Тёмный

Nez0's Bad Shoppe: Yokomo MD 1.0 "Master Drift" Purple Limited Edition Constructor's Digest 

Nez0's Bad Shoppe
Подписаться 4,6 тыс.
Просмотров 3,7 тыс.
50% 1

Tips, infos, tricks and other notes along the journey of the building and completion of a RC car kit brought to you by Nez0 :D This build took my twice as long as normal but only because I wanted to be very very sure about which supplement installation instructions to use as there was a multi page booklet of supplements along with a single sheet that was on top of everything inside the box. The build went good though overall. I did find one part that was different than the manual and supplements showed. The car does look nice in purple so I'm happy about that. The camera I typical use died about 1 hour and 2 min into the video...right near the end lol. Expecting good results for the out of box shakedown which should be ready in a day or two :) All of the parts were in my kit box, none were missing. I will be scanning the manual supplement booklet and the single supplement sheet into PDFs and if you need them or would like them please comment. These tips and infos should help you on your building process. Get your tools, snacks, drinks ready and let's start building! Happy building :D Enjoy the video! :D

Развлечения

Опубликовано:

 

19 май 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 33   
@sammygonzalez7627
@sammygonzalez7627 7 месяцев назад
Good job, showing illustrations. And most importantly pay attention to details ✌️
@BadShoppe
@BadShoppe 6 месяцев назад
Thank you for watching! :D
@carlsenesbjerg
@carlsenesbjerg Месяц назад
Amacing
@ock105
@ock105 Год назад
I've been studying these videos the last few days, purple kit should be here in a few hours. Thank You for this👌🏽
@BadShoppe
@BadShoppe Год назад
Aww yiss, you are welcome! Happy building!
@idealautofactory
@idealautofactory 6 месяцев назад
Thanks for the video
@Reelin4mentalhealth
@Reelin4mentalhealth 9 месяцев назад
I was missing two spacers still built my Red version in just over 4hrs!! Your videos rock Nezo love your work 😎🤘🏻
@BadShoppe
@BadShoppe 6 месяцев назад
Hello! Thank you for watching! :D Mine was missing spacers as well lol
@WNYRC
@WNYRC 7 месяцев назад
Thabks for all you do. Just south of you near Buffalo NY and have the MD 1.0 and watched this multiple times. Would love to know what tunes you did to get it more aggressive and alive. I've started to tune away a bit but it's coming along slowly.
@BadShoppe
@BadShoppe 6 месяцев назад
So far i haven't done much but in 2024 im planning to work on it more :D
@mattbrc
@mattbrc Год назад
This was super helpful. Just ordered my purple version and am glad I watched this first. otherwise, I would have totally lost with all the supplements. Looking forward to seeing you testing the chassis and any tuning tips.👍
@BadShoppe
@BadShoppe Год назад
Heck yiss :D Glad to be of help! The purple MD 1.0 is a monster, instant love on first lap of drifting! Shakedown video is live now :D
@ocdriftil3269
@ocdriftil3269 Год назад
👍👍👍
@grski900000000000000
@grski900000000000000 Год назад
As regards the Body Posts , I used MST RMX body posts instead / You don't need to cut them at the bottom and they have more position options with 2 cups being in the set / a tall set and a short set , Much stronger and stiffer than the Yokomo Body Posts as they look neater (won't have cut edges sticking out) and have a small screw to secure the cups / check em out , You'll need two sets though as you need front posts on the front and rear / if you leave 8-10 holes in the MST posts on the rear You can fit most S chassis bodies / Hope this helps :)
@BadShoppe
@BadShoppe Год назад
0o0o0o0o0o very interesting! I'll give that shot :D
@grski900000000000000
@grski900000000000000 Год назад
The Upper Arm Mount in my MD 1.0 Kit also only has 2 holes , and mine are mounted on the inside , ill move them out , TY Nez0
@BadShoppe
@BadShoppe Год назад
Very welcome :D
@wavtype
@wavtype 11 месяцев назад
Any recommendations for whether to build this with a 3 gear or 4 gear transmission for use on a concrete track (assuming it comes with both)? Also, is the pinion very dependent on electronics or is that something that you can also recommend? thanks in advance :)
@BadShoppe
@BadShoppe 11 месяцев назад
Go 4 gear transmission :D Pinion is not super dependent on the electronics, just need to select withing the right range so as to not damage or over stress your electronics or put the Final Drive Ratio out of whack. I choose I 20 tooth pinion i believe but 20-24 should be fine for concrete :D
@jacobquezada8918
@jacobquezada8918 9 месяцев назад
In you experience what would be the best drift car? I’m trying to get one and don’t know much about them but I was really interested in the md 1.0. Do u have any preferences or recommendations?
@BadShoppe
@BadShoppe 6 месяцев назад
Well best car is subjective as there are so many and anything is possible with tuning. I have some favourites from this year: Reve-D RDX, Yokomo MD 1.0 v1.2, Yokomo SD 2.0 to name a few
@jerrybowling8683
@jerrybowling8683 8 месяцев назад
Did you make a PDF yet of the Books?
@BadShoppe
@BadShoppe 6 месяцев назад
Yes i have the PDF's created, sending mostly through Facebook
@jonjarantilla8831
@jonjarantilla8831 Год назад
Pls share supplement manuals v1.1 and v1.2 thanks
@BadShoppe
@BadShoppe Год назад
Yes I am uploading them to the Yokomo MD 1.0 facebook group but can also send directly to an email.
@michaelrc9098
@michaelrc9098 Год назад
Are these newish MD kits any good for carpet do we know?
@BadShoppe
@BadShoppe Год назад
Well I love mine on polished concrete. I am confident the v1.2 out of box tune will work great on carpet as well, just pair it with the right tires for your surface :D
@jacetalon_2283
@jacetalon_2283 Год назад
have any problems with the sliderack being loose??
@BadShoppe
@BadShoppe Год назад
After a few runs I needed to re-adjust the front cam on the slide rack. This is typical of even the YD-2's slide racks as well.
@ock105
@ock105 Год назад
well my build has stopped at page 2.....seems like my idler shafts weren't tapped properly, screws wont reach threads
@BadShoppe
@BadShoppe Год назад
:o :o :o oh nooooo! That is a massive bummer! Contact your local dealer or Yokomo!
@mattosmond4265
@mattosmond4265 Год назад
MD 1.0 vs. Reve-D MC-1?
@BadShoppe
@BadShoppe Год назад
Well the v1.2 MD 1.0 Purple is a monster out of the box, i must tune it now to see if it can make me feel how my MC-1 makes me feel :D
Далее
Nez0's Bad Shoppe: Yokomo MD 1.0 Constructor's Digest
43:32
Joy and Anxiety Mood (Inside Out Animation)
00:13
Просмотров 1,1 млн
$6000 in WEIGHT SHIFT CHASSIS (Drift Log #13)
12:32
Просмотров 1 тыс.
$30 vs $3000 RC Car
14:13
Просмотров 6 млн
МИША ПЛИТОЧНИК
0:19
Просмотров 4,9 млн