Ninebot Max G30 solid tire: REAR WHEEL - How to mount a puncture-proof tyre?

Подписаться 4,3 тыс.

Просмотров 33 тыс.

50% 1

How to mount a solid tyre on the rear wheel of a Ninebot G30 Max? In this tutorial, we show you our method for:
Part 1: Removing the punctured tubeless tyre from the rear wheel.
Part 2: Installing a 10-inch solid tyre on the motor.
Tutorial for all Ninebot Max G30 KickScooter Powered By Segway: Max G30 - Max G30P - Max G30LP - G30D - MAX G30E II - MAX G30LE II - Etc.
We know that this is not an easy job. We hope you will find this tutorial useful. Please feel free to tell us if you succeeded in the comments, it's always nice to have your feedback (positive or negative) 💚🛴🔧💪 The MoovMoov Team.
⬇️ If there is a product in this tutorial that you need, check out the purchase links below:
For our American friends (amazon.com🇺🇸)
🛒 ✅ Solid Tire for Ninebot G30 : pixelfy.me/pGlW24
For our friends in the United Kingdom (amazon.co.uk🇬🇧)
🛒 ✅ Solid Tyre for Ninebot G30 : pixelfy.me/LaZFap
🛒 ✅ Hercules Tyre Levers: pixelfy.me/9fEwkH
--------
👉 If you are interested in the repair and maintenance of electric scooters and want to follow our work, then please subscribe to our channel by clicking on this link:
/ @moovmoov.global
👉 We have done other tutorials on how to change and install Ninebot scooter tyres. Here is the link to the playlist:
• NINEBOT
-
ℹ️⏱ Below are the major steps in this video for installing a FULL 60/70-6.5 (10 inch) tyre on the Rear wheel of a Ninebot G30 Max Scooter Powered by Segway:
00:00 - Introduction of Ninebot Max G30 solid tyre Rear wheel
00:37 - Removing the rear fork covers
02:00 - Accessing the battery compartment
03:31 - Disconnecting the motor
06:17 - Removing the rear wheel
07:20 - Removing the tyre from the rim
11:31 - Removing tubeless tyre 60/70-6.5
14:23 - Preparing to mount 10-inch solid tyre
15:31 - Mounting the puncture-proof tyre (Phase 1)
18:02 - Fitting the puncture-proof tyre (Phase 1)
20:36 - Mounting the solid tyre (Phase 2)
24:02 - Fitting the puncture-proof tyre (Phase 2)
25:24 - Remounting the solid wheel on the scooter
26:10 - Reconnecting the motor
27:45 - Closing the scooter
28:40 - Finishing touches

Хобби

Опубликовано:

7 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@moovmoov.global Год назад

Hi 👋 If there is a product in this tutorial that you need, check out the purchase links below ⬇️ : For our American friends (amazon.com🇺🇸) 🛒 ✅ Solid Tire for Ninebot G30 : pixelfy.me/pGlW24 For our friends in the United Kingdom (amazon.co.uk🇬🇧) 🛒 ✅ Solid Tyre for Ninebot G30 : pixelfy.me/LaZFap 🛒 ✅ Hercules Tyre Levers: pixelfy.me/9fEwkH Good repair 🛴💚

@theselfproclaimedretrogame9383 Год назад

After months of struggle trying to fit a regular tire, I bought the solid tire, much easier, the trick is really putting some of your weight on the base of the wheel, it will expand and open, soapy water helps a lot as well.

@AvalanchCXVII Год назад

Mate, you are the man. Thanks for taking all the time to do this.

@richeyrich6855 Год назад

Thank you so much for what is the best video on RU-vid on this topic! Sincere thanks and Happy New Year.

@Scorpioakaryanhamulak 6 месяцев назад

I absolutely cannot get my tire on for the life of me

@garygary4856 Год назад

Thanks for the video. Good technique !!

@andrewfield5656 5 месяцев назад

Bolted mine to a harbor freight floor mounted steel bender. Made quick work of it.

@ElClavelitoMartinezTv Год назад

U a beast!!! Appreciate it!!!!!

@niteblaster1 Год назад

Brilliant video 😎 When the tire is on the rim and it's not aligned properly I'm going to try using some large plumbers grips to align the tire instead of using levers, I'll let you know if it works😂

@au1947 Год назад

nice video

@winniepeg2020 8 месяцев назад

Good video thanks 😎 I had an idea of a piece of plywood drill it and bolt the wheel down with a couple of slats of wood under it It will pull the rim onto the slats 🤔

@benedettohero3123 7 месяцев назад

Do you know why the blue, yellow and brown wire has a different connector on my scooter?

@Dreamghost21 3 месяца назад

Dude same, the rear tire shrouds also have a different size Allen wrench, 2.5mm is too small and 3mm is too big :(

@Pedro-do-Canada Месяц назад

This thing is so hard

@Weweewewwew 11 месяцев назад

I've tried to install this pneumatic tire same like this one, really hard to install I suggest going to a tire mechanic is best idea, because I've tried so hard to install but doesn't fit need right tools and skill and other thing is tubeless tires are best, because on these tires I can feel a small piece of concrete and so many bumps on footpath

@Bigheadedwon Год назад

good video, but I'll make a correction, you can remove the motor cable and plug it back in without having to remove the controller. I know this because I did it, but to be honest I didn't even know the controller came out like this. You just need to use some needle nose plyers. Also a note, even with plyers I did struggle a bit to get the cable unhooked, same when I rehooked it. So it may or may not be easier than removing the controller depending on how nimble your hands are.

@bigdumbguy2190 9 месяцев назад

Theres a few brands of solid tires to choose from, any suggestions on how to pick the best solid tire?

@winniepeg2020 8 месяцев назад

The one he's using is the lightest one Honeycomb tires tend to flex and feel unstable

@Zignon1977 Год назад

Is it a normal t15 or is it a security t15 that needs to be used? Do you perhaps have a link? Thanks

@lino5353 4 месяца назад

A friend of mine used "Security Torx T15" in his Ninebot G30 Max. Has to be "Security" type for the central hole in the tip to match the central pin in the screw.

@mattsteven3036 Год назад

is it just as comfortable as the air tyres

@niteblaster1 Год назад

It's going to be much more bumpier I bet I'm going to fit some on in the inmotion S1 but it has suspension

@ebiketradersebiketraders1501 Год назад

❤😊

@user-sg3zq9eu1i 2 месяца назад

This is straight bs

@jonprou8302 6 месяцев назад

You don’t mention what tools you use. Where do I get that screw driver and what’s it called. Please 🙏

@lino5353 4 месяца назад

A friend of mine used "Security Torx T15" in his Ninebot G30 Max. Has to be "Security" type for the central hole in the tip to match the central pin in the screw.

@blutvonn8725 Год назад

This looks harder than replacing with a regular tire, but whenever I'm able to put the tire on the rim if it doesn't inflate I have to resort to this...

@dirkgabrielpunzalan1102 Год назад

Whats the size of the tire?

@freedom_born Год назад

Says in the description. 10”

@sershanity8171 5 месяцев назад

I cannot center the god damn thing! 😢😭😭😭

@brundidg1 25 дней назад

I’m having the same issue!

@BIENTOT777 4 месяца назад

Je déconseille ce pneu, il est de mauvaise qualité ! Il se déforme avec la chaleur, le froid, la gomme s'use très vite et quand de l'eau rentre dans le pneu, il se met à patiner et à tourner sur lui-même, donc vous ferez du sur place. I advise against this tire; it is of poor quality! It deforms with heat, cold, the rubber wears out very quickly, and when water enters the tire, it starts to skid and spin on itself, so you'll be stuck in one place.