visit: www.stevemeadedesigns.com/board - Join our fun, friendly and knowledgeable community today!
About my amps:
The A1500.2 is a True Dual Mono Design providing better stereo separation and imaging as compared to traditional stereo amplifiers - the chassis being the only thing common between channels. In an effort to provide the very best signal to noise ratio and lowest distortion possible, 109 dB (A-weighted) and 0.027% THD+N the amplifier utilizes a Mirror Image Design with positive and negative output signals of each channel generated using identically mirrored circuitry. Each of the two channels is also a mirror image of the other. A1500.2 operates the current amplifier devices in class A/B operation and the voltage amplifier devices in pure balanced Class A mode offering a realism and truth to the source never before available from a mobile power amplifier.
From a design standpoint, the A1500.2 utilizes separate PCBs for the voltage amplification stage and current amplification stage to maximize the signal to noise ratio so that it's dead silent. It has been designed from the ground up around the highest quality components available at any cost, including; Nichicon Fine Gold™ capacitors, Nichicon Muse™ audio capacitors, (14) On-Semiconductor complementary bipolar junction transistors per channel, and non-inductive resistors, all assembled on 4-layer heavy copper PCBs! Its dual mono channels can be wired as a single channel with double the output voltage for applications where high power is required. Finally, it includes a pair of gorgeous LED output meters to indicate actual amplifier power for each channel as well being used for self diagnostics in a fault condition.
The A1500.4 is a True Dual Stereo Design providing better stereo separation and imaging as compared to traditional stereo amplifiers - the chassis being the only thing common between channels. In an effort to provide the very best signal to noise ratio and lowest distortion possible, 109 dB (A-weighted) and 0.027% THD+N the amplifier utilizes a Mirror Image Design with positive and negative output signals of each channel generated using identically mirrored circuitry. Each of the two channels is also a mirror image of the other. A1500.4 operates the current amplifier devices in class A/B operation and the voltage amplifier devices in pure balanced Class A mode offering a realism and truth to the source never before available from a mobile power amplifier.
From a design standpoint, the A1500.4 utilizes separate PCBs for the voltage amplification stage (and each of the 4 channels has its own) and current amplification stage to maximize the signal to noise ratio so that it's dead silent. It has been designed from the ground up around the highest quality components available at any cost, including; Nichicon Fine Gold™ capacitors, Nichicon Muse™ audio capacitors, (8) On-Semiconductor complementary bipolar junction transistors per output section per channel, Burr Brown Op-amp and non-inductive resistors, all assembled on 4-layer heavy copper PCBs! Its dual stereo channels can be wired as two single channels with double the output voltage for applications where high power is required. Finally, it includes two pair of gorgeous LED output meters to indicate actual amplifier power for each of the 4 channels as well being used for self diagnostics during a fault condition.
More info on these amps here: damoreengineering.com/
Need a high output alternator? visit www.mechman.com
XS Power Batteries and info on them can be found here: www.4xspower.com
Get Second Skin’s #1 Sound Deadener here
www.secondskinaudio.com
SMD Products can be found at www.wcCarAudio.com , Amazon, Ebay and more!
#DAmoreEngineering #caraudio #Amplifiers
Support these videos here! / meade916
Also, check out my other pages:
Instagram: / meade916
Facebook Page here:
/ smd-steve-me. .
Follow: / meade916
Visit Sonic Electronix at www.sonicelectronix.com
8 янв 2021
