NOT AGAIN!!! - Ford Explorer Sport Trac Exterior Door Handle Replacement

Подписаться 1,2 тыс.

Просмотров 50 тыс.

50% 1

What is there to do when your door handle breaks? Tear the door panel off and replace it of course!
Link to video transcription: www.roosterlif...
The Sport Trac has plastic handles that open the door. Some engineer somewhere decided this was a smart idea. While the factory handles can last if properly taken care of, any aftermarket replacement handle just does not hold up. That is why they are cheap to purchase. If you know your way around a wrench this job is a piece of cake. Although a heated shop would be nice in the winter.
This process should apply to all 2001 - 2005 Ford Explorer Sport Tracs. It may also apply to Explorers and Rangers of the same era.
Parts List: (Amazon Associates)
4 Pack: amzn.to/3mo4m46
Music: (Provided by RU-vid Audio Library)
"My Train's A Comin'" by Unicorn Heads
"Blank Holes" by Jingle Punks
*NEW Video every other Sunday at 2:00pm CST!!!!
*Follow us on Social Media - @roosterlifetv
*Visit our website: www.roosterlifetv.com
*Support us on our Patreon: / roosterlifetv

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@connormccollough2549 4 года назад

By far the best video on replacing exterior door handles. Great camera angles, footage quality, and he throws a joke or two in there which keeps the video interesting. Great job!

@cristymcgowan5690 Год назад

Every single one of my door handles have broken on my spots trac 😆. Thank you for the instructions!

@billspooks 4 года назад

THANK YOU...!!! At 1:43 is the part I needed to see...!!! I had no idea how to get this apart. I did not even know the yellow piece COMES APART. This solves all my problems. THANK YOU.

@h.m.sdasilveira5710 4 года назад

Good job, you make it look so easy.

@bayareaelectical 3 года назад

Wow. Wonderfully explained. I drilled the rivets out and put screws. Boom All done as instructed. Thanks.

@inspectorguru 3 года назад

Just fixed my mother in law door. Now she likes me even more. Thanks a ton

@tjhaywood100 9 месяцев назад

Just got done replacihng the front driver side outer door handle on my 2000 Explorer Limited. Not a terribly difficult job. Hardest part was getting the door panel back on. Talk about a PITA!

@nachyeisenberg8973 10 месяцев назад

🙃😊🤣🤩 my kids always tease me that over the past five years, There was never a time where all 8 door handles worked at the same time.😅

@jorgetoloza269 4 года назад

Wanted to thank you, just fixed my door...thanks again.

@leeklinetobe3818 2 года назад

U make it look easy . the ? I have is when u replace an inside handle and the door won't open from inside but it does on outside. There doesn't. Seem to b any adjustment. On inside rod , so do u use the outside rod to adjust ?

@jorgetoloza269 4 года назад

This is explained very well, thank you...

@wilbrochill Год назад

Thanks a ton man, local shop wanted $200 for the replacement. Told them to shove it.

@ulyssabuffett2884 3 года назад

Wow.. so, THANK YOU!!! Your walk through tutorial.. amazing.. I'm sending you one of those, "over excited handshakes with the half-hug/half-pat on the back" gestures 😂 Then continuing to over excitedly shake your hand with appreciation! Seriously, we had a horrible situation come up with an Explorer as my step father needed a favor for a friend of his, locked the keys in the car, then the handle broke... and he was pissy about it (wish I could shove that all plastic handle up his nasal passages)... Overly detailed moment short... you saved my butt. Thank you for your time! 👏👏👏👏👏👏👏👏👏👏

@vicentegomez205 3 года назад

Thanks for this video. Helped tremendously. I was lucky enough to find the same color sport trac at the junkyard with all 4 handles

@johnmoser2689 3 года назад

Good video....I feel your pain I'm tasked with the replacement of many broken parts on a gifted sport trac my father in law gave to my son

@chuckydubree1925 4 года назад

Just broke mine think I will order about 3 of these thanks a million for the video I will let you know how it goes

@yeahrightmate Год назад

You should use Dome head bolts (button head) so they are a lot smoother under the handle.

@haleymay6621 3 года назад

I wish i had watched this video b4 havin the shaft bent just to hook onto the handle lol.

@raulgonzalez6695 3 года назад

Thanks man it really hit was so help watching your video GRACIAS

@TCS86 2 года назад

Order the Mercury Mountaineer handles (same as sport trac) that are metal. Got mine on eBay, they never break & are totally worth it.

@mtalich 2 года назад

Thanks man great helpful video

@jonaleyvaglez9427 3 года назад

Next time we gonna need more light thanks for the video

@ozimafaamaoni3246 2 года назад

Thanks for this video 😊😊😊

@gagekilcollins7977 3 года назад

Great video thanks. It’s hard to tell with yours but my damn window parts are in the way.

@CStefek4 4 года назад

This was helpful

@silverdragontaylir8252 3 года назад

Genius

@2H2521 2 года назад

Have you thought about switching to metal ones? That should fix your problem.

@SoloRoosterGarage 2 года назад

I have tried searching multiple times for metal handles, with no luck. If you know where to find them, please post it here.

@flyboy721 2 года назад

@@SoloRoosterGarage I just replaced my driver's side handle for the third time and was finally able to find the metal Ford Mercury handles on 1AAuto. The part number is 1ADHS01625. The handle and throw arms are all solid metal. The only plastic part is the plate that screws into the door. They have the exact same form factor as the other handles I have replaced in the past. I hope this is the last time I ever have to replace it! Great video!

@2H2521 2 года назад

@@flyboy721 1AAuto is so ridiculously overpriced…

@flyboy721 2 года назад

@@2H2521 I agree. If you can find the metal handles from a different/cheaper vender, please share. Even with the higher cost I still would have saved money in the long run had I switched to the metal handles first rather than going through multiple cheap plastic handles. Just my take

@SoloRoosterGarage 2 года назад

I found a set of 4 on eBay for $85. Here's the item number: 371760757105. Amazon has a set for similar pricing: B079GCS5RJ

@sethmorgan5459 4 года назад

What size nut and bolt did you use?? Great video btw

@SoloRoosterGarage 4 года назад

I believe they were 10mm bolts and nuts, and around a 1 inch bolt length.

@sethmorgan5459 4 года назад

@@SoloRoosterGarage thank you so much man

@shytown2452 2 года назад

@@SoloRoosterGarage that was my question. How long of a bolt? Thank you. Great video!

@MrCharphead 2 года назад

So since I haven't done this yet to help prevent it from happening again you said to open it towards the side which is closest to the latch I'm assuming that is the right hand corner side? The latch I'm assuming is the part that latches to the frame

@SoloRoosterGarage 2 года назад

On the driver side it will be the right hand corner side. On the passenger side it will be the left hand corner side.

@ChanMan-mm7fe 3 года назад

Just fucking broke my driver side door.. This helped a lot.

@Anna8765 3 года назад

I’ve read on Amazon you can buy metal ones that work way better then these plastic ones. You’ll be buying less handles because the metal lasts longer. I just don’t know which one will fit

@trevonmitchell8163 2 года назад

Watched the video definitely gonna follow your steps, but I wanted to know where would I get a good deal on the handles? Any preference?

@SoloRoosterGarage 2 года назад

I made a follow up video to this one, going over the metal handle version. I recommend those, and a set will run $50-$80. I got mine off of eBay, they are on Amazon as well.

@tynessameyer2348 2 года назад

It's a great video. What do you do if the exterior and the interior are broken and the door will not open?

@SoloRoosterGarage 2 года назад

You will have to get the door panel off with the door closed. It's a pain, but doable.

@tynessameyer2348 2 года назад

@@SoloRoosterGarage thank you and I wasn't sure I'd be able to with out being able to open it.

@alejandroiturbide3964 2 года назад

How difficult is this when the door won't open on the driver side?

@SoloRoosterGarage 2 года назад

You will have to try to get the door panel off with the door closed. Stuff may break.

@madbeggar 2 года назад

I attempted this repair on a 2005 driver door but had to abort. The plastic clasp on the threaded rod seemed quite different than in this video. I could not flip it open, and repeatedly bent my 90deg pick trying. Revisiting this video, I now realize it's showing a rear door. The front door is much more crowded, and you can't see anything you're working on. I took a photo of the mysterious clasp with my phone - reviewing it now, and comparing it to this video, I think the clasp may actually be the same but upside-down (reversing the orientation), and positioned such that the clasp opening is against (and inset into flanges?) a hard metal piece - I can't remember exactly what, and the door is already put back together, but perhaps it was the window channel. I'm not sure how to get the clasp open with no room to insert the pick. Any ideas?

@SoloRoosterGarage 2 года назад

You may have to pull on the rod while reaching a pick to open the clasp. I used a pick designed for coolant hoses (thicker material for the pick).

@madbeggar 2 года назад

@@SoloRoosterGarage Yeah, in my case I was picking the wrong side (the rounded hinge side) because the clasp is oriented 180deg to the one shown in this video. I wish I could post the photo I took, because it's maddening!

@renebest317 3 года назад

This is so so helpful! Can you tell me what kind of handle you used? I've been trying to find the replacement parts, but there a re a few similar ones that I'm not sure would fit. Thanks.

@SoloRoosterGarage 3 года назад

This handle is also used on Explorers and Rangers, so parts are aplenty. I've tried multiple brands, all have been similar quality with none being great. I've had to replace these handles multiple times. You may be able to get a OEM quality part from a dealership, but price will be high.

@237g Год назад

Ahh, Dora the explorer I get it.

@natureboyswildlife2650 3 года назад

I have one of these vehicles. The handles on them suck.

@dramaticinc2006 2 года назад

Do you know what causes them to break so often, I've replaced 3 or 4 in the last couple years

@SoloRoosterGarage 2 года назад

I apologize for not seeing your comment sooner! I believe these door handles have such a poor build quality that the plastic material can't hold up to the repeated stress of motion, especially in the cold. They pump them out of a factory somewhere for pennies. I'm working toward a better solution for this.

@MM-gg3rg 2 года назад

Have you guys seen the all metal doorhandles? I've seen them on eBay and Amazon for @$65. Sure they cost a bit more, but they should last forever!

@freewave04 2 года назад

I replaced my door handle in 2019 when I bought the truck and agin today. Oof

@haleymay6621 3 года назад

Is there any other tool to use besides a pick to open the yellow clamp on the shaft?

@SoloRoosterGarage 3 года назад

It can be done with your fingers, possibly a flathead screwdriver. I recommended the pick because it is a hard to reach spot.

@LP-MeAndMyShadow Год назад

Just use anything that has a 90° bend that is small, and you get good leverage pulling. You could bend a 16 penny nail, get behind the yellow latch, then use pliers to pull. I used my phone camera to get a good look at the clip.

@billspooks 4 года назад

Another STOOPID IDEA From FORD. Just like their "phenolic" brake pistons that overheat and get STUCK.