New (Broken) Flares for the Pajero Mini - How to repair fibreglass 

Thanks mate :D

Bingo to both, same with carbon fiber work.

yup, learned the chopped mat and resin trick from my brother who spent a good number of years building fibreglass speedboats :)

Normally 40-60 to get going but go gently

@@BennysCustomWorks Yeah heavy grit or score the shit out of it with a razor knife. On repair work you will only ever get a physical/mechanical bond so a rough surface works best. If you need maximum strength, say for a bar or lower lip, drill small holes around the area being repaired and sand them down so you have no hard edges to hold air. When you laminate from both sides you will have a mechanical bond to the original surface and a chemical bond holding all three layers together that will help prevent future delamination. Also if you can only work one side at a time don't stress as the resin will still reach a chemical bond for about 10-20 days depending on the temperature you're working in or just ask for unwaxed resin if buying bulk like a 20lt pail. But most of all be careful with the MEKP catalyst as it will burn skin and by the time you feel the pain it's to late, get it in your eyes....3 seconds and it will begin to burn and send you blind. Lastly, 100% keep your work dry, water will kill the catalyst dead and stop the reaction in the resin leaving you with a uncured spot that can be a total pain to remove.

Do you know who made them? Thanks :)

@@BennysCustomWorks Noo, I do not unfortunately. They came attached to one of my Minis at the time of import. Do you have an cutout on right rear for your fueldoor? Mine has. They might not be the same after all, maybe.

Sorry it’s 1/1 worldwide . #backshelf

He was using safety squints, better than safety goggles/glasses 👍🏻👍🏻

Benny follows the Chuck Norris school of face protection. Under that beard...... Is another fist!.

Can’t tell if you’re angry or continuing the very clear joke.

Indeed

And do what to it? The Viper is a side project.

@@BennysCustomWorks Car life, when your side projects create more side projects to your main builds that you have parts for but can't work on because of all the side projects that need to be done first.....!!