NANROBOT RS7 Hydraulic brake adjustment. Electric scooter how to. 

Nice job love the channel I have a quick question is Ginger a Socialist Liberal Bernie Dude ? He stop answering me since I ask him if Mexicans were playing soccer at 3 am

I wish you posted this earlier. Spent an hour trying to adjust ls7 breaks today. Finally managed to adjust them perfectly using the same method. Great video. 👌

Your a life saver!!! The mechanic lossen the screw on the hand lever and never told me it will affect how the wheel brake. So when i press the brake it wont stop. Isnt that dangerous???

My problem is that those brake pads or calibers don’t move when I press the brake. I don’t have the exact same scooter but the brakes look identical. The problem is not in the brake handle, I’ve tightened and losened it. The brake is just so tight and doesn’t really brake at all when I press it as hard as I can.

Bro the way you explained this is like no other I was aware of the break handle thing but only thought it tightened the stiffness of it, had no idea it moved the breaks, I have been in break disk hell as my break disk came shot when I recived my scooter... Bro thank you, I think you solved 99% of my problems.

My scooter makes like a bell sound on the rear disk brake,if i do this you think might eliminate the noise?

This method works on my yume d4+!!! I was having some rubbing and the rear wheel wasn't spining as freely and making a sound, now its good as new!

I am curious,does your RS 7 use cable actuated hydraulic brake calipers? Systems that are partially hydraulic use mechanical brake levers with a cable to operate a hydraulic caliper at the rotor,whereas a complete hydraulic system uses both hydraulic levers and calipers. You posted your video 4yrs ago,but I just came across it on RU-vid,and I am not sure if you still have the scooter and are able to check the brake system to answer my question.

Iv got a gunai electric scooter the brakes are the same as that video and it really helped me thank you

Have you seen a large improvement in grip with the street tires? My d6 came with knobby off-road tires and they are pretty twitchy and don't want to go straight at low speed. I was thinking of just replacing the front tire but I'm not sure yet.

Thank you for the video I got mine fixed from adjusting the calipers

I got a Mercane Wide Wheel scooter 🛴 do you think I can do the same?

Thanks you very much for million dollars information 😍 . I just reach home after to see technicians electric scooter . Just to make tight brakes he tell me to change the red part near wheel 🤨 cost 100€ . But when I find your video and watch then do same process . I save right a way 100€ . Thank you so much again 😘🥰

I have the gunai gn10 and this has helped me INCREDIBLY !!!!! GREAT VID 👍

Thanks for the very valuable info I find it very useful cause I have brake pads a little too close to the disc and my disc is a little warped causing touching. I have a situation I tried to remove the deck cover (where your feet rests) but it won't come off.. :( I removed all the screws but it's jammed in there real tight and I could not pop it open with my own strength. I wonder if the retailer glued the deck for sealing purpose or to prevent user from opening it to void warranty. I need to be able to remove the deck in the event I need to troubleshoot or replace batteries.. My scooter is generic brand 5600w scooter that looks very similar to yours.

When I squeeze the brake it's not grabbing the caliper why?

why is your brake handle moving almost into handlebar?

Exactly what I needed bro, thanks

great stuff! I just bought the NANROBOT d6+ with hydraulic bakes. amazing scooter but the pads were rubbing. now thanks to you.. I'll be fixing this bad boy up and ready for work tomorrow! keep it up!

WHen I adjust that little screw under the handle, the pads are rubbing. But when I loosen it up to where the pads aren't rubbing, the brake handles pull in way too far, it's like there's no happy medium. ugh.

Hello , my scooter thinks the breaks are enabled when I turn the scooyer on it’s a 2400w one? Have you got any suggestions because it doesn’t move

This was exactly what I was looking for! Thanks for posting. Can you upgrade the calipers on these?

My scooter keeps on jerking when i put on the brakes. How to adjust it?

Not sure if you're aware but your rear tire is mounted backwards

Sir where I can buy that beautiful hydraulic brake

Great video. I will try this later when I'm home . I changed brake pads of my yanobike t10 Hydraulic. And didnt know about the scree by the lever . Back wheel is sticking big time . This might save me

Hey from where i can buy this hydraulic brakes?

which one are better disc brakes or oil brakes based on your experience with scooters?

Thank you sir!!!

Dude you are the man, ty so much

Very helpful information, Thanks!

Hey I just bought an ls7 model used and the rear brake has no grab. I pull the brake and it barely moves. What do I do? I turned it clock wise but there's no pressure. Is it possible to turn it too far or is it just the break pads being too far gone

Do you know where I can buy these brake pads?

TY for making this video. Very helpful.

Does this process work the same way with the rear brakes? Just got my RS7 Nanrobot! Please and thank you

Very helpful video D6+ Brake alignment sorted,, Thank you.

Can u do the oil brake adjustment on the d6 plus?

Thanks 😊

Out of curiosity Are all break caliper size are the same Or it's dependent on manufacturer?

Do you have an idea about when the break light doesn't work anymore please?.

How do you change the pads ?

Will this work for a nami? I’m finding it hard to move the wheel in certain areas,like it seems to be getting a little stuck.... and I tried the break handle thing (I may not be doing it right) but I followed this and it seems to be making it even tighter...?

Yesterday I received my new RS7 (yes you can still get them new) I have a concern about the spring clip on the top of the hydraulic break caliber, the clip seems like it will pop out at any time, what do you think about this issue. By the way, I was amazed at the size of the deck on scooter especially how high it is, this things a monster 👾.