Nikola Tesla's Single Wire Power Transmission, Part II: Carbon Fiber Thread, Radiant Energy, Diodes 

If anybody wants to see more about specs & precise details, look here: open-source-energy.org/?topic=3676

Those fly lead experiments are IMO proof that the purpose of the top capacitance in SWT circuits is to create standing waves along the circuit and within the load, that's why a top capacitance of a certain value is required, when the waveforms reflect back off it down the line it needs to be at a rate that the result is a standing wave, looks like the same thing Tesla was very excited about in creating standing waves in the Earth's crust. Great video cold3, very valuable information and great experimentation.

Your builds are Beautiful!! I wish mine looked more like yours and not like I dumped pieces of wire , glue and a bunch of semiconductor trash on my desk..lol

Great job . I do my electrinics in our winter time which is about 2 months away so wont be long now till i reappear with sone new videos . Thanks for the demonstration . Very inspiring 👍🏻

Good job and interesting stuff I like that specially the one wire and the note about displacement current wow

Thanks for sharing your experiments. You never know what ideas it may spark in other viewers thoughts.

I recently started learning . and I had this thought about how much energy we waste and this just confirmed exactly my thoughts. Very awesome.

Vary nice :)

Great analysis. Thanks!

Really love those plasma shots at the end✨✨✨!

The dark lines of the wrapped ghost wire from the past on your round fluorescent bulb is way freaking great stuff lol ! Proves my spacecraft laser power drawing technique for warp speed idea ;)

Hey Jim, just wondering about the frequency readings from your oscilloscope into/out of the high voltage line. Would any AC devices have to put up with a much higher frequency since you're not using an active frequency generator...you just used the terms "step up and step down", not paying mind the frequencies

"wow"👍

Nice video. In my 'area' this setup is no longer one wire, we used line to ground system. The Earth acting like a return wire/cable to make a complete circuit. Tried this before but I'm switching to single/one wire technology which totally one wire which doesn't have earth... Although earth is needed in another stages for the whole system to improve performance. But sending energy from the first stage is totally one wired. My system seems physically one wire but still a complete circuit through capacitive coupling via parasitic capacitor.

Single wire is great fun lol!

Great replications, thank you for sharing. Have a look at Prof. Konstantin Meyl who has done 40+ years of research on wireless transmission of electricity based on Nicola Tesla's research. Professor Meyl's even came up with some amazing discoveries in the process himself. He has published a few books and he also made a few PCBs if you want to scientifically read and replicate some of his experiments. I made my own replication twice and can hit resonance frequency each time now.

I’m a Master Ivo fan too :)

Hello, greetings from Argentina, your work is very good, I am working on the same thing but in a different way, I think that as you mentioned Tesla did not use diodes or semiconductors, it occurs to me instead of wanting to rectify the radiant energy it would be good to extract useful energy from another way, perhaps with solar panels or capacitors, then I also find it interesting to use insulating elements for the only cable through which the longitudinal energy can travel equally. greetings

You should lower the duty cycle on the sending coil and compare the results.

Bravo........is it neutral bonded to ground....?.....like to see separate power supplies on each side......ok .....lighting bolt........single wire....cheers

Master Ivo 👍

Important note when used for long distance. It was assumed that ground was the same voltage world around. This proved false. The cause is the earth's magnetic field and the solar wind, which increases with a CME toward earth. The transmission lines for telegraph exhibited voltage to the point the batteries could be disconnected and the telegraph still worked. Longer lines stopped working as the sounders stayed energized and sometimes were overpowered to the point of burning them out. This is why the US electric grid does not contain a DC current path between substations on the HV transmission lines. One end of a transmission line is configured in a Y with the center grounded to discharge static discharge and lightning. The other end is in Delta configuration with no ground so DC on the line can not flow.

what frequency did you use ? is the one wire is coming from the L1 or L4 ?

i dont know exactly what you're trying to show in the videos but i can tell you this, you're basically transmitting high energy RF through an antenna, the plasma inside the bulb is a clear sign of it, im surprised your video equipment/phone isnt freaking out from it

A laser as a conductor? That's awesome! Does it have to ionize the air to do that? Also using water tubes as transmission lines

Are you familiar with Birkeland currents? I wonder if that's what is happening with your carbon fiber wire. Basically a vortex in one direction, on the outside, and a stable flow on the inside...

Try a foil pyramid , possibly another inverted pyramid on top in place if the cube,

Unfortunately, our current electrical system is 3 phase. Try doing that over one wire.

I suggest everyone read Elementary lectures on electric discharges, waves and impulses: and other transients - January 1, 1911 by Charles Proteus Steinmetz

An interesting tidbit with no real use.

I mean that when rectifying, only the electromagnetic part is used but the longitudinal part is wasted, which is why there is such low performance with respect to transmission.

I'm convinced that "radiant energy" was Tesla's term for ionizing radiation. (He got it from his hero William Crookes, who had coined the term "radiant matter," to refer to electron beams (called cathode rays back then.)) Probably Tesla was generating x-rays since well before 1891. But he never happened to wave his hand in front of a fluorescent panel, to see his own bones. So, if we aim an x-ray beam at a metal plate, will the plate become charged? YES! The plate becomes positive. This is a common physics demonstration, although in physics class we use hard ultraviolet light, and a recently-cleaned zinc plate. It's just a demonstration of the photoelectric effect. So in other words, Tesla patented the phototube. But his version didn't have a glass bulb. (And, if we use x-rays instead of UV light, I think it should work much better.) Tesla even did the same as modern phototubes, by coating his plate with liquid mercury. (Today we use melted cesium metal, and others, the multialkali photocathodes.) Also about aluminum-foil forces ...capacitor plates always attract together at high voltage. The polarity doesn't matter. AC or DC both work. So, if you form a capacitor where one plate is a fluorescent tube, the conductive plasma should attract aluminum foil. (Replace the CFL bulb with a bent metal rod, and I bet it still attracts the foil.)

It looks like you are using HV, the aluminum foil is being attracted via static

We are facing many technological singularities in our lives including partial immortality by living in space warp vehicles. With backing I will showcase an Earth Low Atmosphere field levitation, momentum vehicle. Such technology can provide people sleeping rooms where time stops.

there's something about your presentation, maybe it's the equipment or a cadence thing but you don't speak that fast, I don't know. I can barely understand what you're saying. I completely miss every 5th or so word.

Your coils are going to loose energy due to other metals in the area. You need to shield them with Aluminum maybe