N108 Valve Test & Replace | VW T4 2.5tdi 

Hope this helps a VW T4 2.5tdi owner in the future.
I had to test and replace my N108 valve after it started throwing up error codes 1252 and 1251.
Fault code: 17660 - P1252 (N108) commencement of injection valve : open short to ground, but I had no broken wires...
In the end I bought a new BOSCH SOLENOID VALVE - 0281002265, which comes with a two pin plug that is easy to remove, so the pins can be inserted into the ten pin multiplug at the bottom front of the ACV/AJT 2.5TDI engine.
Resistance across the two wires on the brand new N108 is about 15ohms which confirms the required resistance across the two wires if you're testing yours for faults.
On a functioning N108 there is also continuity across both wires.
I replaced mine without removing the fuel injection pump - in the video I explain how.
Happy Days!
#campervan #vwtransporter #campervanlife #vwt4 #diycamper #vanbuild #selfbuildcamper #vaninterior #vwbulli #t4 #transporter #N108
Website: www.adventures...
T-shirts: www.love-and-t...
For Passenger Clothing discount visit community.pass...
Thank you for your support!

Авто/Мото