New RIDGID Max Output Reciprocating Saw Better Than Octane and Gen5X? Your questions answered HERE! 

Finally someone makes tool review videos without all the home shopping club bullshit drama talk like VCG does.

The upcoming tool duels are going to be great. No pilot holes just blew me away. 👏👏👏👏

That quick release is SO NICE no more reaching inside and cutting your hands!

I have this saw, I use it with the 4 ah regular batteries and the tool doesn't bog down but I do use the Diablo 12" 3 tpi blades that cost 3 for $32, used it to cut a tree stump with continuous full power and the 4 ah battery lasts 25 minutes, I have 4 4ah batteries and it took 2.75 batteries to finish the job. The saw warmed up but it did not stop working, love it. The previous day I had used the saw to cut branches on a 30+ foot tree, with one 4 ah battery did 50+ cuts sizes 1" to 3" on the tree branches no problem still had power left on the battery. I would suggest that you buy the 6 ah max output batteries for this saw because it is very power hungry and to also get the best blades, don't cheap out on blades, the blades do the cutting, get the best blades Diablo carbide 50x "longer life".

Tks for not being like all the others. Never stop the silliness!

i have this saw. was using with 4ah batts, bought a pair of 6 max. gonna use those tomorrow. very excited because i love using this dang thing

I'm hoping they upgrade the small vac to brushless. If they could make the 9gallon smaller, more portable, keep similar cfm, improve runtime, and keep the price low.

Ok gotta see the new circ saw and put it up against the flexvolt. After buying the flexy circ my gen5 just sits in trailer all lonely and in isolation

I was listening to this as background noise fully intending to forget it and move on. Then you said, “What is this, VGC Construction?” Liked, commented, subscribed 😂

Good news brother, I like your enthusiasm about the new ridged tools it makes me want to go out buy some of the new ridgid tools

Nice Reciprocate saw love it, powerful and a new look, thanks ToolReview for your information and video, I appreciate you brother

Looking forward to the new tool duels haven't seen them in like ages @ToolReviewZone

@Tool Review Zone When are you gonna do a review on the ridgid 18v framing nailers? I need that!

But is it better than the Kobalt XTR from Lowes?

Good video Clint Brother hope you doing well @ToolReviewZone

Seems beastly! Can’t wait to see the long term

When Ridgid releases tools they need to improve they're combo kits over the other tool companies. A lot of the time I will not buy or I will go partners with someone because some of the tools in combo kits are useless and I believe it would be better if you could always build your own combo kit because I know I would spend more if I could build my own combo kit.

Rigid the first power tools I bought out of high school for the money worth it!! Red fan boy here but you cant knock these tools its like the missing link between professional and weekend warrior tools

Hey TRZ can you do the comparison video between the octane, milwaukee supersawzall, kobalt xtr with this new model. I'm definitely curious between these.

Good afternoon brother what's up, Ridgid Tools are really putting everything into the circle of tool brands and that's only better for the consumer because For the Longest Time Milwaukee and DeWalt were the go too for the professional but with these other tool companies improving their brands it's better for the consumer. The more competition the better the prices you're going to pay for the tools and that's great. Vince did a video on new tools Ridgid is releasing it's basically your past videos in one. Have a good day brother 👍👊

Give me! I just have to get one now.

Yo Clint! I'm a couple days late on this vid. 1 1/4" stroke length? I was under the impression of a 1 1/2" stroke. My mistake. Where's the spm speed dial? Oh wait... ahem! No pilot holes. 🤣🤣 Nice touch. Take care and God be with you. 😁👍P.S. I just KNEW you'd get back at VCG for the Ryobi auger mishap! 🤣💯

Rigid and ryobi ho one + are one of my favorite ones so as Milwaukee, dewalt, makita

Hey Clint - have you done the new Ridgid recip vs the Milwaukee Super Sawzall or Milwaukee Gen 2 sawzall? I’m curious to know how the Ridgid holds up. I’m looking at getting a new recip saw and I’m in both platforms.

Now I know why the orbital position, never even googled it Thanks good content 🍻

After about a month of use my adjustable show broke off. It's now difficult to adjust the blade guide. Also the black cover plate up front has fallen off. It didn't affect permanence, but looks bad now.

What is the difference in the fuego corded one and this one? Besides the obvious...

Thanks for the video bro you it was awesome 😎 to see it in action and your rite a higher ah batteries will make that reciprocating saw work and it's peak performance

I have to buy a battery powered recip saw tomorrow actually. Already have red lithium so it a no brainer for the super sawzall. Again love the sense of humor!! 🤣🤘🏻

Looks identical to the M18 FUEL Gen 1 SAWZALL that I have, except for the orbital action. Great recip! Thanks Clint...you’re a beast cuz 👍

Exactly like Makita's 40v recip saw same look same hook shoe and chuck (Makita in orange)

My opinion??? WOW!!!!

I know a lot of people like the adjustable foot. But not me I prefer the fixed shoe on my dewalt sawzall.

I just brought this. What blades can I but for this? I'm new in using this

Extremely close to a M18 fuel gen 1 other then the orbital mode is it not?

Let’s see that one vs the 4x saw side by side

and which is the most powerful now the octane or the Max output

are the new max output batteries available for purchase now?

Need to record a soundtrack

I’m happy whit riding

Practically, do you see anyone using the non-orbital? 99% of the time, this tool is used for demo so the cleanness of the cuts don't really matter. It also seems like there isn't much difference in cleanness between the two either.

What is the model number

Anything new work good mine Milwaukee still working great internal parts cheap material

The question I haven't seen answered yet is does the new max output batteries have the extra power tab similar to the octane batteries?

This new ridgid recip saw looks just like the new Milwaukee fuel Including the outer blade release interesting 🤔 @ToolReviewZone

I look forward to the new videos now. Rigid? Eh, not so much. But whatever, I’m watching and I’m entertained.

why the hate on vcg?

Nice saw. I got Ryobi actual 1375 SPM 1.25 but no orbital. I paid $65 shipped. No thanks Mr. Orbital. Doesnt orbital wear blade out faster? Am i th onlyq from planet earth? Orbit & non orbit test and no mention which is faster? Maybe i missed it? I watched vid twice? Did i miss it twice. Any humans outhere? Hello?.

Question does any of these tool companies have any high speed cameras that can slow down and backup the claims on 3200 or 3000 Strokes per minute because how do we know that's true or not and they're basing that off a fully charged battery what happens when the battery loses charge what does The Strokes drop down to because that might be a deal-breaker where they're trying to now save as much power as possible and that's why sometimes it takes forever to cut through wood something to think about

That is real nasssss like! 👏🏽🙌🏽💪🏽 Smeeesh that like button.👀👉🏽 👍🏽

Also don't speed up the cuts it helps to judge the time better

I like, send one over...

is it lighter wght wit 4amp batt thn milwaukee gen 2 recip wit HO 3amp

Nice 😎

I undecided right now if not I’ll let LSA do it’s thing and get this upgrade once my octane Recip saw gives out

All these look like older gen M18 tools. Nothing wrong with that I suppose

Max output vs octane video???????

At no load Ridgid has more 200 strokes than Milwaukee, but with load, Ridgid can have lesser power slowing its spm. Maybe I'm wrong, we'll see on the duel

Nice.... Shots fired! Vcg?

liked mocking at vcg construction.hahahahahahaha

Dust got inside eating the gear:(

Low blow to VCG

Still waiting on the comparison 1 year later literally 😒 lol

When you suggest that your intent is to let the saw do the work, then you start rocking it up/down, to and fro...you do not make sense. If you say it, then do it, let the saw do all the work, no wrist or arm English.

Seems like an orange Milwaukee

Why do you hate VCG? Yeah, he's annoying, but what's the overall beef?

Ok so I have one of these if your not careful it has enough power to knock a 300lb man off a ladder lmao Compared to the octane this one is just mean

Vcg

Looks alot less impressive than the Octane model was.

Vcg.... Iol

😆🍻🍺😊

Over rated

Piece of junk cut branches it will destroy the inside gear Milwaukee is the best even a cheap one

Please don’t buy this pice of junk

that thing stinks. glad I stay away from their tools.