Nitro Engine Tuning...101 

You said is not a great tuning video, but this has been the best tuning video I've seen period.

Just getting back into the hobby and loving your videos. Going from a frustrated walk away to an educated enthusiast. Please keep it up.

Says "this is not a good tune video". Me: best video I've came across, finally understand how it should sound. Been trying to get it right for the longest

Love the vids dude, been watching you a lot lately. You've got me getting back into nitros! I started running e-words but now i'm rebuilding both of my nitros and thinking about getting a nice racing buggy.

Amazing Video. Thank you. This is very helpful. Need to watch over a couple of times to register it in my memory. Really like the quick tips your giving

Good video brotha, this will definitely help ppl out who are having tuning issues. This is what its all about. Helping ppl. this is what I love to see man. Keep up the fantastic work bro. Thanks,

Am going to tune my novarossi today, nice one for your info dude 👍 as am running the p7 they sound frigin awesome nova!! You say it how it man peace ✌️

Asome video really helped a lot just order my first nitro race buggy impart because of your videos thanks for all the Asome content

Wonderful video man. Been watching your videos for a year or so, true gentleman and ambassador to the nitro hobby and super informative. Thanks for the content, looking to finish breaking my Ielasi tuned novarossi .28 3 port this weekend and getting my slightly modified losi 8ight t rtr tuned up this weekend. Have a good one brother

I thought I knew a lot about tuning....great vid ...very easy to understand and also shows how to trouble shoot.🔥👍

AMAZING VIDEO BROTHER!! Must give this a try.

Thank you for making this video man! Great stiff and very much appreciated for your time!

Great video man. Helps a lot with my 8ight RTR

Thank you for the information great video keep in touch

Can’t believe anyone would give a thumbs down, so much good information!!!

Nice vid good explanation nice low idle & dropping down immediately to an idle good stuff 😎👍🏾👊🏾

I definitely have to save this video for when I do get a nitro engine. Thank you again for the great video and information.

Bravo, excellent video.

Guys, Pre heating also saves wear & tear on the engine-sleeve , due to the pinch at start-up . If you want it to last (a very long time ) pre-heat your engines .

Thanks brother! That was a great video I need more like that.... I can’t tune to save my life.

I would have given a thousand likes if I could. Got my old Mega Nova SX21 engine running quite well. I was getting quite desperate, to be honest, but following your method did the trick!

Making the best of lockdown by breaking in a nitro. Thanks for the content.

great video bro I’m still learning the game I’m in the process of tuning my new engine nova 28.8 and yes I’m hooked wife on my ass about parts lol appreciate you ✊🏾

I like your vids they help a lot I watch them all the time

That was a nice one Rajaa I like that brother keep up the good work👍😤

Great video bro! I saved this one to my rc play list 👍🏼👌🏼

Rajaa bringing the knowledge again. Thanks bro. Best rc channel in RU-vid

great vid man probly one of the best ways to get a good idea of how tuning should work listening is the main thing as u say once again great vid to get a box tune

A great tuning video, Thanks for sharing...time to dust off all my nitros and scare some birds. Miss the smell, and the sound.

bro this is sooooo good thanks sir!!! @19:00 really helped me out with my low speed settings.

Love it brother I needed you lol😁👍👍

I was needing a tuning video, thanks brother for the great info. Hopefully you will do a full race tuning video 🔥🔥😎

Bro when made that clutch video I was able to rebuilt my novarossi clutch, that’s so true bruha listening 👂 engine hearing the engine it’s better than the sight make that sweet sound baby👍👍

Thank you very helpful for me!

Great explanation brotha u killed it🤘

Great video brotha, just finished breaking in my Nova Mantra in buggy and K501 in truggy earlier today. Left’Em on the rich side since cool out and on concrete. I see why you love the FX engines, easy to tune and that K501 was rippin. Can’t wait to try my K302 in buggy. Praying for this chaos to end to hit these tracks!

Keep it going my brother 💪💯

Good video bro ! Keep safe ! We are also in lockdown on the uk ... miss driving my RCs

My go to nitro guy !!!!!!! Watch all your videos

I bought a 12 pack of those hobao t3 plugs, I really like them.

Thank you for this video

I like watching your vids because I am a newby to nitro cars at the moment I like watching the nitro cars go around the track mine nitro car is getting fix at the moment down in adelaide

Waowww bro, for me the best tuning video in RU-vid!! 👍💪💪

thank you so much for this

best nitro tuning video i saw 👍

Great video mate, you explain the tuning especially on the low speed needle and idle very well. Also I’m a big fan of fx engines too, I’ve got a k301 in my mp9 buggy and it’s the best running and easiest to tune engine I’ve ever owned. Keen to get a fx 5 port for my truggy in the future too 👌

Amazing job👏👊

Good tune Job you say it's not the best this is good will send it to the new RCBoys.

Nice video thanks

awesome👍🏻👍🏻👍🏻

Great info bro!!🏎💨💯👊💪💪👍👍

Great video, thank you 👍

Another great one🤩😎

Nice my man😊

Yes sir!! I can tune my engine based off sound/ smoke. You can also smell when the motor is too hot

Taking me to school my dude great content.

Good info

Smh.....u know how to tune them thangs bro....🔥🔥🔥🔥

What’s going on brother, hope you and family are safe! Big, big fan! Have a TLR 8 x elite with a Roma .25..

Liked, subscribed

Can confrim! I have old Mugen MBX-5 with Novarossi and old Honda Civic. Both reliable as hell

My man👍🏼👍🏼👊🏻🔥

one tip, do it with wheels on, the tune is quite differnt without wheels.

This is perfect! I struggle with trim. What should that be at on the controller?

I got a picco P3TT in a losi eight,any idea why its so tight(nearly binding)to turn over and locks at dead center? Had someone else put the engine together and am worried its been done wrong as opposed to it just being new and tight? Any advice would be much appreciated 🙏

Great stuff.what do u say about the secondary drop in nitro engines..good or bad..?

It is the best video

Hope i get to see you at one of the tracks around here ma man!

Fantastic video. I think I have my tune pretty good on my OS B2103, but it likes to drink a little too much fuel overall. I'm hesitant to lean it up, but in a more controlled table-top environment like this, I may try to optimize it. I live in the Phoenix area, and it is HOT! Running 30% nitro, I have found that a P5 (colder) plug seems to help idle and overall motor consistency vs. the stock P3. However, this probably attributed to the richer running as well. I really like the "hose technique" you're doing. Where did you run it? Does it just run along the floor to a door then to the outside? How long is the hose, and does it affect back-pressure or the tune when taken off?

Hey man, I have a question, I have been reading on tuning and noticed that the long low speed needle tuning is different than the short low speed needle. I have the long low speed needle, can you give me some steps on how I tune it? Thanks

Awesome video man just getting back into 1/8 racing my old engine was way out of tune. Needed this video! When you say you’re adjusting the idle that’s the mid range needle right?

Thankx for the idea sound cause im no motor guru sweet an ty

Great video. Please tell me if I'm correct. A general base setting for any engine is 3 turns out on hsn and lsn flush?

chilling g looking to learn

16:47 here you have a good tune, the idle drops down after rev and stays, you screw on it afterwards and screw it up. i would test with wheels on the road with the settings at 16:47. when you load the engine it behaves different and wants more fuel than unloaded.

One more question: when you tune from day to day, do you also adjust carb gap? Thanks 😊👍

great video dude, quick question i've got a HPI savage x 4.6, recently built it as it was in storage, the engine seems like its got load of compression. Engine fires up greatly, however i do notice a little bit of tiny tiny bubbles building up and kind of going (disapearing) in the fuel line, is this something to be concerned or do i just drive the thing, its not big blob of bubbles if that makes sense..

Appreciate your vids mate. Some great information on them. Can I ask a question ?... My engine won't prime, for some reason. Blocking the exhaust, while pulling starter, doesn't push any fuel. I have to blow into fuel hose, to push fuel through. Any idea's ?

Just got my new blok gotta finish break in as it was oil bath from factory.

Great job SUPER NICE! QUESTION, is rich running worse than lean?

been looking through your vids but didnt see one do you have a video for suggestions on where to start with 1/8 nitro buggies i dont really want to do rtr cause building it is part of the fun but that being said it might be the best choice because a kit build seems to add up pretty quick between engine receivers and so on. also any suggestion on a good entry e buggy would be cool.

@rajaa111 where’d you get the tubing on the exhaust from? Great video boss

how do you like the m2c starter box setup. mine truck locks in good buggy not the greatest.

What's up brother, been watching alot of ya vids non stop ( new sub) been wanting to get into some novice racing here local at adrenaline in Virginia ( how I found you) but I really was looking at 4x4 e words but I just cant decide on if that losi 8t is a decent 8th scale kit for a new to nitro rookie to get into the game with? Would really appreciate a new to racing / getting Into racing video and drop some jewels for a borther!!

Thanks man! I can never get my nitro engines tuned right. But I am running junk rtr engines. I am thinking of buying the Novarossi Bonito 7 port for my MP9 roller I bought. What are your thoughts?

What if it bogs from a take off and sometimes turn off

Hey brother I got a question. Have you ever run the Nova Roma 25? And if so what plug? I have been running the cto6 and they are out of stock everywhere. Your vids are great and appreciate all the info!

Ciao come fai ad ottenere una scorrevolezza della trasmissipne generale cosi efficiente ? Usi tipi di cuscinetti particolari?

How much adjusting from day to day use? And when you need to adjust maybe because of different humidity, do you only adjust the high speed needle?

what tools do you use to wrench your car? THE DRIVERS

Yo i gat a rtr losi truck been having trouble with the break in process........i use the heat gun to get it to 200 degrees.......how many turns on the high end and low end should i start off with having trouble getting it started i hate this pull start

Doesn't that big long tube affect your tune unless you're going to run with that tube

Bro when i was tunning one of my P5s it kept flaming out the mt hobby owner thats raced fir 20 years told me to run #3 hot..aftwr that smooth as butter..no more flame outs so all i run are hot plugs in my 21s

Show carro 🚗 nitro

Wangsters? Lmao. I appreciate your vids.

what did you use to glue the fuel line holders on the tank???

I need to send you me nova .28.8 I just cannot get it right either good bottom loads or good and idle up then back down

Just put a band new novarossi clutch and bell clutch all nova. How do I know when it’s sleeping. It’s takes off good then it slows down alot

Hi. I really like your videos. Can you give me some advise plz. I have an Sworkz 350 evo 2 limited with a reds evoke r7.

A flat head and some clean ears all u need! And some more ⛽️😊🪛