NEW Arrma Kratron EXB "MASSIVE!" Mega mound sends and quick fix mod tips! 

No disrespect to all the other Arrma bashers out there, I enjoy watching all of you guys but I have to say you are the Master Basher hands down. That new EXB is a beast and who better put her through the mill other than you. Really enjoyed the vid. Absolutely awesome Dude👊

You and Rich always proving that Arrma actually builds some pretty tough rc aircraft.

Awesome hang time ! The Last Airbender !

Awesome bro 😎😎😎😎🤤🤤🤤🤤🤤don't just Bash. Blast!!!!! You are the man 👍👍👍👍😎💣ramp it up yeah

Great video just dieing to get my Truck back out of shop watching. These video is like going threw withdrawal lol

I just commented on Rich’s last video saying how you guys just continue to out do yourselves lol. Awesome bash to the maximum! Thanks to you guys for bashing the snot out of these cars for us all!

If there were Rc Xgames you would be the Winner! Awesome work here👍✌🇺🇸

you make it look so damn easy! great video man👌🏼

Pretty hard bashing! Nice

New levels of crazyness on this one brother Eric. Some high speed reactions were needed throughout.... Very entertaining indeed. That M2C chassis hit to the log was insane, just tossed it down after and "M2CTough" baby. EXB+M2C=Hyper Extreme Bash Addition. Killed it bro.... The way you save some if them airs like 😜😎 Rock on brother

Like #252 insane bash your definitely showcasing what the exb can do 👍🏾

4:38 WOOOOOOOWWWW 😮😮😮 what a saving! Never seen that before! Absolute awesome driving skills. Men, you drive better then me *lol* Very nice sendings and the rig is really something. 😘😘😘 from the Basherqueen !

radical rc bashing area there nice

Absolutely EPIC run Brother Eric 😜!!!! That spot is AMAZING 😱. Talk about a bashing gold mine 👀. Those mounds look built for full throttle floaters 🥰🥰. Great job with the arm mod. I wanted to do the Thomas P mod but it didn't look doable with the RPM arms. Not enough meat to work with 🤣. The stock EXB arms are beefcake no doubt. I really like the geometry they went with on this 👌. Gonna stick with the 3mm chassis for now, just not without the T to T 😱🤣🤣. Super impressed with the handling and durability overall. The LP's should take about anything you through at them power wise 💪. Just lose some of that cushion at the rough spots. So stoked to see you getting back out after the baby Bro 😍. It gets tough to find "free time" like before 🤗. Great job with the tips and pointers and brilliant bash session Brother!!!! Hope you can get back out there. That spot is next level 😱🤙🤙😎💪👊👊

Big Air Baby !!! Eric, thanks for the tips and showing your rig.

Wow💨💨🚀 that thing is a monster my friend

Killer outings man! That rig is proving to be one hell of a platform for the money..😎.. home run for arrma..👍

That was a heck of a bash!! You definitely tested the things durability!!

Gotta say, you have to be one of the best basher driver on you tube. Your video never disappoint, keep sending it bro. Congrats on the new addition to the fam!

Approx 3min mark you did a new trick atleast for me... a "knuckle huck" styled launch off that sideways and flattened her out at the last second man 👍👌🍻

Little disappointed the m2c chassis was put on, I wanted to see just how much punishment the EXB would take. Still a great bash vid though.

Wicked jumps I can tell your up high great bash brother 🤜🤛💯💪👊😎

Dude, Great bashing awesome vid. I feel so sorry for that log 🤣 🤘🏼🤘🏼

Welcome back I’ve missed you and vids . The KING is back!!!🔥🇺🇸❤️

Awesome video. I truly enjoy my Kraton exb. I Checked my diffs and the front was empty and the rear was low. I did a vid because I never had a Kraton and wanted to document how to do it.

Man that thing is a monster! I can’t wait until the Typhon EXB comes out. 🤫🤐

Just sick bro. Insane air and flips. Always awesome thanks

Your bashing vids along with a few other people got me back into RC's and got myself the V4 and then recently got the EXB Keep on bashing brother take care!

I really enjoy your videos. Your my favourite because your driving hard and showing us what they can really do even with upgrades. And so I know I won’t drive that hard and mine will last a lot better 😂. Anyways thinking about getting this Kraton EXB and selling my Kronos. I’m also in process of building my M2C equipped Typhon 6S V4. So far I’ve got M2C front and rear shock towers and front and rear chassis braces. 🇨🇦🍻👍 take her easy and make sure that dust doesn’t choke you that’s real dusty!

awesome bash as usual my brother...keep em coming...and enjoy the new blessing 🙏

Dag you are a professional basher! He went beast mode on the exb.

Killer session brother E🥰🥰🥰🥰, that m2c took the log without a blink 😜. Sick airs as allways, just plain simple sick 🤗

Yes yes Bro 😱 what a bad Ass Bashing Bro , 😱 its a Speed Monster on Steds 🤜💥🤛 Arrma Tough for Sure. Yet again you didn't disappoint us all. Nice Fix on sight to bro. She did take a pounding 👊Really enjoyed every minute of this Video as always 👍🇬🇧🥰🇺🇲👍

Awesome Spot for some major EPIC bash Eric. EXB is hella Tank with the Goliath chassis. Huge drop makes for some awesome downhill angle views. The stacked was Nuts! 😱😂🤣 But took it like champ! Massive Ramp launches! Sucks on the arm breakage but the slight RPM arm mode got the Job done. So glad you were able to get some time out brother. I know how it is when it comes to family time 😁🤗😍. What a killer balls to the walls session Ramp Blast bro!

Awesome RC and great bashing

Awesome bash fest right there.

Nice session brother ! Those giant mounds where gnarly for sure . 😎🚀👊

This video is the reason I’ll be buying one of these cars thank you

That one wheel upside down launch was sweet!!

Nice 👍🏻 😍 👌🏻

love the videos... i recently picked up a v4 talion that id like to finish off with m2c upgrades but im struggling with the suspension and handling right now and was going to see if i could pick your brain on your set up for shocks, diffs, and gearing

First time viewing your videos. Man you send it I had to rematch a few times and slow down the video just to see how many flips you were doing. Awesome job man. Subbed !

Sweet spends bro👊👊👊👊

As always awesome job. I look forward to every video 🍻

another great video brother.. You totally send it every video 🔥👊🔥👊🔥👊

Damn that looks fun to launch off those mounds!!

Dam man! Is that another new spot 🤔 Loved that front flip save 👍 Great info on the RPM arms compared to the EXB arms 😃 Love all those big backflips off the ramp!

Dude, immense!

Sweet ass bash bro as always!! I loved the jump where it looked like you were still inverted before even leaving the ground lol

Sweet vid as always ;) Nice location👌

Awesome spot!!

Ground control to major tom. She scoots. I think there's tree's to always slow us down but they dont. SEND IT. 📡👽🇺🇸 ROLL!!!

Veru Nice tedte🔥🔥😎👍🏽

give it some wings of carbon n fly itttttt hehe peace thx good vid

Damn Everytime I watch one of yours or rich duperbash videos I get so jealous that I live in Minnesota where it's all marsh and large open dirt pits like this don't exist 😆

Fastball fury

Whoa! Those were some big dirt piles your were jumping off!!! I swear that's the highest Ive seen you land an RC from? 😮😮

nice jumps

Crazy awesome bashing. What batteries are you using? I’m surprised they haven’t gone up in smoke from those hard landings

Great vid exb really is tough as nails 👍

#1 Yessssir! Bash City fam... 💪🏾💯

Is the arrma's new roller? Look's different than I saw the other day on RU-vid! That's some Awesome bashing goin down bro, double backflips, man that puppy gets some air! New subscriber?

Glad to see you out playing with the toys, how’s that new baby doing brother? Hope all is well dude

DUBBING @3:05 The Eric upside down'er

I'm running same diff oils except 30k in rear, on my regular Kraton, I have same problem I lose speed with LPs but I keep ripping backflips and copperheads , man I didnt want take apart brand new exb but ik your right have check those diff oils

SHOULD be TELLEM ABOUT CHECKING TO MAKE SURE THOSE DIFFS ARE SHIMMED RIGHT TOO 👍

man i'm running almost the same setup and blew up the rear diff just doing some tests.

Looking to get this truck next week what doni need to get to bulletproof diffs and a good motor option gonna go with Max 6 or max 5 esc

Dude !! You are my favourite basher, not Arrma , not Traxxas !! please upload some more tips and informative videos as well.. lotta love from India.. if you come to India , let us know ..

Please tell me that you can explain why my rear diff in my kraton exb 6s seems to be rubbing on the chassis

Do you always land on your wheels or do you edit out the bad landings. But I was thinking at the hight and distance your jumping a bad landing would end your day. Your air throttle control is amazing 👍

Im about to buy my first 6s truck and its the exb im aware of the issue of the rear diff but didyou ran it with the open diff in this run? Its the only thing that kinda makes me nervous about the purchase and the fact that the shims are in back order until november

It looks like with the geometry changes people can't upgrade V4 to EXB towers without the arms. Is that correct?

Great video man that spot looks like a blast. 23t pinion thats sweet howd the tires like it? Did arrma change anything about the sway bars? Definitely have sway bar breakages on all my rigs haha i end up using old pinions on the end to hold them on cuz the plastic breaks. Sending it off that huge mound is just so much fun to watch , she really tool that log kiss well. Do you think you would use the nee diffs in other rigs? Thanks for another super awesome vid man🍻

Would you do all that with a maxx just asking . i have the maxx heared its tuff . but more and more i see arrma idk arrma seems pritty tuff compared to traxxas

With all the sick bashing, how long of a runtime do you get per session?

Hows the rear diff holding up?

Did you put a lock nut on top of the rear Chassis brace screw?

Great video! With that motor and esc how much faster then stock blx Electronics?

My first arrma EXB I find you to be very knowledgeable! I just opened my new EXB and the back tires seems to be toed in ? And the front right tire is pointing straight but the left tire is pointing to the left or toed left ? Not straight like the right tire ! Is this correct? I somehow don't think its right . Your thoughts?? And thanks

What batteries are you using?

Hi Eric Why did you remove center brace bar? Useless with m2c chassis?

What you recommend if I’m new in rc world ?

Did he flied?

What KV motor and spur and pinion are you running

I keep breaking screws on the center chassis braces front and rear. Should I try titanium screws? Everything is upgraded M2C and RPM

What are the exact tires that you use with this. I want to get some but don't know the size.

So are you saying yours came with low diff fluid? I just got mine🙄

If out of box with stock blx setup will go 60 mph. How fast will your setup go?

What batterys you using bro?

Hey bro what shock oil weight you running in this?

Who makes the copperhead tires? Are they pre-mounted rtr’s?

is the car better than the x maxx s8 ?

Do you know Kevin Talbot?

Rpm or exb arms

I can see it...but my brain cannot process it......its not normal what you do with these cars!!!!

A Kraton v5 and it's still sucks. It's a damm shame

Blah blah blah