Ive this model.. its been in cupboard for a year.. ive gone to use it today, it makes a noise but no water comes through. Ive used the pin on the needle bit but nothing.... do i bin it? 🤔
The symptom of the machine is pump not working...in the other hand of your unit..if you can hear the pump vibrating...just take the pin for the ..as long as it will fit into the pin hole of the capsule holder..check for clogged..if still not working..open the unit..make sure 2 small pipes are good..you can remove from the pump then give a blow..while opening and closing the hot and cold lever...and if still not works..go for the pump motor open it check for small spring if its not broken......final...replace pump motor....
thank great video, my problem not the fuse, I over cleaned it with water, I didn't, think it would so must tech, IC chip, what! ┗|`O′|┛ so opened it up, and seeing That circuit board, I through, I've ruined it took out the circuit board, blasted it with a hairdryer, dried it out all bad to working, thanks, 😀😀😀😀😀😀😀😀❤❤merry christman