Тёмный

Nilight LED Tailgate Strip Lights DIY Installation onto Toyota Tacoma | Mod #57 

Tacoma Mod XELA
Подписаться 3,3 тыс.
Просмотров 12 тыс.
50% 1

This video is a DIY installation of Nilight 48" LED Tailgate Strip Lights onto a 3rd Gen Toyota Tacoma. The video talks about the product, step-by-step installation and product demo after installation.
Product Link:
www.amazon.ca/...
Thanks and until the next video!
Alex (modXELA)
Toyota Tacoma, Nilight LED Tailgate Strip Light
DISCLAIMER
I am not compensated by the companies of the products that I install or the tools that I use. The sole purpose of my videos is to show you my installation approach and share ideas that I have. I am not a professional or an expert in these subject matters but rather, just self-taught. The information that I share in my videos are from my personal experiences and personal opinions, researched materials from manuals or internet documents, and from blogs or forums that may not be 100% accurate. Please do your own diligence to ensure correct product fitment when purchasing via any links that I may provide by verifying with manufacturer or dealer. I am not responsible for information provided here that may cause any damages or financial loss. Changes, omissions or additions maybe performed without notification and I reserve the right to make these changes without notice or obligation.

Опубликовано:

 

3 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 64   
@billy-jadeachiu2296
@billy-jadeachiu2296 2 года назад
I think if that's what you like then it's good😊 I'm not a fan just a little too much for me... have a good safe week!!!🌞
@modXELA
@modXELA 2 года назад
Hey Billy-jade!! I thought I'd give it a shot and see what everybody else thinks. It was a 20-min install so not much invested here and it's not permanent. Nice to hear from you as always my friend!
@Williamvargas-o6i
@Williamvargas-o6i 8 месяцев назад
Good job thanks for the info 👍🏻
@modXELA
@modXELA 7 месяцев назад
You bet! Thanks for tuning in!
@UncleFjester
@UncleFjester 2 года назад
*Addicted to 💩 Mods?* *At my dealership they call this an Ethnic Mod* 😅😅😂😂🤣🤣
@Keepitsavage21
@Keepitsavage21 Год назад
Sometimes you just gotta make old man Jenkins burn up his Cataracs at the stop light 🔥
@DyegoPC1995
@DyegoPC1995 2 месяца назад
Do the reverse white lights actually help? I've been looking for a solution to reversing at night: I had recently installed new tail lights, but their reveres light is a bit dim and I wonder if this LED tailgate strip would sufficiently add enough light to make up for that
@modXELA
@modXELA 2 месяца назад
@@DyegoPC1995 yes it does. I can take a video of it at night and will send you the video link to give you an idea.
@DyegoPC1995
@DyegoPC1995 2 месяца назад
@@modXELA That would be awesome!!! Thanks! 🙏🏻
@modXELA
@modXELA Месяц назад
@@DyegoPC1995 Here's the demo video... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ulILPVRzVe0.html
@muddyh2o2init44
@muddyh2o2init44 2 года назад
Dude, no …. You have a nice taco don’t put that on! It’s totally ghetto fabulous. Sometimes you have to admit you made a mistake buying something. We all have done it. Those are freakin ugly period ! Simple is always better. Stop ✋🏼
@modXELA
@modXELA 2 года назад
Hey Muddyh2o2! Lol... I appreciate your honesty bro! 😁 It's just that Nilight gave me this to install and demo. I thought I'd give it a try and see what everybody else thinks, I really want to see reactions and thank you for sharing yours... looks like it's not off to a good start!!! 😂
@jonathansoriano9015
@jonathansoriano9015 2 года назад
Kuya. I have to agree with Muddy. Then again, I live in the ghetto and see this too often. Perhaps you don’t. 😂
@modXELA
@modXELA 2 года назад
Lol... I do agree with you and Muddyh2o2. It's not permanent and like I said, I want to hear what everyone thinks so thanks for your input Jonathan! =)
@jetsbme1
@jetsbme1 Год назад
Hey brother, great video I am originally from Montreal Canada. My name is Freddie I have a SR5 Toyota Tacoma, 2021. I’m actually doing the hardwire from the back underneath I have the strip light bar and have a three-way harness kit from the back now the only pre-stripped wire on the light bar is red I have everything I need I have the tap in clip I have the shrink rubber wrap what I need to know is from underneath and not from the tail light. Am I looking for red wire to Tap in our model Toyota Tacoma I believe 3rd GENERATION Toyota Tacoma SR5. From underneath when I tap in pre-strip red wire from the LED light strip What am I looking for underneath is that wire red
@MisoJuice
@MisoJuice 11 месяцев назад
So have you hard wired the rest of the wires in yet? How did you keep the snow off the 4wire flap that you talked about? I live in NY and don’t like how that door has to stay open when the lights are hooked up
@tombenedettoaccount
@tombenedettoaccount 8 месяцев назад
XELA, would like to know how you hard-wired (t-tap) the 4-pin wires to bypass using the 4-pin plug. Thanks and great video!
@modXELA
@modXELA 7 месяцев назад
Hi tombenendetto... sorry for late reply. Will work on that video once weather warms up!
@FergieNCC2475
@FergieNCC2475 Год назад
Everybody's taste is different. Been a fan of flashing/blinking brake lights since the original Cyber-light in the early 80's. Really helped on my motorcycle! Added Kahtec brake light flashers to the center light to every vehicle owned since 2002. Still some of the "dimbulb/distracted/yapping on their cell phones" pinheads have come dangerously close. Seeing these decided that I like this type of attention getter and will be better than the center light install. Easier too as I have the cargo light center style which requires two people and pulling down the headliner. Thanks for the video and will be checking more of yours!
@modXELA
@modXELA Год назад
I will never understand distracted drivers. Yep, these light strips are very affordable, easy to install and should last! Thank you so much for tuning in and I hope to chat with you again sometime soon We R Fergie!
@FergieNCC2475
@FergieNCC2475 Год назад
@@modXELA Super excited as just received the Nilight Strip today! As the really cold weather is going to linger thought I'd wait to install despite having a heated garage, but went to test them in case of a problem. OK, is there a trick with getting the plug into the trailer connector? Tried and tried and tried. Looks like they are lining up but won't go in pass 2 or 3 mm. Thanks for your advice!
@modXELA
@modXELA Год назад
@@FergieNCC2475 I would highly recommend for you to wait until the temperature is at least 60F or you'll have problems with it sticking. I'm not clear on your issue regarding the plug. Do you mean the connector of the light strip doesn't fit into your 4-pin plug? Maybe photos will help... you can email me at modsxela@gmail.com.
@FergieNCC2475
@FergieNCC2475 Год назад
@@modXELA Thanks for the quick reply. Will grab some pics in the next couple of days.
@faraon769
@faraon769 5 месяцев назад
Very helpful video ! Thanks a lot . The Rig looks bad ass by the way 👏🏼💪🏼
@modXELA
@modXELA 5 месяцев назад
I appreciate you bro!
@daptoperchen9484
@daptoperchen9484 Год назад
Hello, I am having trouble installing the same LED when it comes to hand wiring the reverse light. Is it possible to do it without a wire tap connector?
@modXELA
@modXELA Год назад
Sure, you can strip the wires and just wrap it directly. Some wire tap connectors are a little finicky.
@jetsbme1
@jetsbme1 Год назад
Hey brother this is FREDDY I’m my install from underneath and not removing the reverse light by tapping into the wire underneath, but I am needing help for is looking for the wire will it be red
@modXELA
@modXELA Год назад
Hey Freddy, fir 3rd gen, there’s only red and white wires and you tap onto the red. What color wires do you see?
@jetsbme1
@jetsbme1 Год назад
@@modXELA hey there well from the tail lamp reverse lap I see red but since so I’m doing it from the back underneath the bumper and my LED strip bar pre-strip wire is red, so I see a bunch of wires bunch together, very skinny and thin there is one that’s red and I added 3 inch cube lights and there is a red tape, wire digger on the skinny ones are a high seen when you get it from the tail lamps you tapped into the red now that I’m doing a cup underneath the back of the bumper and I am I looking for that red one but I don’t know if it’s the red one is very thin that are all bunch together or the more bigger one that’s red that leads from my 3 inch lights
@jetsbme1
@jetsbme1 Год назад
@@modXELA from the tail lamp reversed wire is red and underneath the bumper and why is it a bunch together? Skinny red green white yellow maybe a orange where are all bunched together and skinny there is one Red thicker one that feeds from 3 in. Cube lights connector.
@modXELA
@modXELA Год назад
@@jetsbme1 it’s hard for me to tell if it’s the right one but because it’s thinner, my educated guess is that it is not the correct wire. One way to do it is by using a tester. Check for continuity from the red wire of the reverse light to the wire that you mentioned.
@jetsbme1
@jetsbme1 Год назад
@@modXELA OK thank you cause I would like to do it from underneath the back of the bumper because of my back up camera cause I heard if I do it on the tail lamp may may affect my back up camera what do you think?
@joeavery6587
@joeavery6587 Год назад
i got tge 60in but my reverse has both white and red any idea why?
@modXELA
@modXELA Год назад
Double check the wiring on your 4-pin connector, maybe it got crossed. It shouldn’t do that as the wire for the reverse is independent.
@tylerwinn3461
@tylerwinn3461 Год назад
Late questions but how did that side mirror from last year hold up ?
@modXELA
@modXELA Год назад
Hey Tyler... No complaints here! It's holding up really well. No change in structure/housing and the electrical components are functioning as expected. =)
@dmartinezluis3166
@dmartinezluis3166 Год назад
60 in fit on the Tacoma sport?
@modXELA
@modXELA Год назад
Nope, that’s a little long. You want the 48”
@tactlcal_bacon_bits4773
@tactlcal_bacon_bits4773 Год назад
Installing these is up there with wearing monarch Nikes, it’s when you know you’ve reached retirement age
@modXELA
@modXELA Год назад
Lol... I had to look up what monarch Nike's are. Anyway, I can't see the connection there but thanks for tuning in anyway.
@tactlcal_bacon_bits4773
@tactlcal_bacon_bits4773 Год назад
@@modXELA I’m just messing with you, nice taco man
@modXELA
@modXELA Год назад
@@tactlcal_bacon_bits4773 it's cool, thanks man!
@santhtorac
@santhtorac Год назад
Would like to know your long term review?
@modXELA
@modXELA Год назад
I don't know about long term as I've only had it for 7 months but so far so good. No issues, still works, no dead LEDs so far and no signs of peeling either. I hope this helps and thanks for tuning in santhtorac!
@santhtorac
@santhtorac Год назад
@@modXELA thank you!!
@DaddYes
@DaddYes 11 месяцев назад
Good
@modXELA
@modXELA 11 месяцев назад
Thanks for tuning in DaddYes.
@pineapplesmash6678
@pineapplesmash6678 Год назад
What size wire tap connector did u use 14-18 gauge for the reverse light
@modXELA
@modXELA Год назад
I will verify that for you tonight.
@pineapplesmash6678
@pineapplesmash6678 Год назад
@@modXELA I noticed u didn't use the T wire tap....which I think would be better to use cause when your led light bar will eventually go bad or burn out with the T tap all u got to do is unplug it and put on new...the way u did it the reverse wire will get shorter every time I replace the led light bar
@pineapplesmash6678
@pineapplesmash6678 Год назад
@@modXELA thanks for verifying it for me
@modXELA
@modXELA Год назад
18-22
@modXELA
@modXELA Год назад
@@pineapplesmash6678 totally agree with you but all I have are these quick-snap crimp connectors that were readily available... I will invest on those T-taps, thanks for the tip!
Далее
Учёные из Тринидад и Тобаго
00:23
Amazon Install and Review - Zmoon LED Rear Light Bar
17:39
✅Top 10  Best Tailgate Light Bars 2024
11:23
Просмотров 29 тыс.
Installing a Fuse Tap to run an accessory
16:24
Просмотров 145 тыс.
9 Toyota Tacoma Hidden Features You’ll Actually Use
9:59
Toyota Tacoma Tailgate LED Light Strip/ Bar Install
9:20