NOVRITSCH SSG-10 Review after 3 Games 

check, check, check......oh and check

I just ordered mine too. My first personal purchase.

How is the ssg10 guys?

Jose Antonio it’s super good, I have an ssg10 a1

How is the ssg10?

Jose Antonio go on his channel there’s a lot of vids of it

I just watched ur review 👍

A little bit late :p but i use a warq helmet for the same reason and i already thougt about buying the a2 stock because of the removable cheeckpad. I was not 100 procent sure if it was possible to remove it but now i know it for sure. Thanks :) do you still like the sniper after 2 years?

@Grady Betts never accually had any problems, i just use the weight that's recommended for the spring I have in my rifle

@Grady Betts I really like it, shoots like a laser, and always hits straight on target.

you cannot trust anyone you don't know. Use my input as you like. :)

buy a tac, youll find version at the same price. Its just a superior platform.

Not exactly but at some point it will probably come.

@@JosefMucha100 Now waiting for the CO2 magazin for the SSX Project 😁

Don't get anything from Novritsch, everything he sells is just rebrand and marked up cheap guns. SSG24 is the "best" thing he sells and it's just a Modify M24x, the Modify USR150 is $30 cheaper and so much better than the SSG24. SSG10 is nothin gbut a JG BAR-10 with a bucking in it. If novritsch got into GBBR He'd likely do what he does and pick something shitty and old like the KWA piece of shit LM4. Which is complete shit. Just pick up something good, a VFC M4, Vipertech M4, those are your best bets. Other good buys are the VFC UMP45/9, VFC MP7, TM MWS. You can get a WE but I only suggest that if you are willing to buy a ton of upgrade parts otherwise you will be replacing triggers and hammers and parts out. A WE M4 or MSK with a Z-Parts trigger group will last you ages. Also, get PDI-W Hold 50 degree buckings, they're better than the maple leaf by quite a noticeable margin. Maple Leaf is about the best thing you can but that's not a PDI-W hold, but... why get the maple leaf when the PDI-W is better GHK is a decent option but only if youa re willing to invest into Hephastus internal upgrades. Otherwise they suffer from the same issue WE has, soft pot metal internals. And if you are playing every single week that will wear out fast. GHK can be really good with Hephastus parts, similar to how a WE can be good with Z-Parts & Angry Gun internals. Z-Parts makes ENTIRE conversion kids for the P90 that replace the entire trigger box etc. GHK is really your only option for an AK though. The WE AK-74 has some upgrades but the trigger box itself can wear out... and the GHK have better externals. But yeah, personally I run with WE stuff becasue I like to punish myself. If I was smarter I would just invest in a ViperTech already. The best airsoft guns ever made. ViperTech are beyond anything else being made, period.

@@ErgonomicChair im gonna buy a WE PDW open bolt short barrel version for 250 bucks with 3 extra mags, do you have advice and websites wheere i can get spare parts just in case it wears out/breaks plz ?

@@odindouteaux2283 For sure! For any and all stock parts you need KY airsoft has you covered you can literally buy any single piece of any WE gun ever made from them! If you don't see it just message them and they'll get it for you. If you want upgrades to future proof and get steel parts, KY has a few but the best place (most convenient) is AST (AirsoftTaiwan). AsiaAirsoft often has WE upgrade parts from RA-Tech, Zparts, etc as well. Also Tiger11, hobbyking, carry a lot of WE upgrades.

Aged like fineee wine

Už mám docela srach až to na mě bude mířit v Ketkovicich 😀

Don't, it's just a JG BAR-10 with some aesthetic changes. Get a JG BAR-10 for $200 less and put a PDI-W Hold into it. Will shoot better than the SSG-10.

Yeah, I changed my mind since I made that comment. I learned more about his stuff and I really don’t believe in his products anymore.

@@cactioperator8709 Whew! Good good, I tr yand save people from the Novritsch rabbit hole and tell them they can buy either better, or the same thing for cheaper. A guy I know quit airsoft because of his SSP1 always busting and then his SSG24 was getting outshot by my GBBR and my shitty little AEG and I tried explaining to him, it's all in the bucking. He was really upset he paid that much to under perform.

ErgonomicChair yeah you’re a good person for trying to help people. Most of them dont know better and that’s now nov makes his money. I saw his vid on his new aeg and saw everyone in the comments really exited and I feel bad for all on them

@@cactioperator8709 For sure :/. I am trying to direct people to better AEG's. I really only try and dissuade new people, the "veteran" airsofters will ignore anything you say and have bought too much into the koolaid. From what I saw his AK looks like a Krytac almost, and I am betting it'll be a good $150-200 more.

Sorry, I don't like the looks of G36.

Is it good? Like when you aim the crosshairs, does it go where it’s aimed?

@@greg.gallmann3001 just perfect out of the box, no trouble from my side, works as intended. 0.46 gr BB used. (SSG10 A1)

Pietblues thanjs

@@Pietblues 2,8 or 5J?

Meant to be played. Great Gun, light weight, precise and reliable. No complains, ooB ready.

internals are not cross-compatible

Thanks! No, it's two different rifles.

Ok cool, my next question is since the ssg10 is VSR compatible does that mean I can slap the ssg10 upper assembly into a VSR10 M40A3 lower stock ?

@@donavan0404according to nov, yes, since he told ssg 10 is full vsr10 compatible. Looking allso for nice wooden stock for mine ssg10, when it someday arrives.

Have had a ssg24 for 2 years, a big fan of it. Also have a SRS with heaps of upgrades, like lighter weight and quieter srs. Ssg24 better for bolt pull and harder wearing then my srs. Looking at the SSG10 A1 as a quiet light weight accurate combination.

I'm not investing into WE ratech triggerbox. At that point you can just buy VFC or GHK which I did. VFC review will be next.

you mean let me win it

no me.

I will Go for the 5 joules because i want that extreme power for training my aim and for shooting at things

@@IceElias I just got mine. The 5 joul spring is VERY stiff. Tough to pull back with one hand. FYI...

@@bikebudha01 really? its that tough? I see people do it all the time? I was thinking about getting the ssg10 with the 220 spring to plink in the back yard. do you have toothpick arms?

@@FalcoINC I bench 275, so no, I don't have toothpick arms. But in most of the sniper videos you'll see the sniper with the gun up against his face, then slowly pulling back the bolt with two fingers between shots. The 5 joul spring that came in mine was so stiff I had to unshoulder, put the but of the gun against my thigh for leverage, then pull the bolt back.

@@bikebudha01 Lol I get what your saying I just feel like it shouldn't be THAT hard to pull back. Maybe it just takes some breaking in? If you watch some of Novritsch's videos where he's using the heavy spring to explode cans and stuff he pulls it back easily with one hand. Have you tried disassembly to check if there is something causing unnecessary friction or something?

Do you have a TM VSR-10 or one of the clones (like JG BAR-10)?

@@johnfaustus1 one tm and one custom made. I still stand with what I said : Novritsch should have stayed with the ssg 24, maybe it would have help the industry to move away from the vsr platform. The vsr platform is not the best because it’s the best platform in it self, but because the industry/community has developed through the age the best aftermarket parts (especially on the hop up part). The industry make almost only aftermarket parts for the vsr because people only buy vsr, and people buy vsr because this is the most supported platform. At least silverback has managed to make the srs/tac a real (and for me the only) alternative platform.

@@Uria-jz1gu I agree - it does seem like a self-sustaining cycle we've been in with the VSR. I've heard good things about Silverback products - they are next on my purchase list.

Wut

You always have to adjust the scope but it's very easy. No need to be worried about that.

Ahoj, diky! Je lehce upravena aby sel trigger box do ni a tlacitko zasobniku ma kovovou vlozku. Mela by jit ale upravit v pohode.

@@JosefMucha100 Díky moc za odpověď a přeji úspěšný rok 2020.

One of the best options, but I chose VFC. Video coming up.

RQ Airsoft how does it shoot?!

EP_Aesthetics it shoots fine performance wise, but it’s just a bit scratchy.

RQ Airsoft id email the novritch team

EP_Aesthetics Ok thanks for the help!

RQ Airsoft no problem! Would like to see a ssg10 review!

for me, both are nearly equal but the SSG10 is newer. I like SSG24 mags better though.

I put the shelf there. It's safe, trust me :D

Way better than anything else if you ask me. GBBR is a new world if you have never used one before (or realsteel one).

@@JosefMucha100 I have fired real steel, I just wondering how consistent they are due to temperature changes and what I should look out for when planning to buy one

@@adamd1738 they are fairly consistent in my opinion. WE is the worst when it comest o low temperatures, VFC and GHK are superior and also more expensive. If you can afford it, get GHK or VFC (as for the model, I have experience with AR15 so that's what I would recommend at the moment.)

I've not done this and am no expert but sounds to me like you should buy the 2.8 and fit the optional Air break pins. This will make the gun much quieter and the downside (for most people) is it will reduce FPS a little. I don't know exactly how much but by sounds of it should be perfect for you as it will likely drop it down just below the 2.7. Post a message to Novritsch and ask if this will work.

Get the 2.8 and cut the spring. That's what I would do.

@@JosefMucha100 I'm not sure but are airsoft weapons always min. 0.1 Joule lower then there are declared?

Yes there is the bipod stud.

You would be surprised at how well scopes hold their zero. Depending on quality of the scope obviously. But I dropped .270 out of the tree I was deer hunting in, got down, went back to the cabin (because I didnt want to risk my scope being off and wounding the deer) and low and behold, I went out back fired one shot at a target and it was still dead on at 100 yards

Yes no problem.

I think it would only make you feel better. That's it.

Realne je ssg24 srovnatelna. Obe funguji dobre a jsou presny.

it's not that price anywhere i've seen...try moving

That depends on your field limits.

@@JosefMucha100 thx for the info

TheN3ckol just buy a jug bar 10 then and upgrade it. Been there done that. It fell apart internally and now it has a Wolverine hPa unit in it.

@@willieaway I have full custom 1300$ vsr already :D Im just getting nervous because of that bullshit

It comes without a scope so you can buy any sight that can be attached to a picatinny rail

If you're handy, I suppose you could cut a picatinny rail, weld it to a kind of clamp to clamp around the end of the barrel, for front sight mounting and buy some cheap iron sight sets off of ebay. Just make sure the front picatinny is relatively well lined up both horizontally and vertically with the rear picatinny over the receiver, and you should be fine.

VFC Saber (AR15). Fully upgraded with custom parts. Video coming up and it's gonna be interesting.

I've received two SSG10s in the past year and neither had the issues you mentioned, and i also took both apart...anyone who looks at the internals can tell it's not a rebranded product

@@helisoma What the hell are you talking about? You're outright lying, several internals on the SSG-10 are BRANDED with JG item numbers and product codes... have you never tech'd before in your life? You're completely lying. The SSG-10 is a JG BAR-10, the rest of Novritsch's products are ALL REBRANDS he does not have a factory, they do not have a production facility. They outright and completely lie about that. Hence why he lost the licensing fo rthe SSG24, because Modify was pissed off Novritsch claimed HE ENGINEERED IT. He was not allowed to make that claim. So once the license ran out, Modify didn't renew it. It's also why Modify broke their deal and began selling the Modify M24 USR150 in North America and Europe (which has actual internal upgrades btw) when Novritsch only had a license for the M24x which was the Taiwanese version, but he put a 150 spring in it. HENCE WHY IT CAME WITH A LOW POWER SPRING. Even Dayton from house Gamers has gone on camera and said Novritsch is just rebranding, even Airsoftology has stated that the SSP1 is just a rebrand though he didn't state it was a KJW but he said "Novritsch would be angry if I told you the gun this is..."

DUDE save your money... get a JG BAR-10, it's the SAME GUN without a few external modifications. Get the JG BAR-10, buy a PDI-W Hold bucking. Then pick up a few EdGi or PDI modifications in a year or 2...

@@ErgonomicChair to be quite honest with you the main appeal of the SSG is that it's already pretty much upgraded soooo I'd need to check what upgrade i'd need to make the JG be on par with the SSG10

@@Mrpivot34 To the same as the SSG10? Just the bucking if you don't include the aesthetic changes. Other than that there are no actual upgrades beyond a few tiny inconsequentials that don't end up improving anything. To make something better than the SSG10 though? EdGi or PDI Hop up Chamber,. PDI or EdGi steel trigger set. PDI-W hold bucking. That's it. You can get a PDI, EdGi, or Lambda barrel too and it is that much better. EdGi and PDI unlike Novritsch actually are engineers who have tool lines and put in tens of thousands of dollars into R&D. There are many, many, many guides about upgrading the BAR-10 with PDI/EdGi/Lambda parts. Angry Gun I believe makes a few bits too. The biggest upgrades are the trigger and hop up chamber. PDI makes a 2 armed hop up chamber that is the closest thing to precision hop up adjustments that exist in Airsoft. The main reason I am warning you away from the SSG10 is how... shit condition they are in. I've had to outright rebuild one for a guy local here, screws weren't screwed in, the gun case it came in was smashed to shit even though the shipping box was fine meaning Novritsch put it into the box destroyed. And I've seen pictures and reports of other people seeing the exact same thing. I've had to work on two of them so far. Both had loose and wobbly chambers. So my money is on Novritsch simply knew Mucha was going to do a video review on it and gave him one of the quality assured SSG10's. Like seriously, the one I had to rebuild with EdGi parts ($300 so, pricey, but the best thing you can get next to PDI imo but other techs argue EdGi are better. Tbh, I think they are pretty even but PDI have some features that are just on another level!) - - the cylinder didn't have its nozzle secured to the gun and among other issues like the trigger was wobbly and not pinned correctly. The Entire thing was a mess, whoever assembled it left so much unsecured and the inside fo the chamber was scratched so they actually TESTED it and tried to bolt it. There was a set screw inside that wasn't fully in and it was scoring the shit out of the interior. That SSG10 was a nightmare. The other wasn't nearly as bad but the entire chamber wobbles and barrel assembly so I had to get creative and make a few extra screws to hold it down into the stock... The SSG10 is an embarrassment in my eyes. And I am not stranger to budget guns! I use a lot of WE GBBR's, hell WE have really fantastic engineering but they just use shit materials to build their things so I enjoy them design-wise but... yeah. So I know and I use budget guns. But the SSG10 is not a good buy.- I cannot caution you away from buying anything from Novritch hard enough. Even the SSP because all the SSP is, is the old out of date KP-05 IPSC. Which is inferior to the modern KP-05 which has more steel internals and a TM compatible hop up chamber along with an upgraded back safety. This is why the SSP's back safety busts so often and you can't change out the bucking easily. Because the bucking is nothing but a purple-dyed stock KP-05 IPSC bucking. Like that's the issue with Novritsch. He doesn't build a single thing he has no engineering degree I could find either. The SSP is nothing but the KP-05's base, with the KP-08's dust cover (grips), and the KP-06's top slide. But he just licensed the old out of date KP-05 so it's all trash compared to the new KP-05 and it's like $150 more than a KP-05. So it's like, why could you buy; - SSG24 when the Modify M24 USR150 ischeaper and more modern/upgraded - SSG10 when the JG BAR 10 is so much cheaper you can use the money for BETTER ugprades - SSP when the new KP-05 is superior in durability and upgradeability - SSX23 when the MK23 it uses is only worth $50 USD with a Hadron TDC hop up $15 and a Maple Leaf bucking $8? Actually, there's some merit to the SSX since the MK23 it uses (the name escapes me, it's not he ASG but it's the other one. Not TM) are very hard to find in North America. So it's overpriced but they ARE hard to find at least. THe only thing worth buying in Nov's shop are his SSG24 magazines because they're better than some of Modify's magazines. Though the new USR150's magazines are better, and they have built in LED's for tracers. ANd they are cheaper... Novritsch is just kind of a shady guy who sells extremely marked up and old guns that companies no longer make. KJW doesn't even support the old IPSC KP-05, Modify has moved on to the USR150, the JG BAR 10 is still made but there are better more modern versions of it out there too. Some JG BAR-10's come with the exact "upgrades" the SSG10 has except bucking. But even then a PDI-W Hold bucking is better than the autobots. They are at least competitive with each other but the PDI-W hold is objectively better at the end of the day and doesn't ask you to get a concave bucking.

@@ErgonomicChair no 25 year warranty tho

@@helisoma Try and take them up on that warranty. Welcome to 6-10 month long wait times as they wait for their suppliers to send them factory OEM CYMA/JG parts, or them simply stating "there's no ETA" on replacement parts. KJW focused on the KP-05 and stopped making KP-06 and KP-08's for awhile and NO ONE could get a SINGLE back safety or trident spring for the SSP1. I had THREE customers waiting for faulty parts to be replaced for the SSP1. I have videos of the JG BAR-10's I've had to fix because Novrtisch offers ZERO support. That 25 year warranty is the most bullshit warranty I have ever seen because he has ZERO ability to honour it.

it thrives with 0.46g bbs...you could run 0.32g but it's just a matter of lighter bbs being more susceptible to cross winds

They are 300 bucks…

As for 299€, ssg10. Much better value than ssg24. Ssg24 price comes mostly for custom parts made especially for it, example really solid stock. Ssg24 is good gun, but for 299€, there is no question that ssg10 is winner.

Ken Dia the a1 is said to be based of the m700 but I don’t know about the a2

A2 is a modern m40 variant

BiGeThMaCdOnAlD C 5 is claimed to jet 700fps which I’m pretty sure is illegal at most fields

Josh Stringer alrighty thanks so I will just choose the next one down. Thanks

Looks to me like the Novritsch scope. 3-9x50mm, Illuminated Reticle. It's fitted here with the scope extender and a Runcam scope cam.

novritsch scope. Works just fine.

for different lighting. Make it look a bit better. That's it.

@@JosefMucha100 ok I approve

Phil Bivins i think it’ll do more then give it a run for its money