I used a piece of string to get the door pull latch pull inside the door to connect to the door handle. The video is handy but I had to work out for myself what you didn’t show, thanks for the help.
❤GRAZIE ❤ Ci ho provato, in ogni lavoro bisogna imprecare un po'... Ci sono riuscito quasi subito. È anche un po' questione di intuito dopotutto... Grazie, ciao.
I don't know why you would want to remove door card , I did mine in twenty minuets , bought juke handle from Ebay £13 , all replacements handles come in black even from Nissan ( £70 +vat ) , you take the inner part only and fit to your existing wiring and handle cover , you only take the card out if the wiring has been damage .
Hi there how easy it to remove the internal of a door handle? I would like to use the existing casing as getting it paint matched and painted going to cost me $330 aud!!
You don’t need to disconnect it, just loosen the torx screw at side of door (it won’t come fully out as it has a stopper to stop it falling out into the door) for this reason the very tip of it tends to stay in the lock making you think there’s something else stopping it from being removable. You just need to keep unscrewing the screw as you wiggle the lock and it will come straight out.
just loosen the torx screw at side of door (it won’t come fully out as it has a stopper to stop it falling out into the door) for this reason the very tip of it tends to stay in the lock making you think there’s something else stopping it from being removable. You just need to keep unscrewing the screw as you wiggle the lock and it will come straight out.