Nokia WiFi Beacon 2 Web Admin Interface

Подписаться 18 тыс.

Просмотров 28 тыс.

50% 1

A detailed look at a Nokia WiFi Beacon 2 Mesh Wi-Fi wireless ethernet router (also repeater / node).
Shows the device and the web admin settings pages.
00:00 Intro and underside of the router showing label and power switch.
00:20 The UK power supply (12 volts 1.5 amps).
01:13 Inside the device (the circuit board with the cans removed).
01:47 The back of the router showing the LAN, LAN and Power sockets and reset and WPS buttons.
02:11 Plugging the router into power and boot up.
03:26 The power light process and colours and plugging the router into the internet.
04:30 The log in page of the web settings admin interface.
04:58 The front page of the web admin interface once you have logged in. Showing Network Topology and Devices connected.
05:25 The "Network Details" page.
06:30 The "Status" section starting with "Device Info" page.
06:49 The "LAN Status" page.
07:26 The "WAN Status" page.
08:02 The "WAN Status IPv4" page.
08:09 The "Home Networking" page which shows connected devices and their DHCP details.
08:46 The "Statistics" page showing packets and bytes counters for interfaces.
09:24 Moving onto the "Network" section of the web admin interface and starting with the "LAN" page where you can configure IPv4 LAN IP and DHCP details.
10:21 Network WAN settings page.
10:58 "Wireless (2.4GHz)" settings page where you can set channel, bandwidth, SSID and password etc.
12:39 "Wireless (5GHz)" settings page where you can set channel, bandwidth, SSID and password etc.
12:57 "QoS Config" pages for Quality of Service packet tagging.
13:25 "MESH" settings page.
13:57 "Maintenance" section starting with changing the administration password.
14:17 "Device Management" where you can give friendly names to devices on your network.
14:39 "Reboot Device" allows you to remotely restart the router.
14:43 "Factory Default" allows you to remotely factory reset the router.
15:00 "Diagnostics" page where you can ping and traceroute directly from the router.
15:30 "Log" page for logging on the router, when set to debug mode it is fairly detailed and may help you solve issues.
17:14 "TroubleShooting" section including "US Speed Test" and "DS Speed Test" (not very accurate!), latency and DNS tests.
19:26 "Port Mirrors" setting to allow you to mirror network port traffic to another port.
20:15 "Application" page starting with "Port Forwarding" settings. Showing how to forward ports or services to your network.
21:09 "Port Triggering" settings.
21:18 "DDNS" (Dynamic DNS provider) settings.
21:48 "NNTP" time server settings.
22:06 "UPNP" (universal plug and play) settings.
22:37 "Security" settings starting with firewall and "Attack Protection" settings screen.
22:53 "MAC Filter" filtering settings.
23:10 "IP Filter" filtering settings.
23:25 "DMZ" and "ALG" settings (application layer gateway settings for things like SIP/VoIP).

Наука

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@ianpriest3734 11 месяцев назад

Hi , Desperate question on your Paxton video , we have setup a Api but.. Setup a way of syncing our cards and people into paxton, with access levels. Keep this up-to-date every 5 minutes or so for when we issue new cards We can't use the CSV import, as it can't be automated. Also - we may have another solution using triggers inside of Net2. Is it possible to pass information to an .exe file in a trigger with Net2? For example the door ID and the token being swiped..?

@datractor 3 месяца назад

Strange, I can't get this screen through a browser but I can with the nokia mobile app. Any ideas? Through the browser its a dumbed down version with no admin settings.

@xpgdad 5 месяцев назад

Did you manage to find out if the LAN setting can be changed?

@weld3z 6 месяцев назад

Blue or Green 😅 TBH Tp-Link is my first choice, nice information. Thanks

@MrRHolm 6 месяцев назад

Fully agree on TP-Link. Any advice on how to use the beacons together with TP-link mesh as I cant seem to make them work in conjunction?

@nwajideobilevi3434 3 месяца назад

Hello please I need help, my nokia wifi app always give me an error when login into the app. It says "CONNECT TO NOKIA WIFI NETWORK" even though its connected already and I can't change the password of the router through the app, also I tried using the web admin but the domain I can see in your video isn't working for mine. Please has anyone had this issues and how did you fix yours? 😢

@nickrob5124 2 месяца назад

What u activate remote acces?

@NowrinKhan 6 месяцев назад

Hi, I cant change the pppoe in Network>WAN just like your showed in your video. Do u have any solution for that?

@freename 6 месяцев назад

The ISP who supplied the router may have locked down the interface/settings. I don't know how you would solve that.

@zacksparrow1073 5 месяцев назад

Hi, same here. I called tech support for my ISP and they told there's a second admin account built into the Beacon2, named "superadmin" with a random generated password. Once he gave me the password I was able to change every setting that was initially greyed out. hope this helps even if it's a few weeks late.

@flowmaintenance 4 месяца назад

Hi, how do i set it to be on just the 5GHz band... 5G that is

@freename 4 месяца назад

10:58 - untick the Enable on the 2.4GHz.. this will leave just 5GHz wifi working.. note that any terrible or low cost devices which only have 2.4GHz WiFi will no longer be able to connect to your network! (Things like heating controllers or old Roku TV boxes etc.). (Also 5GHz is not the same as 5G. 5GHz is the frequency the higher speed WiFi transmits on. 5G is a cell phone technology. 5G is not used in the Nokia WiFi Beacon 2 as it is not a mobile broadband service with a SIM card.)

@Toukou76 2 месяца назад

Hello, is it possible to install a VPN via this router? If so, what is the procedure to follow? Thanks

@freename 2 месяца назад

It is unable to host or connect to a VPN. You would need a different router or a second router doing your VPN.

@user-gu1nm7wf4v 7 месяцев назад

How to blocked any user from my wifi Nokia how should i do that same wifi i have

@freename 7 месяцев назад

The best option is to change your WiFi name and password and turn off the "WPS" button option on the router. Any other option is easy to bypass.

@AliW-bb8bc 4 месяца назад

How can I make it wireless extender please ?

@freename 4 месяца назад

Do you have a Nokia as your main router?

@ahmed7666 3 месяца назад

@@freename the same here how can i make it as an extender, for me it is not my main router i have oppo device as my main router ? please help

@freename 3 месяца назад

@ahmed7666 it won't be able to wirelessly extend from a router which is not another Nokia.

@orangejuicewithpulp403 Месяц назад

I have the same issue, were you able to solve this problem. My oppo router from zain is not compatible it seems. @@ahmed7666

@totallydbz 8 месяцев назад

hi, what does it mean if the router constantly blinks White, without connecting to the network? Have tried multiple times to add it to the Nokia Wifi app but it does not appear at all. Thanks!