Norwood PM 14 kenttäsaha. 

Thanks

Thanks nice to hear 😃

yes, a little raise is needed. The second rail is slightly off the base and needs support. now it didn't hurt, because those planks go separately to the planer

​@@klapisika914v

Thanks 😉

The chainsaw looks like a Dolmar brand, but is Jonsered. This spring, I will make a video going through the adjustments of the machine.

thank you. the saw is a Jonsered 2171 and the cubic capacity is 71CC. The sawmill was purchased from the uittokalusto.fi online store. find your local Norwood dealer at norwoodsawmills.com the blade chain is a special blade intended for splitting. you can find these types of blades in stores that sell well-equipped saws.

This facility is not built by me. The manufacturer of the device is Norwood.

U-Profile steel S235J2C+N 40X80X40X3MM 6000MM Yes this material has been suitable for this purpose. It is recommended to put a cross bar in between the profile to support it, so you get a stiffer structure. I don't have cross iron for support and the rails can wobble a bit, and that's not good.

Thank you for answer. I would like to use the rails elsewhere than at home, I'm thinking about a lighter version. What do you think about U-profile aluminium 40x80x40x4mm with cross bar. Will it be enough?

I believe that the aluminum structure will last well. Norwood advertises that normal aluminum ladders can be used as rails and they are much weaker than the U profile you mentioned.

@@klapisika914для подъёма/опускания пилы - можно использовать дрель или Импакт

in the next few weeks I will be sawing boards again and at the same time I will shoot a video of the saw

Exactly. The tree support should be adjustable. This would enable direct sawing and the best end result.

Ok

Thanks

I can't say. this is mainly a hobby and the boards come for your own use. I don't make boards for sale.

🤔

a list of dealers can be found on the manufacturer's website www.norwoodsawmills.com/fi_fi/?GA_adgroup=112164103845&GA_campaign=11713486031&GA_creative=482478894708&GA_device=m&GA_extension=&GA_keyword=lumberman%20mn26&GA_landingpage=https%3A%2F%2Fget.norwoodsawmills.com%2Ffinland-quote%2F&GA_loc_physical_ms=1005600&GA_network=g&GA_placement=&GA_target=&gclid=Cj0KCQiAjbagBhD3ARIsANRrqEu-8LOH0B0Qd4xpzIFLudSxKzcRAAPZ_0EXzFL9XtO-jOQmoEx19JwaAhWKEALw_wcB&BN%5D%20%5BFinland%5D%20%5BSearch%5D%20%5BPurchase%5D%20%5BGoogle%5D&

yes this is a good buy

You can inquire about the price on the NorWood.com website. there you can see the price for some countries. I have no information other than prices and availability in Finland. I do not represent the NorWood company, but I am their customer / consumer

I can't say how much this costs in Costa Rica. In Finland, the price is €1,290 without chain saw and saw rails.

The price in Finland without saw and ladders is 1250€

good morning. I couldn't translate your language and I don't quite understand your question. more information about the sawmill can be found on the manufacturer's website www.norwoodsawmills.com

You can inquire about the price on the NorWood.com website. there you can see the price for some countries. I have no information other than prices and availability in Finland. I do not represent the NorWood company, but I am their customer / consumer

thanks

How much thi😢mashine sold for TSH?

Yes it is

The price is around 1400 euros without the chainsaw.

Now I didn't get the question translated correctly. I think you meant to ask about the price of the saw. it is about 1400$

🤷🏻‍♂️

Thanks