actually, i didn’t realize that the internal solution hose comes out of the vac hose using that cuff. that makes it a little trickier. you’ll need a hide-a-hose adaptor cuff. you would then trim about 12” section off the end of the shear dry vac hose, attach the adaptor cuff and run your internal solution hose through that, and then reattach that 12” section of vac hose and then attach the mytee cuff lynx to the end of that section, which would then thread onto the connection port of your mytee 8070 unit. hope that makes sense and i was able to help. here’s a link to the adaptor cuff part i mentioned: www.cleanservinc.com/accessories/hoses-hose-accessories/vacuum-hose-cuff-hide-a-hose-15-inch-threaded.html
This is a very bad product, almost all parts broke after 6 months of use. In the same mode, we use Prochem Sapphire SS679 and everything is fine so far.
Mine is broken as well , the clear casing is cracked and causes a vacuum leak, and it's also cracked right where the tiny solution fitting threads into the plastic casing and doesn't spray any pressure . It just dribbles a massive mess. Having a tiny threaded fitting thread into plastic is extremely stupid and rediculous from a engineering standpoint.