Nanrobot D6+ Keeps Cutting Off 

how do you set the settings to P?

Yeah In My Last Video Before This One I Tried That And Went For A Test Ride And It Still Cut Off Sadly

@@ItsMallie Chinese 🇨🇳 0:45 made junk man .. this company scammed me out of $1,600

​@@ItsMallie Bms bypass

@@brandongardnerman123thermal runaway

your scooter is a "48" volt when in reality 48 volts fully charged is 54 volts so thats normal. how it works is your battery is probably a lithium ion battery pack If you where to open your battery pack you would find multiple cells and each individual cell fully charged is 4.2v and the nominal is 3.6v A lot of company's and people like to calculate battery voltage by the nominal because they say to count it by its fully charged volt is confusing... idk why it would be confusing but yeah. So once again thats normal for your scooter.

It Took Mine A Year But You Might Be Good because You Shouldn't Be Getting A First Gen

@glen davis......how is your D6+ doing?

I have the lightning and no issues. Check your P settings for the battery cut off voltage

@@grazz7865 how

@@MaddBatReivewscheck the owners manual for the section marked “P settings “. Scroll to the P settings for voltage cut off. Set the value to 42

Yeah These Cheap Battery's Aren't Very Reliable And Don't Seem To Last To Much Longer That A Year. My Project Flash An 3000W Moped I Built Back In 2020-2021 Battery Is Also Doing The Same Thing And Its Extremely Annoying Because The Battery Cost 700$ But Was Still Considered Cheap Simply Because Of Lower Quality Cells.

There’s another video on this to “wake” the battery by disconnecting the battery then reconnecting the battery. Sort of like a reboot. Other possibility is the controller is bad.

Well, you could sell it and use the money to fund another project. Might be nice as to convert it to a go cart with 2 independently driven rear wheels, front wheel drive may be have too much torque steer. But if I had it I just ballance the battery and ride it. Was going to buy a D6+ last year but my D5+ 2.0 was too young. Now they have the new LS7+ I want that even though scooting is illegal here in England. I'm from Chicago but live in the UK, otherwise I would probably make you an offer. Be careful with the re-ballance charging as NanRobot doesn't want people to do it as there may be a risk of fire! So you probably want to do it in a safe space outside if possible or at least away from anything in a well ventilated area. In any case be very careful. That scooter that is charging to 59 volt may be overcharging a cell, 4.2 * 14 = 58.8. Max safe cell voltage is 4.2 per cell or cell bank and there are 14 cell banks in series to make 58.8 volts. It could also be a bad sensor reporting too high. Your D6+ charging to 58.2 indicates an un-ballanced pack, one cell is going above 4.2 before the others and then when you ride those other under-charged cells or cell are going too low under load, maybe 3.3 volts or something that's when the BMS stops the show. Have fun!

Mines Shuts Off Because I Have A Bad Cell In The Battery So Its A Battery Issue. With The Ls7 idk If That Has Problems I Haven't Looked At Any Electric Scooters In A While So Ill Have To Do Some Research.

@@ItsMallie thank you. Any input is appreciated. I may get one just with the extended warranty to cover any issues

Don’t ever buy this Chinese made pile of junk

I got the lightning. Doesn’t seem to have any battery issues.

It Started About A Month Ago But Ive Had This Scooter Since august 12th 2020

I shared your video with roadrunner , and they said probably blew a transistor ..the same issue with mine , I’ll update when I install the controllers to see if that does it

​@@justinalbritton9685 did you fix it? Mine cut off for the first time today but I've had mine for years. No battery voltage indication after it cut out. Waited 30mins still no battery or any lights of any kind.

yes but i never read it fast enough lol

Bms bypass

@@brandongardnerman123bad idea. That’s how they develop thermal runaway and fire.

Im pretty sure its a bad cell i just don't have the money right now to get a new battery. On there website they don't sell just the battery anymore so ima have to find it some where else

Yeah I Think It Mean You Have Unbalanced Cells Which Means You Have To Get A Whole New Battery

@@ItsMallie thanks! Finally RoadRunnersupport decided to send me a new battery but i had to pay for S/H, not a problem…as long as my D6+ would fix this cut off issue. Chatting with them about this issue for a week well worth it. i told em what you had told me about the problem. thanks again! And thanks for all the peeps made comments down below. Peace!

@@deetee7522 Ayy! No Problem And Im Glad I Could Help.

Yeah i found that after words. sold the scooter about 6 months ago finally

Yeah These Cheap 18650 Batteries Are Not Reliable And Dont Last Long

Damn. so your telling me not even nanrobot knows what to do?

Uhh the first tech guy told me he thought it was the battery , but his superior thought it was the controllers. So they sent me the controllers, may be the battery after all. I’m waiting for customer service to respond and see about shipping me the battery or a refund .

And also mine is dead at 55 volts .

Hmm. well thats still leaves me having to decide what to do with this scooter because im sure there not gonna send me a battery since ive had this scooter over a year now and i dont have 600 to spend at the moment.

nah

Damn. I plan on finally opening mines soon to see whats wrong but the components in these nanrobots explain why they are so cheap

You can’t leave these batteries sitting too long. Lithium batteries usually cannot recover from a complete discharge.