Nespresso Vertuo Next orange blinking light 

You saved me a trip to the store thinkin it was broken. Your are the man!!!!!!!!!!!!!!

hey, I tried your fix and I know that it worked for many here but it did not work for us. I wanted to share another tip for those that resetting didnt fix. We called and went through their tech support showing video of what we had tried to them. They also suggested the 3 button reset trick first, but after that failed while showing them they had me clean the clear plastic ring where the cartridge gets placed. Apparently the barcode on the cartridge is read through that clear plastic ring, and ours didnt appear especially dirty but after we cleaned that ring with a slightly damp towel (just top and bottom, in place, dont remove it) it worked! Just thought I would share and hope that solves someone else issue.

You are 1000 times better than trouble shooting on manual and their customer service. You saved me

After trying suggestions that I found on the internet to solve the orange blinking twice problem (including yours which unfortunately did not work for me), I was about to give up. My last attempt, which was successful, was to hold the coffee maker upside down over the sink and spray hot water around the pod holder. A lot of coffee grounds came out. Someone said the grounds could keep the unit from reading the bar codes on the underside of the pod. His or her suggestion was to disassemble the unit. No thank you. This was easier. Thank you anyway for your video.

I did the factory reset first and it didn’t work. But your vid did help because that thing that spins was not spinning freely so I nudged it and finally spun. I then resetted it again. And it works!

Bro, you are a genius. I tried everything. It made no sense to me lol

Thank you so much 🙏🏼 this is the only video that perfectly explained and solved my issue!

Thank you. Yours is the only solution that actually worked for me.

Took me a few times doing this method and it worked!!!!!! Thanks!

You’re amazing!! I searched everywhere and you were the only one that helped me!! Thank you!!!!

Yesss thank you so much!! You got it right. Life saver and money saver. I appreciate you.

🙌🙌🙌 thank you!!! I tried every other fix! This one worked!!!

You just saved my life this morning thank you!!

Thank you so much. This is the only video that was helpful

THANKS for your advice! I tried everything and this was the tip that worked on my machine!!! ☕️

I tried to hold it down for 5 secs to get the factory reset. Cleaned the centrifugal spinner. Cleaned the clear bar code reader. Descaled I don't know now many times. Not nothing worked. I was just about to throw it in the garbage and buy a good old coffee pot machine. Then I tried to spread the metal "wings" out. Holly crap it worked! These machines are super difficult to get working once they have an issue. I wish that Nespresso would make them easier to operate.

Omg Yes Finally after an Hour FINALLY 😂😅😍😍 I had done 5 different techniques and Nothing this one finally helped but did it 2 times in

THANK YOU! That was the only thing that worked for me.

Omg thank you for this video! I tried everything just like you… hallelujah I can have coffee again 🙌🏼

Thank you for the video and guidance. I was about to take into the yard and smash it with a 14 lb sledgehammer but, hey, it worked. 5*.

Thank you! It worked for me!! Happy coffee lover

This worked for me! Thanks a lot for the video!

This worked for me!!! Thank you so much!

plus if you have a new pod in there, and you don't want it to drop in the holder or try to put it back in again just right to reuse, you can just partially unlock it so the top part only comes apart ever so slightly, then you can hit the button 5 times in 3 seconds and it will reset. then just lock it and it will be successful but this time keeping your new pod in there ready to use

Thank you!!!! It worked 😭

Oh thank you so much, you save me with your magic trick! Oh yeah ☀️

Thank you. Perfect video

Oh-Thanks soooo much!!! This totally worked ❤️

Thanks buddy, huge help

Worked for me 👍🏻 but then it went back to orange the second time. Thanks

Saved my morning! Thank you!

Thank you so muchhhh!

Thank you Bruder 💪✌️👍♥️🥳🤙

Thanks this is very helpful 👍😌

THANKS for your advice 😀😀👍

Amazing ,genius ,thank you.

Well, looks like that worked for me. Thanks for the video.

You just saved my GF and I’s relationship

Thank you man!! Awesome!

It worked, thank you!!

You are hero!

Good stuff bro, thank you solved my same issue

Thanks so much

Thank you so much that worked for me

Thank you soooooo much! I tried everything, and nothing was working. I was getting desperate!

Thank you!!

thanks bro

THANK YOU!

Thx man!!

THANKS!!! ☕️

Thank you this worked

That fixed it thank you!!!

Que aser. cuando chorrea solo el agua y no sale cafe teniendo cafe

Thank You , work great !!!

I like vertuo plus better than the next

Working! Thank you

THANK YOU !

Thanks, this helped

Thank you

Dude life saver

Your video at 45sec, you’re trying to spin that top part underneath.Yours moves freely. Mines completely jammed. How do I get that last to spin again?? I’m assuming that’s the problem but I can’t get it to move.😩

Worked for me!

Thanks for sharing. I tried everything and nothings been working for me. I tried your method and it still won’t brew any coffee. I’m so frustrated. I’ve been trying for a week now. The orange light won’t go away

Thank you so much!!!

Hi I also got the orange blinking light and wasn’t sure what it was. My 6 year old was helping me make a coffee and slammed the top when closing it and after that I realized the orange light was on and also noticed when O close it, the part that turns to the left covers the lock symbol when all of nespresso vertuo videos show it falls past the lock sign. I noticed in your video as well it falls on top of the lock sign when it should originally be falling behind the lock sign. Did you happen to slam it by any chance? It also falls behind the unlock sign when it’s opened and all original nespresso videos when it’s opened it falls right on top of the unlock sign when opened. I think our issue is that we possibly damaged it when closing it? What are your thoughts? Have you noticed this at all?

Didn’t work for me

I tried but unfortunately it doesn’t work

Thanks it works.

Mine doesn't reset it just stays on solid white light still

Fast forward to 1:40 dam it took forever for him to explain

This didn’t work for me, what ultimately did was giving it a good few smacks on the side in frustration. Guess we’ll see if it works tomorrow

Interesting

Did not work for me unfortunately. But thanks for the tip 👍

Bingo! Thank you!

do you mean leave it unlocked status at the middle and just hit 5 time button, it reset?

Didnt work!

This didn’t work for me. What should I do next?

THANKSSSSSSSSS

👍

The reset to factory settings worked but now my machine is loud as hell

tnx

IMPORTANT!! I tried this fix and every other and they all FAILED !! I then installed the nespresso app on my phone, navigated to my machine, hit " maintenance " and BOOM.....it said " software updated" and all was FIXED !!! Do NOT throw away machine !!!

The information could’ve been expressed so much faster. Just give the solution don’t go through all the problems steps you got to get there.

The only thing for me that works is this: 1. unplug the unit. 2. remove the water container and the empty pod container. 3. open the top. 4. TURN THE MACHINE UPSIDE DOWN AND TURN THE ROTATING MECHANISM WITH YOUR FINGER A FEW TIMES. 5. put everything back together...done.

Ok, that didn't work. Here how I got mine to work. Open, spin the thing at the top with a spoon. Then close (don't lock) press hold for five seconds. The orange light will stop blinking. It will not flash white. Now unplug the unit. Open the unit and plug it back in. Put in a coffee pod. Press down and lock. Then press the button. It should spin up and brew if not repeat and the second time it will work.

Didn't work, great coffee, cheap machine

Thank you so much, this video saved me!