Nissan P1610 P1612 Theft PCM installed a NON Anti Theft Car! FIXED! 

I added links to the description for all the tools and equipment used in this video! Also check out my amazon store for more COOL stuff HERE: tinyurl.com/yc8d99vf

A guy from a small channel set me. I came to see you give it the full beans.

SMA sent me.

Eric O has a sound effect for brake clean! You need one for flux!🤣🤣

Eric sent me to boost your low viewer numbers lol , Nice job on the fix.

Eric O sent me as well

South Main Auto to here, this reminds me of the repairs Louis Rossmann does on Apple products. You guys make SMD changeouts look easy.

Cool channel, SMA sent me as well... I had a good chuckle when u called his channel small 🤣

"there's your problem, lady!"

SMA sent me! Man, I don’t know how you guys do that stuff! I have a hell of a time just soldering two speaker wires together!

Unsoldering that was probably the coolest thing I've seen in awhile. Never seen it done like that before

...and we segue from SMA to SMD rework. Nicely done.

Eric sent me. I'm now a subscriber. Fascinating work!

Here from SMA, Excellent work sir.

Hello, SMA sent me here as well and that was a pretty cool swap. You have a job for life.

SMA sent me. Takes a smart man, to know when he needs a smarter man to help!

SMA sent me too. That moment when the solder melted and pulled the replacement chip into perfect alignment was the coolest thing I've seen all day.

Dis guy from Avoca told me to check this channel out, I subscribed.

Eric sent me. Wow, you guys used team work to get this one figure out. Yeah, SMA is a small channel. (ha ha)

Nice, you made that look easy, nice to see honest people like you and Eric team up to help someone get their vehicle back on the road.

Eric, Very glad Keith was able to help you out! I know how annoying not being able to track down AND repair the problem part can be! Congrats!

Sooooo I had the exact same issue. 2007 frontier bad ecu (non immobilized) I purchased a 2007 xtera ecu with an immobilizer and literally used the heat gun to lift the chip off on and put on the other.. no flux, no tape no nothing.. I know your way is the best safest method but I needed my truck back running and this video saved me at least $400. Truck runs flawless!! Thanks for this video! Subscribed!

with you,eric o, jim the car guy, and ivan there is no need for tv in my house. incredible team work

The solder sucking it in was very satisfying

SMA sent me over, nice job Keith.

Thanks so much for showing a simple way of removing & installing computer chips. Great work. When Eric O. reinstalled this repaired ECM into the 2005 Nissan Frontier truck, it worked!

Louis would be proud of you, you made sure the chip was perfectly lined up. He normally just throws it on with no care if its perfect. Lol

Scotty sent me - no wait... Eric... Eric sent me. Came as a guest left as subscriber :-)

That was badass. I never knew such a repair was even possible. Now I know two people who are smarter than a computer, you and Eric.

i watch all of south main autos videos when he uploads them an from what i seen in nissan p1705 video an you sir are the real MVP i hope you an SMA do more videos helping an teaching others your knowledge in automotive an small electronics pcms bcm tcms etc keep up the great work

SMA sent me over here, I was already subscribed from New Level Auto. Very Interesting work! This stuff interests me more than doing the heavy mechanical work on vehicles.

I had no idea those conformal coated sealed boxes could be fixed like that...amazing!

That was cool to watch, able to fix a car and not get dirty or lay in the snow awesome

Back in the 1970s and 1980s I used to do EPROM programming, and it was NOTHING like this. lol I had no idea how those components were changed out. What an eye opener.

New subscriber here, Dr. O sent me. I'm an old school, home shop on the side mechanic. However, even if I never have to do anything like this, I like learning about this kind of thing.

Also just came from SMA . . . Last year I resolder a connector on my '01 Dakota ABS module and that fixed the ABS light.

Damn impressive! I'm a retired 'magnetic latching relay' guy. A small channel guy sent me.

Great job 👍

Who is this Eric / SMA guy ? Is he worth checking out ?

"Technically you can't really have too much flux" If anyone has seen a Louis Rossmann board repair video, you would know that to be VERY true. 😄

Hi Keith, Came right here from S.M.A. in regards to the 05' Frontier. I've been watching Eric's channel for many years now. Up until this video, I was unaware this channel existed. I must say though, this is an awesome channel and a new subscription for me. Looking forward to going back and watching your previous vids as well as your future content as well. 👍

Eric O sent me here and said to subscribe, so I came here and subscribed. What you do is amazing!

So much detailed explanation. Thank you.

Nice work, Keith! You make it look easy-but I know it's not! Awesome video, thanks!

I’m watching this from South Main Auto’s video ! Great Knowledge fixes problems!

Very cool, wish I'd know about the flux trick back when I was doing board repair! Lifting traces was always a problem...

Another visitor from SMA, and another subscriber to add to your list!

Erik is very good at looking for electrical faults, and you are probably very good at stt fixing data boxes, Eric said that you were very good. sweden 8/1 12.34 👍

"can't have too much flux" Release the shmoo!

SMA sent me. So, @510k subs, SMA is small...lol. Thanks for helping Eric out. Poor owner of that Frontier, multiple parts cannons fired at it, who knows how much wasted cash....and it all boiled down to a wrong ecm chip. Subbed. Nice work, great explanation.

Thank you. For the links to the tools as well.

Impressive work!

Learned some new things here. Also learned I have a lot to learn. No wonder Eric O sent the ECM to you.

Nice work!

Didn't know that could be done, impressive. Watched the SMA repair which was fascinating too. Will be subscribing.👍

SMA to blame - now subscribed :) I've watched a lot of videos that include yourself, Eric, and Ivan. All awesome, fun, super helpful, and informative channels!! SouthMainAuto & Pinehollowautodiagnostics

That was my buddy’s pcm you fixed. Eric sent me to watch this. Cool video but I don’t know what the hell you are talking about.

Its going to be years before I get that deep into repair, and by then I'll be lucky to not only see what I doing, but hold it steady too....

SMA bomb. Dr O appriciates the assist!

Mr. O from SMA sent me, and now I'm a subscriber.

The guy with the JEEP ball cap said to check this channel out. You made quick work of that repair simple exchange.

And I thought Eric was a smart dude. Damn brother I am impressed. This will make Eric O. look like Magic Tom.

That guy that has Big Nasty 2.0 and won’t share it with us sent me over. Lol. Awesome job. Subscribed.

Whoa, this is some low level work that is amazing.- you just got another subscriber.

I see you went to the Rossman school of flux application :D

great job!

Nice work Keith; Eric sent me and now I have another channel to watch and learn from. Subscribed.

Good to see ya Keith been awhile brother great work on this one watched Eric O and his frustration on the Nissan frontier @L1AutomotiveTraning @SouthMainAutoRepairLLC

I definitely need to learn how to solder...SMA sent me. Nice work.

I'm just a Nissan guy who likes the SMA and crew channel... So of course I subscribed !

hello great video you make it look so easy great work.

I blame Eric O for adding this channel to my list of fascinating things to watch. I am genuinely confused on how no additional solder was used here to get this new component back on the board. That was some kind of voodoo wizardry... I'm hoping you have some additional videos on here discussing captains tape, and this whole process.

That little SMA channel sent me. You make the nerdy stuff look as easy as Eric makes the manly stuff look..... :)

Just came from watching Eric O. Great video and great fix.... now subbed to watch more of your great vids. Shout out to SMA.

Ivan and Eric consider you a God, now I know why.

I am interested because some shady guy over in Avoca sent me, now I am also a subscriber :) If you are his go to guy, then you certainly deserve a great deal of respect from us all as well.

Sir you did excellent... But when you were adding pin strip during the soldering soldering iron would be better to another angle. That would damage smd resistors

Eric O sent me. Glad he did, now a subscriber.

Here from SMA - Nice work - Subscribed

Here from SMA Also! great work!

Coming over from SMA... Nice job. Love the camera work. Interesting that you can download the eprom from both. You must a large library of 'digitial' info.

Sent over from SMA. Helpful video.

Mr O sent me too, nice work, great fix .

Eric O sent me. Thanks for your explanation of your work.

captains tape, sounds like a good "tool" to have. Im gonna have to look that stuff up, thanks for sharing.

Another SMA transplant. Good video, sir. Subbed

Eric O sent me too. Great channel and my first time viewing it. Hey RU-vid….Why wasn’t this channel recommended to me based on my viewing history? Maybe you should hire L1 to fix your algorithms.

I'm here because I believe transmissions work by fluid and magic 😂

Another SMA sub here. 👍 nice work!

I bet the used/salvage computer came from a vehicle that had cable throttle. The vehicle and OG PCM has drive by wire. The trans module is looking for a pedal position PID that isn't present in a cable throttle PCM.

Ponch sez “Howdy ho neighbor!” Sez you failed to mention how BIG the ‘engine’ was in that Mother! 🤣

Thanks for sending me here SMA.

Hi,nice work.I'm new to your channel but i can see from the comments there is a lot of interest in what this entails.I like to watch Eric and Ivan,and also watch computer diag.and repairs with hot air stations etc as tools.I'm interested in see the code if you figured it out.Or just the number difference on the e prom chip.And how you figured that was the chip.IT'S part of my OCD issue,haha I fix or break laptops for fun,for me hardware is not and issue ,it's the software that takes brains.thanks to Eric you should now have about 2.no 10 new viewers>>oops I MEANT 10,000 VIEWERS you know cause he has such a small channel!!!haha

SMA sent me! Awesome technique!

Eric O sent me! Dig the work, time to repair some Super Nintendos!

Super small Eric O/SMA sent me over... good work!

That other guy from the small subscriber base sent me. Amazing how many watch Louis tool! Added another subscriber here as well!

Loved the colab. I was making bets that the ecm would not work because Nissan is the devil. I have delt with Nissan diagnostic in the past and opted out of getting used modules because of Eric O problems. SMA sent me. But to be fair, the truck he was working on was a hot mess from the get go and with multiple parts changed out I would have thrown in the towel.

Fascinating. Happy to be here. Eric O sent me.

First time Ive seen someone solder like that, very cool. Does the heat not hurt the chip?