NEW MOD: DODGE CHALLENGER SCAT PACK MOPAR BLACK HOOD PINS INSTALLATION KIT. PART NUMBER: 82214260 

Looks good! I would be super nervous about drilling into my hood.

Very helpful, installed mine today after months of being afraid to drill those holes. Thanks!

I have had my 15 limelight scat for 7mo. now it came with the Mopar hood pin kit already installed and i love the look plus sets it apart from other challengers i say its worth the effort to install and gives it a true 70s vibe.

I would of thrown up the sec I drilled into the top of my hood . I do want to do that . But I can’t get met self to drill into the hood . Lol

Such a cool mod. I would be very hesitant to drill into the hood but after your vlog I would feel confident doing this. Adding this mod to the list. LOL

Just finished up this mod. Set comes with 2 pairs of grommets, one for the hood and one for the plastic cover. For the plastic cover i recommend using the 1 1/4 inch hole saw for the holes. Helps the grommets fit better and looks great

Nice! I like the build 👍

Great Video!

Well done Looks great Just picked up a set for my ole gal Looking forward to dropping em in over the winter

Sick!!!!...my leg started shaking when you were drilling the hood!😅

Dudeeeeeeeeeeee my anxiety was on 1000 watching your dad cut the hood😂😂😂 he did an excellent job!💪🏾💪🏾💪🏾💪🏾

Looks beautiful getting the same on mine. Mine is also Destroyer Grey so gotta do the black pins. Install August 8th. Can’t wait! Nice video. Thanks.

Very nice, make sure you remove the clasp pins before pulling the hood release cable under the dash. Good job.

Thats a badass mod fam, I would be super nervous too. Great idea using paint to make drill marks. The tape is a must to protect the paint. Keep grinding, stay safe 🤝🤝💯💯

Hood pins look great.

I plan to order but I'll be watching the vid about 100 more times first lol

Adulthood father son time is the best time!

Great video. I just ordered a 23 Challenger Scat Pack Widebody Shaker and I'm going back and forth on the hood pins. You did one of the things I am worried about painting where you drilled out the hood. I would like to think they would do that from the factory or the dealer whoever does it but I wonder? I guess if I do it I can always remove the grommet washer and look to see?

The 1320 also comes with hood pins. my make date is june 8th. I'm glad I got hood pins. Very clean job.

I couldn't bring myself to drill holes in my black R\T but I found some amazing looking fakies on Amazon

It’s so hard trying to convince my dad to let me put these on instead of taking it to a shop😂

Whoever disliked this video is just hating, great job and looks good

WOW, yup no room for mistakes & looks Gr8!!! My one & only concern is (Chafing) on the hood with the wire, there is going to be movement while on the highway, & over time I see that becoming an issue. I like the way it looks, really ups the macho of the total package, but I need to research & hit a few MOPAR car meets to get some feedback.

You guys look like me and my dad working ha

very cool. ive already drilled a hole in my trunk for the performance redeye spoiler, so i got that confidence to do the hood now. its a shame the hood pin kit has skyrocketed in price now. i thought it use to be like 170-200, now its like 300+ wtf

I just got a 2023 Destroyer Gray Scat Pack. I think like yours? . Is yours destroyer gray? Did it came with the shaker hood? I’m planning to install a shaker hood on mine soon . Yours Looks nice!

I ordered mine from Stevewhitemotors on eBay and I already received it and I’m waiting for this Saturday to get it installed. My car is also Destroyer Grey but my hood has a satin black hood wrap.

👏🏻👏🏻

GREAT VIDEO, just curious at like the 3:56 mark your pointing to the bolt and plastic rivet with the bolt being closer to the firewall and the plastic rivet is at the front yet later around 4:53 your putting the bolt in the front...... are they are reversed......or was this a boo boo???? Just curious, still a great video, thanks for sharing!!

a little nerve racking but it turned out awesome bro :)

I wanted to do this but drilling into sheet metal makes me cringe. I've drilled through plastic easily for my bumper diffuser. But this is on another level.

Doing it tomorrow, so wrote down the steps and sharing it here if it's useful for someone! Items required : Mopar hood pin - 82214260 (If not this part number, DO NOT INSTALL). 1 1/4 Hole SAW for Metal. 1 inch drill bit for Plastic 7/64" drill bit for pilot hole. Touch up paint black. Marker paint - white / yellow. Steps: Step 1: Remove Plastic cover carefully. Step 2: Locate Plastic Rivet and Screw Step 3: Remove Plastic rivet and Screw (Use 10 MM socket for the screw) Step 4: Slide in Bracket and reinstall the screw and plastic rivet. Step 5: Repeat the same step on other side. Step 6: Mark the tip of the hood pin with white or yellow paint and slowly lower hood (Slowly, so the paint mark will show where to put pilot hole) Step 7: Drill pilot hole in both sides (Only for lower portion of hood) Step 8: Put a paint mark again and slowly lower hood. If it touch right place, from beneath the hood, put the pilot hole slowly through the top hood. Step 9 : Repeat other side. Step 10 : Put another pilot hole for lower part of hood , very next to first pilot hole. Step 11: Remove the POLE and the lower the hood slowly. Never drill hole with pole in place. Step 12: Put masking tape on hood tope for protection. Put tape around the pilot hole, so no scratch to rest of hood. Step 13: Drill into the hood from top. Step 14: Apply touch up paint generously, so no rust. Kindly make sure it's done, else it will rust out in no time! Step 15: Repeat step 12-14. Step 16: Measure hole for plastic cover and make a pilot hole on right place. Step 17: Drill through plastic hole and re-install the plastic. Step 18: Re-install the hood pin pole. Step 19 : Repeat same step from 16 to 18. Step 20: Through under hood, Install gromets into 2 holes after paint is dried. Make sure it fit well. Step 21 : Test fit the hood pin POLE once hood is lowered. Make sure it's sit correct and centered. If needs adjustment do it now, so it will bend hood later. Step 22: Remove masking tapes. Step 23: Without removing backing sticker, place the top grommet with MOPAR facing front. Make sure the pole is sitting correct and not hitting it/ touching it. Step 23 : CLEAN surface and place the decorative Mopar caps where the letter MOPAR facing FRONT. Step 24: Adjust height and then tighten the NUT for the base. Step 25: Remove plastic cover and feed the wire through the grill. Re-install plastic cover and slowly lower hood to see how it fits. A perfectly installed hood pin will have no issue when lowering hood and it will be having enough play on top, not to destroy the hood when someone pull latch without removing hood pin.

Looks really good! Have you had any rubbing issues from the wires?

Thanks man, I am going to do it on my Shaker this week. Dang it's only 5 days old vehicle! Hope it goes well, if you have any tips tricks, share. Also, what you think having it for 3 years now? You like it or it's an inconvenience ?

Why’d you decide on feeding the cable through grill rather than air inlets?

Is there a set measurement for how the hood pins should go on the hood?

How well do you think this would work with a charger?

The hood is made out of aluminum so it will never rust

Use a stepped drill, works better and not as aggressive as a hole saw.

I'm glad I watched this. I will not do this.

i want them so bad but i’m just not ready to drill into my hood

you were blocking how cable went in

I'll have to wait there is no touch up paint for My challenger yet it's the Sinamon stick color won't be out till next year

This mod is only a good thing if you are trying to get your steps in. If the hood release was external, then it would be fine. Otherwise, just time consuming.

Looking at a 2011 or 2012 challenger atm, wish they weren't so expensive used lol mustangs way cheaper

Bro. Not gonna lie here. The massive gringe seeing that hood being drilled. Been thinking about doing the same on my 2020 Challanger Scat Pack 392 Hemi.