Nissan Note (2010) and Micra rear wheel bearing change 

Bloody splendid video! Audio ignored, it is exemplary. Informative, step by step, safety tips and all. Well done!

The extraction kit you have used in this video is listed as "front" bearing kit and the smallest bearing diameter is 54mm. The rear bearings are only 52mm. This kit is only £45 on ebay. The cheapest wider range kit is about 60. I have ordered a larger range set for 70 as I intend to sell it after I have used it. Great video; Thanks.

Brilliant thanks, real world instructions and realistic experience of doing jobs with the tools you have without spending a fortune on specific tools you're only gonna use once.

Thanks 👍 God bless you From Nick Ayivor from London England UK 🇬🇧

Probably a good idea to refit the road wheel loosely, then lower the vehicle before trying to undo the hub nut (the wheel centre caps just clip on, or just remove your wheel trims if fitted). Jumping up and down on a breaker bar with the car on stands is not a great idea. Other than that, great vid!

Very clear and VERY well made. Thank you

You didn't put any pressure on the ABS ring when pulling the new bearing in? I have both the bearing puller kit and and a 10 ton press, so equipped to do the Micra bearing. This looks an easy job, having done different types of bearings. Good video.

Hi is there a video on replacing the front wheel bearing for nissan note 2010 1.5 dci or is it the same as another nissan

why didnt you show the bit where you loosened the 30 mmm nilock nut ?

Top video, very clear and informative thanks for your help.

Thanks for replying I trusted a mechanic to press out the old bearing but he pressed it the wrong way I've a photo of the consequences won't use him again

Very helpful and it's in English

Thanks for the video. How big is the nylon hub nut please? thanks in advance

Shouldnt the bearing be fitted to the hub not the drum. The drum should come off seperate to the bearing simply by backing off the shoes with the adjuster....?

good video mate thanks gonna have a go on my Micra, tony Leics

Hi its a really good video I need to ask how to remove that star shaped wheel nut does it removes with the same wheel nut opener?

Good video, how long approx did this take to replace the bearing.

Brilliant video do you have a link to where to buy the extractor tool

Hi is it worth freezing the new bearing and dropping it in

Cheer mate

Too good not to like 👍