm gonna have to make more 😏

@robhancock2240 5 месяцев назад

Well that’s put every one off printing any of those lol 😂

@brandontroyer1067 Год назад

I have a couple questions 1st is what printer would you recommend for a beginner and 2nd the honey comb wall do they go together like a puzzle so you can make it bigger

@thenextlayer Год назад

If budget allows, Bambu, otherwise sv06 jle.vi/Sovol And yep puzzle

@johanjotun1647 Год назад

if i ever print a benchie, it will just be a trophy, but i think why not just print differentials, that would be the ultimate tourcher test.

@YouTubeStat Год назад

Amen

@southernson709 Год назад

Thanks for thee videos. It will be good to be more precise and concise … les small talk

@thenextlayer 11 месяцев назад

Thanks for the feedback!

@davidfarris1332 Год назад

This is epic considering I just got my first 3D printer 2 days ago. It's already down I clogged it somehow 🤣

@thenextlayer Год назад

Congrats, you'll enjoy the hobby, and there's so much to learn. You'll get better. Don't give up.

@chrisosman6890 Месяц назад

Cable Mount Organizer link doesnt work.

@praca1736 Месяц назад

not work Multi-USe Carabiner by Parker Boyd on Printables:

@Nutririana Год назад

I watch the first part and think... well that's a lot of material for a test that most likely will fail

@filipnovak7884 Год назад

I think that you forgot to talk about the hexagon wall in the background..;)

@thenextlayer Год назад

True!

@singhhammoud1641 9 месяцев назад

Like I normally don't comment on anything, but the soldering of the guy at around 7:40 are just not from this world. That he is soldering a rather modern Motherboard is already a stunning task to behold, but he is also so quick and precise with soldering, that I'm just not able to see him put any solder anywhere. I also wish to become a magician with that extraordinary level of skill.

@mikebond6328 8 месяцев назад

He was tinning his tip while listening and singing along to music.

@Cara.314 Месяц назад

Almost as if its just shitty stock footage.

@Julianvolden Год назад

instead of openscad, show how you can modify and add text in prusaslicer :)

@thenextlayer Год назад

Not the same though because in openscad you can do like, lettering. Changing the actual model for example a sign. Not just emboss or Denise

@girenloland Год назад

Don't print thing under stress or pressure with PLA. It will yield or bend over time. There is lots of other plastic than PLA that can be used

@robertzarfas9556 Год назад

I applied glue stick to the subscribe button and now my phone is all sticky 😩 But preheating the like button went well 👍

@thenextlayer Год назад

Yessss someone acknowledged my joke! Thank you!

@bylifeorbydeath 6 месяцев назад

I get your overall point, but you are asking us to use a lot of filament to dial in a printer. Way to many people have crap ender printers .

@macbaar6073 Год назад

That is stuff for advanced 3d users not for beginners like me…

@thenextlayer Год назад

Give it a try, challenge yourself, that's how you learn :)

@Etrehumain123 8 месяцев назад

Yeah no. If I have stringing problems, I dont want to discover that on a large print

@allterrainvehicle9139 Месяц назад

0:19

@bubblebaath7840 Год назад

I liked the “queue food safe army” bit. Ppl say that fdm prints aren’t food safe but it really depends on how you wash them. Most washing machines will get in the gaps just fine and if you still have a problem with that, a UV steriliser will take care of all your issues. Ppl gon say “that’s too much effort just to use a printed part” and I fully agree, but my point is that you are wrong and printed utensils *can be* perfectly food safe.

@guineapigboy4551 5 месяцев назад

Seems like these views were botted due to the low comment rate.....

@tenchuu007 Год назад

I see you, Claratin user.

@thenextlayer Год назад

I don’t use Claritin that much lol those are a different drug I’d rather not say ;)

@AndrewAHayes Год назад

You dont need a 3D printed part to collect drill dust, just roll a peice of masking tape so the sticky sides touch each other and place it on the wall below your drill hole, there will be a small gap between the tape and the wall where the dust will collect and stick to the tape

@upsetmiltosplays3446 Год назад

i am greek so it seems pretty english to me

@thefish5861 Год назад

I have a printer, but I’ve decided I don’t want to devote my entire life to figuring out all the crazy Greek you're talking about. I didn’t sign up for freaking brain surgery.

@userou-ig1ze Год назад

didn't find the food safe in comments

@thenextlayer Год назад

I', shocked.

@charlesrestivo870 Год назад

Nozzle change is not necessary

@chrisfrisch1347 6 месяцев назад

you sir are a much better video maker than you are a 3d printer

@thenextlayer 6 месяцев назад

hahaha that's fair, this channel is about bringing you along on my learning journey and getting to share as I learn this hobby that I love. Never claimed to be an expert in anything!