Nismo 370Z GETS NEW SHOES!! * 305 VOSSEN WHEELS! * 

Rims on the car look sweet. No flares

Idk why I was digging the stock wheels more but in the end you need to make it your own. I say lower it just a bit

Yeaa stock looked way better

NO FLARESSSSS!!!! It look now on point and really Flush!!!! 😊👍

it looks so good and so clean now all you need to do is lower it a little more and it will be like the perfect combo of a little bit of ricer but your car is still clean so u can use it as a daily

Car looks good , I think the bronze would look better with a Black Z, I think the factory wheels look better overall... I have a 17 white Nizzo myself ...I'm hot and cold changing mine , big rim shop in Norfolk Va. I may take a ride.

Also, a nice set of eibach springs or H&R will give you a perfect wheel gap. 👍

Thanks. I've got the 2017 370Z Nismo in black. Just upgraded to Stillen Gen 3 with Michelin 4S 305's off the stock 285's rear, which honestly, look better than the Vossens IMO? . I do appreciate you tuning me into the AAM test tubes with resonators - just ordered them yesterday. Shame the Wild Child is in the garage here in snowy Canada...but exhaust wise, "I'm cleanin" out my closet"....

NEEDS MORE LOW...

Without fender fence , your Z looks much cleaner and may I say "timeless " !!! Very nice wheels btw !!!

they look nice, however i think stock looks better,---- but do what makes you happy-- bring the FLARES back, looks better..

The bronze doesn't look good on white. It would look better o a black one. Red would've made it look wild.

I think it looks great how it is now! Doesn't need to be lower. But I'm just thinking practically. Lowered looks great for pictures and a smooth track, but I've seen too many fails even with slightly lowered personally.

Car looks perfect, height wise. Love the wheels. But, the unsprung weight penalty would drive me nuts. 10-12 pounds is quite a hit when centrifugal forces are brought into the equation.

The pretend flares are ok, just need the wheels pushed out a bit so it doesnt look tucked when you drop it. Unfortunately you will have to roll or cut the piece that rubs

I love both setups, and keep flares.

With Flares for sure !!

Stock looked better my dude....and with the weight reduction it's a no brainier :(

Z1 two piece rotors will save you 20lbs up front / 10 on the rear, and if you're going to do track days, you're gonna want them anyways! I love mine!

Roll the fenders and get some lowering springs you'll get that perfect daily driver fitment.

The height is perfect don't lower it or raise it but please put those fender flares back on!!! It really looks so much better with them.

Make sure you get an alignment ! Single directional wheel you can’t do normal tire rotation to correct uneven wear

Hey, up till now I followed all your mods om my 2017 nismo (except the AAM exhaust as it costs twice as much when shipping them to europe and I'm a bit afraid of the drone - I use my car as daily driver - but I'm still thinking about it because I love the exterior sound). However, I' m not gonna follow you with the wheels. I prefer the stock model. Nothing to do with handling or weight... not driving it on track you never get close to the limits, so weight is only factor for the bar talk :). The stock wheels, especially with the standard extras trim looks more aggressive. Keep those video's coming....

I have a pearl white 370z and almost got some black wheels but I’m skeptical that it won’t look as clean. For one I’m not a huge fan of the white on black. Pretty typical on a lot of white cars but idk what to look at rn. I’m. Im not fan of a lot of silver wheels but probably a better option then the black

SLAM THE Z BRO!

If ur z was black it would match

When using your torque wrench, do not go over the clicking point as you do right now because you are putting way more torque on the bolts. As soon as the wrench clicks, it has reach its preset torque, if you then keep torquing, the wrench will just keep going.

Z looks great bro ! keep it up.

As others have said, needs more low. Get some Eibach lowering springs or if you want to, some nice coilovers. Wheels look great though. Also get rid of the fender flares. It will look a lot better.

I believe the flares are designed on the NISMO for aero dynamics and not just for looks- Keep the flares

A good set of Swift Springs would do it some justice and keep your performance without killing the bank. No flares btw.

Like the new wheels a lot! Looks cleaner without the flares but dropping it would be even better.

Bigger wheels means sitting higher, harder ride, heavier steering, color doesnt go. Keep fenders on,

Honestly, do whatever makes you happy and you can't go wrong. I would lower it, but only a very very small amount. It would be super easy to over do it and make it look very very bad. But looks are subjective - I prefer the look of the stock wheels - so just do whatever you want with it lol.

Those wheels look so good bro 👌🏽 We must ride out sometime

I like the bronze and white.. It does look a little higher than mine.

Yeah, can't beat the Volk wheels. If they had the bronze finish on the stock wheel; that would be sick

Nissan does a great job with their stock wheels but, personally I like the new ones best!

nice wheels, I don't personally like that look, but it looks nice. I like the flairs though!

Personally wouldn't have altered a Nismo Z, the components (such as the fender flares) are there for a reason. If the offset and widths aren't the same then the dynamics of the car will now be out of spec.....the beginning of a very long road just to get it back to as good as it was..... But ultimately it's your car. :)

You need to upload the picture at the very end asap... looks marvelous

1 inch less gap would be clean

stock wheels nicer but do your thing mate. Bit lower required. keep up the good work!

Would love to see some shots in that last half hour of the day with sunlight hitting 'em! Find a high point + 100-200mm Focal length zoom. Looks sweet man! I'm never rockin 20's since Pilot super sports are already $1250 for 19" 255/285 combo :-(...

Stock wheel looks way better and lighter. Dont kill performance and looks

OMG these are fire...Just lower it a bit

Wow she looks really good with 20" rims even without a drop. Are they casted or forged?

I think it looks great but stock ones look good too. But PLEASE don't roll the arches and lower it . You will regret it and can't put it back to stock to sell. I made the mistake with my s2k.

Looks better stock.

Did u buy a set of TPMS sensor and installed them in ur tires? And did you not need centric bore ring?

i like the rims. Modify the flares and put em back.

i like it! just a slight drop and it will be perfect

keep the finder flayers they look good!

With flares looks better

Needs lowered

Slam it but still make it drivable

Lower it and keep the flares

Wheels look sweet, love the brone on bronze lip, really JDM Great job

Lower it homie. Just enough for ground clearance. Until you put it on bags. Gorgeous whip tho!

BC BR coils PLEASE. Too much gap dude haha

What tires do u have?

My dream car. Thanks for sharing... always enjoy watching your vids about the Z.

bro you put the wrong rear wheels on the wrong side... the tires are directional lmao. That means theyre designed to only face one way. *EDIT* looks like you realized it on/ before the test drive because after i can see theyre on correctly.

What size rims are they

New wheels look good sans wheel well flares.

Looks better without the flared arches

I would definitely have light weight wheels. I also dont carry spare wheel in the trunk either. Pretty much im fucked if one of the 4 wheels ran over a nail. Ohhh well! Risk to take. You should twin turbos it.

I use to sell wheels for rent a wheel and since I'm very educated with cars I see these people and I shake my head cause the wheels are basically either same weight or heavier and I was lucky to change positions to tech position because if they see you sell your out of a job

Bronze seems out of place w the white, black and red....I'd have gone all black. Def need to lower it.

Damn, those stock rims really made the car stand out. Now it looks.. whatever.

think it looks great like it is

What size are those ??

are those vossen wheels forged?

when the torque wrench clicks... you dont push farther, LOL

I love the staggered style.. that back wheel..omg..❤️😱😱❤️ becarefull with bumbs and high sidewalks😎🙏 i.do agree on you. The bronze on a white car looks awesome!! Im jealous haha.. is t bigger actually then the old wheels? I cannot tell so easely.. i do have to like better with the fenderflares to be honest..😉

FENDER FLARES BRO

Dude it needs to be lower I’d say maybe 2 inches Come on man you are a 370z lover just like me and they are the type of sports car that should be lower to the ground. They look way better and drive better when they are lower. I love youre channel and I love you’re car just feel it would be best to lower it.

Hey, do you have a mesh grill? where can I buy one please tell me

Those wheels look soooooo NICE!!

Put the flares back on and lower the ride dogg.

Holy heavy rims batman!!

those are the kind of wheels you will put on a G37 or Q50 not on a NIsmo z ... you need light weight wheels !

Maybe I missed it but what's the rim and tire size?

You need swift springs.. are you on the370z.com.. I feel like I’ve seen those exact wheels up for sale from a guy in New York...

Those flairs looks like some auto zone stuck on garbage. They should’ve never came with those from the factory . Especially on the nismo

When you're done with the fender flares, I'll buy the rears ones off you!!

Yea looks bad now, need to be low and fited more, bag it or run static on coils, otherwise sell thos things an put old one back, no point for wheels if you have truck clearenc

Looks gtreat and dont lower it to much because that is your dailey so having to be so aware sucks because you cannot enjoy your car so make it litte low but not to much.😁💎

what are the offsets? and specs on the tires?

Sweet but u should b using a torque stick....

Definitely put the fender flares back on. They looked good! I say lower it a tad bit. Not to where you have to worry about scraping since its a daily.

Wheels size 20" or 19"?

more weight in wheels will slow down acceleration. i don't like the stock wheels but they look better then the new ones. i like the wheels from the 2013-14 nismo. oh and by the way get the car up to 80-100mph i bet you have a shimmy in the ride. your going to need wheel centering rings. its a plastic piece that goes on the wheel hub lip. a lot of people don't know this and keep chasing a high speed balance problem and your balance is good on the rims and tires its because the after mkt rims fit the bolt pattern but don't fit the hub perfect. tires.tirerack.com/tires/Wheel%20Centering%20Rings "What are these plastic (or metal) rings that came with my wheels?" "Why didn't my wheels come with hub centric centering rings?" The terms "hub centric" and "lug centric" describe the method used to center a wheel on a vehicle's hub to prevent vibration. Most Original Equipment wheels are built with the same centerbore diameter as the hub diameter on the vehicle so the wheel is centered as soon as it's sitting on the studs or the hub. Vehicles have many different hub diameters (or hub bores), therefore aftermarket wheel manufacturers generally make wheels with a large centerbore so the wheel will go on many types of applications. They either use a centering ring or conical seat lug hardware to center the wheel on the hub. Thank me later for this info.

Everyone saying stock wheels look better? I strongly disagree they look awesome and it's your car.

no fender flairs and get coilovers.

What’s the wheel set up ?

Thats fine, it looks cool bro

You should have got black Vossen wheels...

never sit with your legs under the car lol

Drop it like an inch or inch and a half :)