Noise blockers or "grounding boxes" review. Magic devices for everyone :) 

Thats actually interesting thing to do, and easy to try, looks safe too. I'll try that sometime in the summer! This would work better as a "sink"

@@k4syx I think I've spent more time optimizing ground than many haha, big gains to be had. Super easy to do. To optimize ground you need a combination of ultracapitors for high frequency, larger is better I use a 3400F Eaton, I use dual kemet 150,000uf electrolytics which you need ultra low esr for sub 100hz for ripple rejection, a large 20ah lifepo4 battery 12v connecting positive pole to star ground and then Panasonic fr series capacitor 16v 47uf cap between +/- pole of the battery. I have brought my ground noise from 1400mv ac to 0.8mv ac with this setup. The sonic improvement on my already truly end game system was not small, not small at all.

I did this too, but you can make it so much better. The trick, see my content it shows my systems sound, run from this box some big 300+ farad ultracapitor connect + to this box and negative to true ground, then do the same with a big kemet 100,000uf or bigger hook it up the same and use kemet the best for low esr ripple for under 100hz... Those two things added to your setup now will blow you away

@TheDocAudioShow I think your approach is different than mine. I think both work...

@@barskuleli8612 no it's not, I've gone to the end of the end with my grounding system. I also used Oscilloscopes to verify and test everything, including listening. You have a lot of noise remaining on your system I guarantee it. Trust me, the caps will shunt the nosie to ground and the polarity won't allow back feed. I guarantee you are blown away with a maxwell s19 325F cap and 150,000 kemet 25v cap + to your box negative to wall ground. You will be truly blow away... You can do more than this. When you see how much better this sounds, reach out and I'll tell you how to take it farther. Guarantee

You forgot to add salt 'n pepper.

@razisn I added salt don't worry about it..

Hi Doc, can‘t see this in your Videos? Make a Video and open one. Tell us more about your capacitors? Thanks greetings Dirk

@@dirkrs I will make a video about my grounding before long subscribe

Yes this is easy to try - just a big box, bowl , or aything really filled with sand

@@k4syx Sand will not work!! It has to be a piezo electric cristal like tormaline or quartz!!! There are several U-tube clips on the prppretys of piezo electric cristal watch them. Just stop caling it sand it willl not work.

I have cut them open... AA battery in black epoxy... Lead solder to + terminal. Uses positive pole to attract negatively charged electrons

@@TheDocAudioShow So this actuallu would be different from regular grounding boxes: I think I need to cut one of mine open. Or use magnet, charged AAs should react.

@@k4syx I PROMISE you they are AA batteries lol. I used a angle grinder cut the top off becareful because it is a battery... You will see I have pictures of me cutting them open just can't post here

very interresting, i will sacriffice mine and see

@@terriludolf6101 I cut two open... Trust me they are AA batteries

I did not, I never touch any comments under my videos (Ive actually answered a bit above)

@@k4syx Then who is deliting post's i have had 2 removed, if this continu i vill unsub!

@@fredrikbarthel4803 I have no idea, maybe someone was reporting them, what was in them? What they were about? Seriously, I'm not touching any comments here - if I am disagreeing on something I just answer with my disagreements, and so far everyone here discusses politely (though I've seen some "idiot audiophiles" flying here and there :))

Actually stray currents induced in shielding or cases are real. same goes for internal components, though its debatable if the scale there is large enough to let you hear the change. This would work as a sink for free flow electrons BUT not the same way as grouding this as this would not close the circuit. On the physics level I buy this as I can understand the rules and this sticks to my professional knowledge. However as I said, there is just one system that I have that is transparent enough to have any effect. If youll read comments below one of the guys says these are AA batteries with + connected, that would be even better as a sink. You can try this for like 1 usd on your setup.

@@k4syx Bullshit.

@@k4syx 40 years in electronics and this is the first time I've heard any of this. There is a LOT of "science" that exists only in the audiophile community... and no surprise most of it involves junk that does nothing.