The manual says that when you save a loop that everything will be saved to the memory slot you choose, I can get it to save the loop but NOT the drum track. The only way the drum track plays with the loop is if it's selected and I have the rhythm button engaged while the loop is playing. So how do you get the pedal to save the drum part WITH the loop? Please help, your manual is VERY vague and I'm at my wit's end. Plus no other tutorials on here clearly demonstrate how to accomplish that. Please and thank you! If need be I'll call someone at NU-X and have them walk me through it. Whatever it takes, again thank you. Please help!
its a great demo, it shows you everything it can do,and the drum sound is good. it can be a little bit more difficult to figure what these things drum loopers CANT do until you buy them , I bought a similar pedal by a different brand and in sync mode ( independent mode is difficult to operate ) to stop your loop you have to stop the drums too,so I feel songs with a middle 8 are out of reach to perform to an audience, im basically stuck with verse chorus verse chorus.....any thoughts /experiences anyone can add ?
I heard you can only save while the music is paused.. is this true? And if so can you play for instance 4 loops in the same directory and then save them afterwards? or is you're chance of saving the first three lost then.
Saludos. Estoy muy interesado en comprar el looper core de luxe y quisiera saber si se puede conectar otro instrumento mas, teclado por ejemplo, con un conmutador A-B/Y , o un micro a traves de una mesa de mezclas. Gracias
Mine's out has a contact fault. The mother jack is not precise I guess. I tried it with more cables. Itjust sometimes loses the connectio to amp, I must touch or move a bit to get signal through again. Annoying
I had the same question. I bought the pedal. I learned that unfortunately, if you connect the external switch box with the 2-conductor cable, you can use the A button to stop, and B button to tap tempo.. but connecting this way, you loose the ability to select the phrase on the remote buttons - you need to use the 3-conductor cable for that (A up, B down).... A serious problem for use in a live situation. These NUX pedals have excellent technical capabilities, but some poor decisions in the interfaces limit them - especially for live use.
Hola el pedal es buenísimo!!! pero lamentablemente dejo de funcionar, alguna idea donde podrían repararlo? gracias! / Hi the pedal is great!!! but it stops working, any idea where can repair it in argentina, thanks
@@MegaMustaine87 hola no lo pudieron reparar en varios lugares que se dedican a eso por qué está en corto en una parte del circuito que no se puede reparar... Me duro unos 6 u 8 meses... De todas maneras creo que tuve mala suerte... Si no estuviera tan caro lo volvería a comprar... Tengo otros pedales de la marca y funcionan de diez.
What kind is the extension pedal? Is it a momentary switch (like the one on the loop core), or one that clicks? Can you suggest me a compatible footswitch from AliExpress? 😬
Loop Core Deluxe vs Original Loop Core: * Better recording sound quality (24-bit vs. 16-bit) * Longer recording time (8 hours vs. 6 hours) * Upgraded drum machine with more realistic drum sounds * Equipped with NMP-2 Dual Footswitch control pedal for ultimate user experience * Frequency compensation & cabinet simulation
I have a digitech Jamman, and when all loops are empty and phrase 1 is recording, hitting phrase up does nothing. It is the same result as not hitting phrase up. It seems that when phrase 1 is recording, hitting phrase up should set the end-point/stop loop 1 and start recording loop 2. I am wondering if the Nux Loop Core can record an intro, verse, then chorus, and then switch between them using the phrase up/down switches.
Thanks for your reply, but that video does not show switching loops while recording. I am not asking about playing or dubbing loops. That is why my question began with "If all loops are empty", as you cannot play an empty loop, nor can you dub onto an empty loop. At 3:04 in this video, you are recording. I am asking what would happen if you hit the B button of the NMP-2 at 3:07?
I am not asking what would happen if you hit the B button of the NMP-2 after 3:09. At 3:09 you hit the foot switch on the Loop Core pedal causing the end point of the loop to be set, exiting recording mode, switching to the beginning of loop 5, and entering overdub mode. At 3:09, you are no longer recording, so hitting the B button of the NMP-2 after 3:09 would not answer my question.
nux looper i have big throuble with start, stop , clear and undo it is complicated and conect one outout on eff pedal and one on mixer it do not work no more nux ...! i ask my self why additional pedal it is not functional! it go in garbage ! Prank