Nintendo Switch Turns On But Does Not Charge Diagnosis And Repair

Подписаться 104 тыс.

Просмотров 8 тыс.

50% 1

#repair #righttorepair #microsoldering
thecod3r.live/pcbway
PCBWay is the leading provider of custom printed circuit boards, flexible printed circuit boards and even CNC and 3D printing.
Check out the PCBWay shared projects for inspiration: thecod3r.live/pcbwayprojects
Want to become a PCBWay writer? Apply at thecod3r.live/pcbwayarticles
🛠️ Need a repair? Book it with me at consolefix.supportsystem.com/
🛍️ Buy parts, components and tools on my online store: www.consolefix.shop
💰 Patreon Support: thecod3r.live/patreon
💰 PayPal Donations: saraheveritt690@gmail.com (this is my girlfriend's account, I don't have PayPal)
💰 Tips: thecod3r.live/tips
💰 Bitcoin Wallet: 3LagjqGWmPZbwXqmVbuR2sTNXxWBnetLYV
💰 Ethereum Wallet: 0x6248c05bdb14e587d845293520bffa8bb8c7feb8
🔴 Check out my Twitch channel: thecod3r.live/twitch
🎦 Follow on Odysee: odysee.com/@TheCod3r:4
🎦 Second Channel: / @itsconsolefix
🎦 Twitch Channel: thecod3r.live/twitch
📢 Discord: thecod3r.live/discord
🛠️ Workshop Equipment I Either Use Or Recommend:
🛒 Via Amazon: www.amazon.co.uk/hz/wishlist/...
🛒 Atten ST-862D Soldering Iron: s.click.aliexpress.com/e/_Dlz...
🛒 Fake Hakko (works well): s.click.aliexpress.com/e/_DlG...
🛒 Microscope Kit: s.click.aliexpress.com/e/_DeG...
🛒 T12 Soldering Iron: s.click.aliexpress.com/e/_DDx...
🛒 Soldering Iron Tips (Hakko and T12): s.click.aliexpress.com/e/_DB0...
🛒 BGA Reballing Kit: s.click.aliexpress.com/e/_DCY...
🛒 Kingbo RMA-218 Flux: s.click.aliexpress.com/e/_DBa...
🛒 The Good Plungers: s.click.aliexpress.com/e/_DCT...
🛒 BGA Rework Station: s.click.aliexpress.com/e/_DcA...
🛒 Leaded Solder: s.click.aliexpress.com/e/_DFF...
🛒 Fume Extractor: s.click.aliexpress.com/e/_DD4...
🛒 Solder Balls: s.click.aliexpress.com/e/_DBx...
🛒 Tweezers: s.click.aliexpress.com/e/_Dlf...
👬 Friends of the channel:
▶️ Joey Does Tech: / @joeydoestech
▶️ Louis Rossmann: / @rossmanngroup
▶️ My Mate VINCE: / @mymatevince
▶️ TronicsFix: / @tronicsfix
▶️ GetRefurbed: / @getrefurbed
▶️ CCRepairs: / @ccrepairsuk
▶️ Steve Be: / @steve_be
ℹ️ Please be aware that I am part of the Amazon affiliate program, and as such will earn commissions from any affiliate links used above. This helps support the channel by providing extra revenue streams whenever links are used. Support is greatly appreciated!

Развлечения

Опубликовано:

12 май 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@NewRetroRepair 3 года назад

First damnit.

@TheCod3r 3 года назад

Haha awesome you beat Jason 😂

@RWL2012 3 года назад

con-GRAT-u-LATI-ons :P

@DannyWilliamH 2 года назад

Man, older video but I'm glad someone else has had this issue (well, you know what I mean lol). I've fixed a lot of Switch units. A ton and just now came across this exact issue. The thing turns on no problem but will not take so much as a sip of current. Two M92 chips later and she works fine, lol. I thought I was going crazy for a sec and almost moved on as I have a backlog of items too long to give the thing more time than I had.

@lee3521 3 года назад

Great Video Phil!

@shmeebsnaggle6315 3 года назад

Did you lay that Switch screen side down on top of those screws and pieces??

@JohnDoe-dq1wt 3 года назад

Great video mate.

@donniem7979 3 года назад

Bless you for your diligence. I agree with the toothbrushes. So many bristles may clean faster, but you're adding too much at one time and the abrasion takes effect faster. You slog the isopropyl on their enough to not be so heavy on the bristle work. Looks great!

@soul4707 3 года назад

nice work as always!

@TheCod3r 3 года назад

Thanks mate I appreciate the support 😃

@proditaki 3 года назад

Nice repair !

@aspectcarl 3 года назад

Great video 🙂

@JoeCentralTech 3 года назад

Nice Work

@jasondoesthings919 3 года назад

Hey I can finally watch this video. 🥳🥳🥳🥳

@TheCod3r 3 года назад

Haha why couldn't you watch it before?

@jonathansandiford4137 3 года назад

very informative m8. thanks

@TheCod3r 3 года назад

You're welcome bud:)

@ascendantMethEnjoyer Год назад

My Switch will light up when I plug in a charger but won't take a charge. Had a lightning strike near the house that killed a modem, TV, blu-ray player and the switch all on the same circuit

@whaleoilbeefhookedmain7672 3 года назад

Good stuff pal.... the wrong cable almost Caught you out hahaha. Thanks for this one man.

@TheCod3r 3 года назад

Haha almost 😆 always get there in the end though lol

@JoeP1934 3 года назад

Great vid phil, just wondering when are you doing the competition for the £150 workstation?

@dazread7844 3 года назад

great vid mate

@TheCod3r 3 года назад

Thank you bud, much appreciated 🙏

@Ratchet_effect 3 года назад

That's awesome! I use the same HDMI Cables. I'm sure you already know they work great for 4k Console(s) & numerous other devices. Your analytical thinking skills & complex problem-solving skills are indeed on form young Phil You didn't let that end up in the Electronic heaven. 🥳☕🖖

@TheCod3r 3 года назад

Haha yeah those cables are brilliant mate, I have about 8 of those and 5 I use in the workshop, the rest are personal lol. Gotta use your noggin on these sometimes mate, but as little as possible though lol

@farazdelijani 3 года назад

Hello, what piece (IC) did you replace?

@pacobatracio 3 года назад

Hey. Have you ever fixed a n64? I am trying to learn soldering and fixing but would love to see your take on fixing one.

@juscelino2253 8 месяцев назад

so can i check anything before removing m92 and soldering another one? its like try and error? must have some way to find out 😢

@Gunzee 6 месяцев назад

Quick question, I've not used my switch for 6-7 months. I thought it would be a good idea to just get it out and change it up. How should one store the switch for an extended time? Should i remove the battery? Charge the battery every 6 months? Also if there a need to replace the thermal paste and pads? If so how often? Assume it gets very little use.

@marsma18 3 года назад

Why you do not put the diodes after changing the chip? I think that first chip was not properly soldered, if you resolder it it would work. When you remove it it looks like there was too much solder underneth it. And the reason it is true , when you place second chip and tack it down a big solder ball appear. Either way good job on repair.

@TheCod3r 3 года назад

Personally I leave the diode arrays off if I remove them for any reason because the board will work perfectly fine without them, so by leaving them off it's one less failure point in the future. The solder squeezing out is perfectly normal though, when you push down on the chip it pushes it flat to the board and any excess will push out the sides, that basically just allows us to know 100% that the chip is making a good contact with the pads :)

@soulmourne2698 3 года назад

I wonder why those chips fail that much m92t36 and p13usb, i mean all the people i know that have switches and take care of their consoles have never had an issue with the console itself they always have with the stick drift, i wonder if a reason can be the use of 3rd party docks or third party usb c chargers, probably those chargers might not have the exact same current and the chips short or something, i personally also think that the toothbrush is better and faster, good video as always and very well explained :)

@TheCod3r 3 года назад

Thanks bud, the main reason is kids using them while they're charging and causing damage to either the cable or the port, but generally they're very reliable chips :)

@comixzone1634 Год назад

plz what name of the flux ?

@CodyKennedy420 3 года назад

May i have a link of where you buy your m92's please? The spot i bought from has sold me 3 bad chips in a row

@TheCod3r 3 года назад

These are the ones I buy mate, never had an issue with this seller www.aliexpress.com/item/4001351854324.html

@CodyKennedy420 3 года назад

@@TheCod3r i truly appreciate all the help you have given me sir. Thank you for all the helpful videos and advice.

@TheCod3r 3 года назад

@@CodyKennedy420 you're very welcome, glad to help out:)

@chrisa6120 3 года назад

Great fix like always. I have a question for you, that I'd like to get your opinion on if possible. I have a Switch that doesn't dock, or charge on the dock, or chrage with the original charger. It will charge with my cellphone charger, that outputs DC 5v 1.5A with input 100-240v. So in your opinion what could be the problem? I have also looked at the USB-C port an pins an they are fine. Could it be the same issue like this switch with the M92T36 chip? Thank you for any help you can provide without actually looking at the Switch. Thanks again keep up the great work.

@DannyWilliamH 2 года назад

Old comme but, yes. M92 is the weak link in Switch and it handles charging via CC1 & 2 pins to activate VCC and quick charge. The dang things can even partially work so they really are the bane of it's existence lol.

@DannyWilliamH 2 года назад

@@chrisa6120 No problem and glad to hear all went well with the fix!

@juscelino2253 8 месяцев назад

@@chrisa6120can you share the grounded points that shouldnt be?

@chrisa6120 8 месяцев назад

@@juscelino2253 Sorry I can't remember, but I did end up changing the M92T36 chip. Thanks to everyone that commented. I was honestly freaking out the entire time I was changing out the chip, but I got it done an it's worked ever since. Even after 2 drops, I've heard stories about the chip popping off after changing them. I guess those weren't soldered on entirely.

@juscelino2253 8 месяцев назад

thanks bro, i think i will have to try replacing the chip. i watched tons of videos of repair, did a lot of tests. but problems found, and still no charging. it shows charger connected but no current :( i got this problem after installing the modchip rp2040, bur i removed and still no charging

@Musti1986 2 года назад

On time 10:23 if the fuse does not read continuity, does it mean i have to replace that,if so where do i find that or can i just use a jumper instead

@TheCod3r 2 года назад

Yes if the fuse doesn't read continuity you need to replace it. You can use a 0ohm resistor or jumper wire but I recommend using a proper fuse. You need a 3amp fast blow 0402 fuse. You can find them on Aliexpress :)

@Musti1986 2 года назад

@@TheCod3r thx mate,so I'm new to this micro soldering, its really fun if you have the proper tools to do it,now i have ordered the fuse from aliexpress and noticed that that the BQ24193 charging ic and the big cap underneath it is damaged so i ordered that to...i need also some advice from you,on the back of the board around the max ic chip i reading some shorts on couple of the big caps ,is that normal if not does the max chip needs to be replaced as wel? The switch does turn on with a charged battery but does not charge Greetz and keep up with the good works If you have any video's with this problem please send a link thx

@humantorch32 3 года назад

you mentioned Jason's link - tried it and its 404 error - think it needs to be updated

@TheCod3r 3 года назад

I'll get that updated now mate, sorry about that

@pearlguns7576 3 года назад

i repair somtething same , the filter near usb c was the problem, this filter goes to tegra... sorry my english ........

@michaelknowles1651 3 года назад

You streaming this week pal?

@TheCod3r 3 года назад

Should be tonight mate yeah, I have a few things I need to get off my chest lol

@michaelknowles1651 3 года назад

@@TheCod3r nice one, thank you for the reply. I will c you then. Sorry to ask one more question, you got a rough time?

@pearlguns7576 3 года назад

.:how name the piece remove at 13:02?

@TheCod3r 3 года назад

They're called a diode pack, or diode array, you can find them on aliexpress really cheap :) a.aliexpress.com/_mMYaMSh

@pearlguns7576 3 года назад

@@TheCod3r I have a problem with the switch in the past, , only charge when the console is repose mode, never charge when in turn on, I remove this piece (diode array) and works fine now... Thanks mate

@TheCod3r 3 года назад

@@pearlguns7576 awesome man, those diode arrays can be a bit of a pain in the backside lol