Next Level 3D Printing - Review of the Creality Halot-Mage 8K 3D Resin Printer

Подписаться 58 тыс.

Просмотров 27 тыс.

50% 1

In this video, I unbox and review the All-New Halot Mage Resin 8k 3D Printer from Creality, a cutting-edge technology that promises to take 3D printing to the next level. I'll explore the printer's design, features, and performance, testing its capabilities with various models and materials. Join me as I share my honest opinions and experience with this revolutionary printer, and find out if it lives up to the hype as a game-changer in the world of 3D printing.
#creality #creality3d #halot-mage #3dprinting #3d #3dprinter #unboxingvideo #unboxing #review #technology #tech
◽️◽️◽️◽️◽️◽️
ADD ME ON...
INSTAGRAM: @clohofficial ► / clohofficial
TWITTER: @clohofficial ► / clohofficial
PATREON: / chrisloh
BLOG: clohofficial.com/
-----------
Video Gear I use:
📷 Sony a7iii - amzn.to/3CDzTJg
📷 Canon D80 - amzn.to/3bDkIOX
Audio Gear I use:
🎙️ Rode Wireless Go - amzn.to/3fXbX5S
🎙️ Samson G Track Pro - amzn.to/2WBF7Q6
🎙️ FiFine Wireless Microphone System - amzn.to/2zFIsoq
🎙️ FiFine K678 Microphone - www.amazon.com/dp/B085WRN1VD?
Lighting Gear I use:
Graphy StudioFX Box Lights - amzn.to/3cFfmnR
Neewer Studio Lighting - amzn.to/3bAYFs7
All Equipment and Editing Equipment that I use:
kit.co/clohoffical/my-filming
-----------
Music Track by:
Main: From RU-vid Library
-----------
⬇️ WATCH MORE VIDEOS ⬇️
/ cloh761
/ @everyday-unboxing

Наука

Опубликовано:

7 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 60

@jakematthews4781 Год назад

Dipping the print in hot water is the best way to soften up the supports, they just peel off when you do that!

@ricardoperez-vasquez Год назад

thank you!!!

@SpuerEliteEight Год назад

My favorite youtuber someone who actually thinks about practicality and gives brute opinions man love it

@andymc8355 Год назад

Top effort for filming your first go at 3D resin printing without knowing how it was going to turn out. Thumbs up from me

@onacona47 Год назад

I really liked this review especially as someone who was thinking about upgrading to this machine, a couple of things that I have learned from my time with resin printers 1) replace their generic USB, almost every company sends a low quality USB that can cause problems later 2) any sheet of letter or A4 paper can be used for calibration 3) I always use a calibration matrix when I get a new resin type, different colors and brands need different settings to look their best, I recommend the calibration matrix V2, and just use a sharpie to write the settings used on it. Might decrease the time or increase the time to really hone in exposure time. 4) I always try to have the most detailed part of a model at the top, it holds the detail the best, usually that's the top of a model anyways but not always. Best of luck, I really enjoyed this review.

@ChrisLoh Год назад

Excellent. Thanks. These are really helpful for someone new like me. Where can i find the calibration matrix V2?

@guilhermecarvalhotrindade2625 Год назад

After removing the print from the build plate, use a hair dryer or heat gun on the supports to remove them easily. Heat makes resin really soft! For future reviews, please consider what software or slicers can be used with each printer. The more different slicers you can use, the better -- the more locked down the printer and the software are, the worse.

@ChrisLoh Год назад

Thanks for the Tip! Both of them actually. I'll definitely use them for future review videos and prints.

@nps-ddpsavinglives 11 месяцев назад

Well done nice review !!

@defusemani Год назад

Since you are new to Resin printing. here is a pro tip: use a heat gun to heat up the finished print to make support removal easy

@ChrisLoh Год назад

Thanks for the tip. Definitely helpful!

@electricamish 5 месяцев назад

Grab yourself a UV flashlight , then take a brush and dip some of that resin onto the broken part, hold the UV light up to it as you hold it in place , and sometimes you can get a pretty decent repair for those broken pieces

@geraldwolfe1778 Год назад

I did not have the calibration paper with mine, just used a piece of paper. Even with the filter, you still can still smell the resin unless you can pipe that out of the room. My biggest concern with this printer is that you have to use Halot Box software to slice your prints. The software is extremely buggy and prone to freeze up or close out. You can use Chitubox to hollow out prints and add supports then save and open in Halot Box to slice, but it just adds extra steps to the entire process. Print quality is good. I had a power flicker and the printer does not appear to have an option to recover printing. Overall it is a nice printer with very good quality prints, but some basic fixes would make it much nicer. This was also my first resin printer and honestly I wish I had gone with a different printer that didn't have some of the issues this one has like a standard file format for other slicers and a print recovery option.

@mariarzyt_3D Год назад

Chitubox and Lychee will eventually catch up on support, because those softwares were promised to be able to support this printer. I've read a bit about this and apparently Creality somehow managed to release the printer way too early and too cheap (40% instead of $40 less for a few days in US lol). The slicer software producers didn't really know about this printer. But they're working on it. I guess we'll have to wait

@joanmichiels111 9 месяцев назад

I'm having a problem with the software. When I put more than one model on the plate, slice and save it is only saving one model. What am I doing wrong? I select all before slicing but nothing.

@idkstudios3768 6 месяцев назад

Uhhhhhhh. I just bought this and thought it was relatively small. I I mean, I'm not complaining. I'm just surprised how good a price i got.

@leizorkei Год назад

I have couple of doubt/questions: did you need to add more resin to the vat? Or there was resin left after it was finished? What did you do in any of those cases?

@ChrisLoh Год назад

I didn’t need to add more resin for the print in the video. I actually had a pretty good amount left that I put back in the bottle

@rodrigolopezarechiga6557 Год назад

You can leave the resin there for months, no worry about it.

@moodyswings9812 Год назад

You forgot the close up

@Grom84 6 месяцев назад

Sooo does it holds up after half of a year?

@3DRundown Год назад

Hello fellow youtuber. Doing a video on my Pro. My resin vat is WHITE, rather than clear like yours. Did you remove film, off camera?

@ChrisLoh Год назад

Nope. Mine didn't have a film. It could be different for the Pro model though. I will have my Pro model in a couple of days and can let you know though

@M4r11on 8 месяцев назад

that almost white vat film is normal.

@otaku521 Год назад

since you have a bambu lab... why not do a compare between this vs FDM bambu lab ? and maybe also do a acetone vapor smoothing is it a real resin can do all

@ChrisLoh Год назад

Thanks for the recommendation. I was actually planning to do a Benchy comparison. I just wanted to make sure i got more experience with the Resin printer first. Coming Soon.

@ArxCruz Год назад

One of the things that caught my attention is the filter, I wonder how is the smell in your room, I give up resin printer because of the smell of it. Having an embedded filter system might worth if there is no smell.

@ChrisLoh Год назад

It helps a lot. I only had an oder initially, but i think it was that new printer smell. In my latest prints, I dont smell anything, but it also means you probably have to make sure you replace the filter regularly

@Mateo906 Год назад

I also have this printer and i can still smell it strongly, just use the pipe to get the odors out of the room, they really are toxic!

@dragonshoarddesign3094 Год назад

I just got my halot mage the calibration card is missing where can I get one

@ChrisLoh Год назад

It is the piece of paper with a barcode on it

@dragonshoarddesign3094 Год назад

@@ChrisLoh it was not in the box

@ChrisLoh Год назад

@@dragonshoarddesign3094 really. That is strange. I can scan a copy of mine and send it to you. It is literally just a piece of paper with a barcode on it. I’m not even sure if the barcode is needed

@dragonshoarddesign3094 Год назад

@@ChrisLoh I just used a piece of paper

@outsidestuff5283 Год назад

Yeah I didn't get the calibration card with mine either but a regular piece of paper worked ok

@ttzombie Год назад

WHICH ONE ?? Anycubic M5s - or - Creality Halot-Mage Pro - or - Elegoo Saturn 8k - or - ?????? ................ There are great options out there so which one??? Anycubic 12K & Auto leveling is impressive . Creality Halot-Mage pro has a autofill, tilt lid.

@kevorkouzounian5801 Год назад

Are this machine suitable to making jewelery with wax resine

@rodrigolopezarechiga6557 Год назад

yes!

@MikeHammer1 10 месяцев назад

FYI, it's not Styrofoam, it is expanded polypropylene foam. Much stronger, shock absorbing and resists permanent compression.

@ChrisLoh 10 месяцев назад

Thanks! Didn't know what it was called.

@DS-pk4eh 4 месяца назад

I thought that this non Pro model does not have Wifi?

@Garettalong Год назад

Not to be a downer but the specs you were isting off are for the Halot Mage Pro not the Mage

@ChrisLoh Год назад

Thanks for the heads up. Which specs were not accurate? They both have pretty much the same specs with the exception of the following: 170mm/h on the Pro vs 100mm/h The Resin Pump on the Pro Higher Light intensity on the Pro

@daking1879 Год назад

@@ChrisLoh normal mage prints at Max 40mm/h for example, worst screen

@Kenny-jg8ld Год назад

No wonder it 19hrs for that relatively smallish print

@Niinjashorts 6 дней назад

How do you get new files onto your machine it doesnt have wifi

@jiasios 4 месяца назад

Is it a review or a self-learning video of how it works?? You are more ignorant than me who don't have any printer at all. LOL!

@rodrigolopezarechiga6557 Год назад

You only need to cure for like 10 minutes or they will get really brittle.

@evlnachoz9814 11 месяцев назад

lol its $1000 in NZ

@devil_samuraix6176 8 месяцев назад

the smell bad? i wish to get resin but house too small affair smell too toxin

@foam27 Год назад

This is NOT 12x faster than most available printers, at 40mm per hour it's one THE slowest printers available. The Halot Mage PRO 8k does 170 mm per hour. That is the one your referring to, but it's not the one your are reviewing, lol. If you are going to do paid shill reviews at least make sure you are giving the correct info for the model you are reviewing.

@rayghassimi4363 Год назад

First resin printer but acting like a sale's person. For people who are first time resin printer's this is a very misinformed person to watch

@ChrisLoh Год назад

This is not Creality's first Resin Printer. They have a few. I also clearly state that this is my first experience with a Resin printer and am definitely not anywhere near an expert.

@rayghassimi4363 Год назад

@@ChrisLoh i never said it was their first resin printer. I've had the ld-002 , ld-006, halot one , halot lite and know have the halot mage 8k and many other printers like voxelab proxima 6 4k and the flashforge 8.9 4k and phrozen 8k mega so you did not clearly read what i wrote and further more What you were showing verse what you were doing made you seem like a sales person with no real knowledge of what you are doing

@rayghassimi4363 Год назад

@@ChrisLoh your first resin printer not creality my guy

@andymc8355 Год назад

All credit to you Chris for having the guts to film your first experience without knowing how it was to turn out. Your video sure lets other people know what to expect. Well done regardless Don't listen to the Knockers

@rayghassimi4363 Год назад

@@andymc8355 blah blah blah . like i said the sales pitch sales man attitude was what i was referring to