looking for some help in connecting my MS20m to external midi... MPC2500 to send midi to KORG MS20m.... need to set the midi channel on the korg - anyone?
+MrBoxxed 1. Check that no patch cords are connected to any jack. 2. Connect a patch cable to the OUT jack of MVCA (MODULATION VOLTAGE CONTROLLED AMPLIFIER). The other end is not connected to anything. 3. While holding down the TRIG SW button, turn on the MS-20M. 4. While the STANDBY ON LED blinks, press the TRIG SW button the number of times corresponding to the desired channel setting. If the button is pressed 16 or more times, the channel will be set to 16. STANDBY ON LED repeatedly blinks the number of times corresponding to the channel setting. For example, the LED repeatedly blinks "* * -- (on, on, off)" for MIDI channel 2 and "* * * -- (on, on, on, off)" for channel 3. This process can be repeated to change the setting as needed. As the factory default, the setting is channel 1. 5. Check the blinking pattern of the STANDBY ON LED and, if the setting is correct, disconnect the patch cable from the MVCA OUT jack. The specified MIDI channel is saved, and the MS-20M is automatically turned off. 6. When the MS-20M is turned on again, it will use the specified MIDI channel. TIP: The MIDI channel setting is saved, even when the MS-20M is turned off. TIP: When changing the setting, do not turn off the MS-20M before disconnecting the patch cable from the MVCA OUT jack. Otherwise, data may be corrupted or the device may be damaged.
+Nova Musik thanks heaps... Still having trouble with step 2. Where is the MVCA out? It's labeled differently right?? Is it to the left of the on knob.... Or 2nd row from the tops 2nd in (modulation generator out) dam it I can't find it. Manual has no diagram.