NEW Trailer Setup! | Can We Fit 4 UTV's?

Подписаться 27 тыс.

Просмотров 40 тыс.

50% 1

Link to air compressor in video:
www.amazon.com/Compressor-Off...
We bought a new trailer! 36' two car hauler bumper pull trailer rated for 14k pounds. lets see if we can fit four utv / sxs on it!?
Merch: teespring.com/stores/blownbud...
Subscribe for more here:
ru-vid.com...
For business Inquires:
Blownbudgetoffroad@hotmail.com
Machine details:
Justins machine is a 2019 Can-am X3 XRS. It is 72" wide and 172 horsepower. Suspension is setup to the fox tune with some additional ride height added. It is running 32x14x10 sticky Maxxis Roxxzilla tires on 14x7 Alba Crusher Beadlock Wheels with a 5+2 Offset. It has a Evo Powersports Shocker cat delete exhaust, Gear grabber shifter, Front limit straps from sandcraft. Warn Axon 55s with super atv front winch bumper. Super atv high clearance trailing arms, L&W Fab rear High clearance billet radius rods, CT Raceworx front end gusset kit, tie rods w bump steer delete and high clearance lower A arms. It has SuperATV Trailing arms, still running stock axles with the factory smart lok front diff, also running a Razor Sharp Customs Cage.
Billys machine is a 2020 Polaris RZR Turbo S Dynamix. It has a Trinity racing exhaust and tune, L&W Seat Lowering Bases, BS Sand Seats, Gear Grabber Gated Shifter, Trail Armor Full Skid Plates, Full Orb Suspension with 2" stretch, 32" Maxxis Roxxzilla tires mounted on KMC 15x6 wheels with a 5+1 offset, and Super ATV X300 300M Axles all the way around, KB3 Driveshaft, 33% Gear reduction in low, Skinny Pedal Fab Bed Delete with Razor Sharp Customs Cage
Joshs rig is a 2021 Polaris RZR Turbo S Velocity. It has L&W Fab Seat lowering bases, stock seats customized for a lower seating postion, gutted stock exhaust, skid plates, 32" Coyote tires on aftermarket beadlock wheels, Trinity Blow Off Valve, Full doors and i think thats it for now!
#offroad #towrig #ford

Авто/Мото

Опубликовано:

8 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@_DB.COOPER Год назад

I can hear the Farmers Insurance theme playing in the background “We know a thing or two because we’ve seen a thing or two”.

@jeffsgarage8414 Год назад

The two razors will stack better on top of each other because they are the same width, then canam, and stack the Talon on the Can-Am. Talon in the back cause if it falls off who cares! 😂

@Pickleoffroad Год назад

Put a ramp on the truck then you can fit five by a four-door turbo S and build it out next

@tubbymorgan9400 Год назад

Definitely wanna try and load machines a couple different ways. Never know what might happen. Loose a wheel on one etc. Broke both axles on my xp and took a winch plus 4 people to get it loaded back up on thr neck of my gooseneck so we could still fit the other two 4 seat machines. Unfortunately every thing only fit one way with the way we designed it so we couldn't move machines around.

@ramonruybal9808 Год назад

Great video , looks like u guys having fun ,that's the best

@ebytrio5057 Год назад

You guys are the best. Love your videos.

@stacyreid5077 Год назад

I had a 16’ old car trailer and was needing to haul 2 SXSs ( my Commander and a RZR so we added 1-1/2 feet to it and was still short by 2ft so I took a old heavy duty built LWB truck bed tool rack that goes up behind the cab ( lazy L ) and widened it to fit trailer then added to the top section a place that the tires would sit with a bump stop and the some removable ramps to run up on which left tons of space underneath it and room for the RZR

@jamesschwartz2503 Год назад

That is a great idea. Let us know how it pulls. Good straps would be worth the insurance!

@markmanning6773 Год назад

That’ll work. Consider fabricating some ramps that cradle over the tire that you can leave it in place while raising it up a couple inches.

@Hondarider35 Год назад

Need etrack ,then straps over tires.

@KnownSender1 Год назад

Great video yall

@705on8 Год назад

Looks good to me!

@calebbarbour3085 Год назад

Throw a chain from side to side on the trailer hook winch to that and suck the front ends down . Also could use the stake pockets to fab up a bridge from side to side to let the ramps rest on. And take the hassle away from tire stacking.

@chanzsmothers9447 Год назад

Bet that air compressor works a lot better than my little air hawk did at hawk pride 🤣🤣

@OffroadTakeover8 Год назад

Sketchy Bois🤣🥊

@MrMd5555 Год назад

Nice job! That's gonna get old after a few trips, especially coming home when you're whooped

@joshkuennen5275 Год назад

looks like it might work better if talon was backed on first and drive rzr up on it. might make it easier next time

@fncrazy101 Год назад

Sweet!!!!

@Rattlecanjeff Год назад

We built ramps over the front and haul two Turbos Ss on a 18ft car hauler and I thought that was sketchy!

@willieramirez4586 5 месяцев назад

Any videos on it? I need to extended my trailer a couple of feet and I’m trying to figure out if it’s do able in a safe way.

@Rattlecanjeff 5 месяцев назад

@@willieramirez4586 only extended mine about one foot. Two foot would get into your tow vehicle in a turn.

@Baylee191 Год назад

That’s awesome you guys need to come to Indian mountain and make a video

@kylejackson2823 Год назад

You guys better get Speedstrap as a sponsor.....SOON!

@JokerJeep Год назад

Sorry guys ,I guess I am too conservative, no way would I go very far with that set up.

@rongilmore8755 Год назад

SEND IT!

@stgraves260 Год назад

If you have to struggle that much to get 4 Units on a trailer than I definitely wouldn’t do it myself. Wouldn’t feel safe towing it. If anything add a rack in the back of your F350 to carry a SxS. 3 on the trailer then one on the truck. Depending on what options you have on your tuck has up to a 7K payload on a 2022 Ford F350. Just another option. Stay safe. Enjoy your videos.

@c_lee_films5530 Год назад

Put monster ramps for a gooseneck on the back amd gain more deck space

@adamdixon8764 Год назад

only concern i would have is if you cook one machine can you still stack them? either way better setup then me lol

@Ohioturbos Год назад

Just seen there is a Nitto factory in Piqua, Ohio. Do the grapplers say made in the USA?

@Eccentric5B Год назад

That's not sketchy at all.....😄

@brokesxs2547 Год назад

Nice

@davidcason2668 Год назад

For what you guys are trying to do you should ratchet strap your front shocks down that way you can drive the other vehicle up over the top of the other vehicle much simpler you won't hit then because your front end is Rochester down then with the other one put your tires to the one side either or and then you can drive the other one up that way the tires are touching the front upper and lower control arms instead of tired to Tire you'll get more room food for thought

@tylerronto5454 Год назад

Should of ratchet strapped the buggy on the bottom first, cuz it would of dropped the suspension then drove up on top of tires for the clearance

@jpmesser4300 Год назад

I see people doing this but I wonder what happens when one goes down and won’t drive on top of the other

@stgraves260 Год назад

I see people do this as well. I’ve also seen these SxS fall off of a setup like that. There is much safer ways to haul things down the street. There are other people on the road and not just the one hauling. When this thing tips, not if, but when it tips, it is a nightmare. I’ve seen people jump off the mountains of the Grand Canyon. People fall off the water falls of niagara Falls in a barrel, and swim with sharks. That doesn’t mean I want to do it. LoL!!