Noises when turning off the engine, driving and lack of power. Troubleshooting Alfa Romeo 147 JTD

Подписаться 9 тыс.

Просмотров 1,3 тыс.

50% 1

Hello guys! Here is the step-by-step troubleshooting of why all this problem with the gearbox. Always question what is happening, it is usually a consequence of something. That something was a simple turbo geometry control solenoid valve. With this fault, the car had no power, it did not have a smooth shutdown and without a smooth shutdown, the engine flywheel is immediately compromised! In fact, the result is visible, clutch kit, dual mass engine flywheel, new or used gearbox. Adding all the labor.
If you liked this or any other of my videos, please SHARE with your friends, hit the LIKE button and consider SUBSCRIBE!
--------------------------------------------------------------------------------
PayPal link to help my channel:
www.paypal.me/alfaromeonoproblem
Support the channel via MBWay: (+351)913225320
Patreon link to help my channel:
/ alfaromeonoproblem
--------------------------------------------------------------------------------
How to remove the gearbox on Alfa Romeo 147, 156 and GT to replace the clutch set:
• Noise in the gearbox o...
How to diagnose vacuum lines and boost sensor:
• Turbo fault codes? How...
How to test the MAF mass air flow meter:
• Failing Mass Air Flow ...
How to diagnose and solve irregular power Alfa Romeo 1.9 MultiJet JTD 16v:
• How to solve low or ir...
All Videos for Alfa Romeo 164 and 166 V6 Turbo Busso 2.0L:
• Behind the scenes, Alf...
Timing belts\chains How to:
• Alfa Romeo 155 1.9td t...
Alfa Romeo owners in need of help! I try to:
• Car sold with warranty...
Alfa Romeo Experts in Potugal (so far):
• New series! Alfa Romeo...
Ac Sytems, faults, solutions ans tips:
• Stop charging the A/C ...
Cooling systems, failure and maintenance:
• Is the temperature gau...
Ligth bulbs and ilumination:
• Light fault system on,...
Everyting suspension:
• Broken alfa 75 suspens...
Clutch engagement, DMFs, master and slave cylinders:
• How to remove and re-u...
Brakes, solutions and problems:
• Big brakes!? Do you re...
Power problems and solutions:
• Mjet Injectors, how to...
DPF and FAP problems and solutions:
• DPF and FAP, do you re...
Project Alfa 75\Milano:
• Alfa Romeo 75, project...
Alfa 33 1,7 16v complete restoration:
• Alfa Romeo 33 1.7 16v ...
Tutorial videos:
• How does a starter mot...
Quick tips:
• Quick tips! Car don't ...
Electrical issues:
• How to test your fans?...
Mjet\jtd engines, hard start or no start:
• It's worse! But why? ...
Vlog videos:
• My Alfa Romeo 155 pres...
Autel Diagnosis Machine:
• How to SOLVE airbag li...
Contact me:
alfaromeonoproblem@gmail.com
Where i do my research of parts: www.eper.fiatforum.com
Where i buy OEM parts in PORTUGAL:
JRParts www.jrparts.pt/
Rua Dionísio Rodrigues 70, 2415-801 Leiria PORTUGAL
(+351)244820770 lojaonline@jrparts.pt
Where i buy all ORIGINAL parts in PORTUGAL:
LizItalia www.lizitalia-fcadealer.pt/co... (+351)244 871 520
Rua Dr, R. Virgílio Vieira da Cunha, 2401-903 Leiria PORTUGAL
Parts e-mail: vitorjoao.lizitalia@lizauto.pt
Alfista salutations!
#AlfaRomeo #alfa147 #AlfaRomeoNoProblem

Авто/Мото

Опубликовано:

9 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@5Dale65 Месяц назад

In Poland I got a new genuine original Pierburg turbo valve for 170 PLN which is just about 40 EUR :)

@alfaromeonoproblem Месяц назад

Nice! Here in Portugal everuth is very expensive, a lot of taxes

@william_mazza Месяц назад

A question not related to this video, is it useful to clean the stock oil catch can in the 2.4 jtdm engine?

@alfaromeonoproblem Месяц назад

Hello. It is self cleaning and self draining. Thanks for watching

@william_mazza Месяц назад

Thank you

@MikeW515 Месяц назад

Hello Bruno. Great videos and great work! Thank you! Could you please share your thoughts on the engine mounts i.e which ones you find work best for the Alfa 147 Jtd 1.9 85kw, 2004 the old model? I've changed the lower 2 with Metalcaucho ones and the vibrations on the startup went away, but after a couple of days I changed the upper right mount as well (not Metalcaucho) and the vibrations on idle went just insane, the engine has changed the sound, the noise from the engine inside the cabin is louder and when turning off the engine you can hear the pulleys and everything from the engine bay way louder. I tried to find the original mount from Italy but they're not produced anymore as I've heard of and the brand on that mount seems not existent.

@alfaromeonoproblem Месяц назад

Hello. Try new old stock for original ones. If not, impergom usually are excellent

@MikeW515 Месяц назад

@@alfaromeonoproblem Thank you! Much appreciated!

@enidra5388 Месяц назад

hi, very interesting video, do you know if there is the same smooth engine shut-off system on 1.4 turbo multiair ? thank you

@alfaromeonoproblem Месяц назад

Hello. All Gasoline engines have that naturally, provided by the throttle body

@DashCamSerbia Месяц назад

@@alfaromeonoproblem Even so, I still always shut down my 2.2 JTS engine with the clutch pedal pressed in. And I keep it pressed for like 10 seconds after that. If I do it without pressing the clutch, there is shaking present during shut off. :/

@ClementNaidoo-xg1ty Месяц назад

Hi, Would you be able assist me with timing specs for a 2014 Giulietta 1750 TBI. Vehicle has compression, fuel, oil and spark, but isn't starting. I've tried to set the timing with the locking tool, but it still seems off

@alfaromeonoproblem Месяц назад

Hello. I do not have a video for that yet, your have to have the special tools

@ClementNaidoo-xg1ty Месяц назад

Hi, I do have the locking tools, but the cars timing still seems off maybe 180 degrees

@alfaromeonoproblem Месяц назад

@ClementNaidoo-xg1ty wow, that's a lot. What happened before that?

@5Dale65 Месяц назад

Hey Bruno can you tell me if a vacuum of -0,55 bar at the turbo actuator at idle is still acceptable? I bought a new original Pierburg valve for my 1.9 jtd 115hp and it is just like that, with the old valve it was the same. The pump gives -0,93 bar, at the Pierburg valve there is -0,90 bar. On the "OUT" port of the valve there is just -0,55 bar, sometimes -0,57 bar, but never the full -0,60 bar. In the scantool it says the Pierburg valve is open at 75% at idle. And the turbo acts kind of funny, there is a 200-300 mbar overboost all across the board, if I give it full gas it spikes up to 2400-2500 mbar absolute pressure for a moment, then falls back to 1800-1900 mbar, then again rises to 2400-2500 and falls back again. No overboost errors and check engine lights, but I can feel the changes in acceleration, sometimes it produces black smoke. The VNT lever moves easily when I unhook the actuator and move it by hand.

@alfaromeonoproblem Месяц назад

Hello. The vacuum numbers check out. That symptom is usually a bad solenoid

@5Dale65 Месяц назад

Thanks Bruno. But it does the same on both solenoids I have. Can it also be a problem with the actuator itself? Like the spring inside weakened over the years?

@alfaromeonoproblem Месяц назад

@5Dale65 do you have corrosion in your country?

@5Dale65 Месяц назад

Yes there is plenty of salt on the streets in winter here in Poland :( Cars corrode pretty quickly, my Stilo already had to have it's rocker panels replaced (stupid expensive). Do you want to suggest that my actuator might have rusted through?

@alfaromeonoproblem Месяц назад

@5Dale65 do a quick vacuum realise to check for that.

@last5783 Месяц назад

Hey, few days ago i write a comment with whining sound from brake pedal that was propably coused by brake booster leak, but some times when i shoot of engine it seems like problem with intake valve, when whole engine get earthquake like on video. Can it coused by leak in brake booster? Before this vid i think it was a normal that it shakes like this :D

@alfaromeonoproblem Месяц назад

I'm glad it did help

@marisoccoritore9772 Месяц назад

Se vuoi togliere o meglio risolvere problema del voano alfa devi mettere marca SACHS

@DashCamSerbia Месяц назад

Perque?

@alfaromeonoproblem Месяц назад

Cannot be. Only Valeo

@marisoccoritore9772 Месяц назад

@@DashCamSerbia Just Sachs parts for alfa romeo fiction For timbelt alfa.romeo Just Gates ultra grip. For shock absorber alfa romeo Just magneti Marelli o Sachs or bilstein . Etc etc etc

@DashCamSerbia Месяц назад

@@marisoccoritore9772 For shock absorbers I would choose Sachs. For belts Continental, Gates or Dayco. Don't know who is the OEM for the belts for Alfa Romeo.

@marisoccoritore9772 Месяц назад

@@DashCamSerbia if you Need OEM parts Cod write me and i tell you ...