O3 tinywhoop? GEPRC Darkstar review

Подписаться 5 тыс.

Просмотров 4,5 тыс.

50% 1

Visit: www.nordfpv.com
Small drones are fun, specially during the cold and rainy days where you want to keep practicing, flying, and having fun but the weather is against you. And is not secret that DJI has been terrible at giving FPV pilots the chance to enjoy indoor, tinywhoop kind of style fun since they have never created a small enough VTX.
But manufacturers are finding work arounds, and in this video we will see if GEPRC idea with the darkstar will provide the same kind of fun as when flying a walksnail, HDzero, or even analog tinywhoop indoors.
The GEPRC dark star can be found at: nordfpv.com/products/geprc-da...
The mobula6 HDZero can be found at: nordfpv.com/products/happymod...

Опубликовано:

31 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@kurtzFPV 6 месяцев назад

You are right. My 03 pavo pico is soley to use as a small camera for indoors or very close to people. The smallest fun 03 in the sense of freestyle is a 3" I built from a coverted crux35. Since I really don't want to spend money on multiple digital systems, I'm still analog on my whoops and I'm ok with that. I have a 75mm whoop with a naked vista, but I seldom fly it. It's analog mobula6 in the house for me too for the real fun.

@jinchen9937 6 месяцев назад

This tech review is really useful for pilots😘

@NordFPV 6 месяцев назад

Glad you think so!

@amay8282 6 месяцев назад

Thanks for the review! Good info. How loud is it?

@odinata 6 месяцев назад

Great question! Would have loved to see some non-FPV footage of the thing in flight, with audio.

@NordFPV 6 месяцев назад

Good question and yes it would have been good to show it in the video. It’s actually not that loud. A bit louder than the mobula but not that much.

@spacemonkey986 6 месяцев назад

With the WTFPV version does it come with a prewired DJI O3 HD cables that plugs into the DJI 03 or do you have to obtain and solder a cable?

@NordFPV 6 месяцев назад

The cable is there already soldered as shown in the video. You just have to plug it into the O3.

@gabesz_fpv 5 месяцев назад

Very great video, thank you. :) Is it possible for me to ask for the factory Betaflight CLI backup this O3 version? Unfortunately, it is not possible to download the CLI Dump on the geprc page. :/

@NordFPV 5 месяцев назад

Hello. I'm asking GEPRC to put it in their website. I'm not sure why is not there. If they you check in 3 days and is not there yet, feel free to email me at info @ nordfpv . com and I'll copy and paste mine for you.

@ZerkalSergei 5 месяцев назад

Hello! I also lost the factory settings of the drone and GEPRC support is not responding, I wrote an email. @NordFPV

@gabesz_fpv 5 месяцев назад

@@NordFPV big thanks ❤️

@allenhoffman4753 3 месяца назад

Does anybody know what the HxWxD dimensions of the battery cage are? I don't have one of these yet but I've got some 2s batteries lying around that still work perfectly fine. Mine are 19mmx12mm. Has anybody used calipers on it yet?

@NordFPV 3 месяца назад

Hey. I just measured it. It’s 16.7x14.6mm

@wilmerpazos81 3 месяца назад

I just bought the geprecdark star 20 and y cannot flash it. When i tried to do it trough wifi mode, it appears that the receiver is beta fpv 2.4 nano. I dont know what firmware set up, if it is elsr beta 2.4 nano or geprec 2.4 nano as the manual said. What do you suggest or how can i do it. Tks a lot

@NordFPV 3 месяца назад

When you connect WiFi to the receiver it should say the model and version. I doubt a new drone from Geprc will have a betafpv receiver…

@wilmerpazos81 3 месяца назад

@@NordFPV of course, it seems to me very strange, but it is what appears when i connect the wifi of the receiver. Im very confused

@NordFPV 2 месяца назад

that's weird. But open the drone and check it. The betafpv rx has the betafpv name on the board. The GEPRC doesn't have any name.

@anthonymoldezfitness3048 24 дня назад

Hey NordFPV, thanks for this nice video! i just bought the same like yours, ELRS 2.4G version, but is it compatible to my Dji controller 2? I can't seem to make it work. After installing the 03 unit from my pavo pico to the Darskstar, i set it to to the right Ports plus Serial(via UART) and SBUS. But until now it's not responding to any stick movement. Do you have any suggestion? really appreaciate it a lot.

@NordFPV 23 дня назад

Hi. Thanks. Normally the missing part is the SBUS and GND cables from the O3 to the AiO. Do you have them? The ELRS version has a stripped down harness missing those 2 cables. If you do have them, check the port configuration and check that the SBUS is actually connected to the right port.

@anthonymoldezfitness3048 22 дня назад

@@NordFPV you're right, there's only 4 cables 2 are missing. But, can i still make it too work? do you have any suggestions how?

@juancgallardo 22 дня назад

Of course. You just need to install those 2 missing cables. Either in the harness or soldering outside.

@anthonymoldezfitness3048 22 дня назад

@@juancgallardo ok so it gets complicated, haha i do not know a single thing about soldering, guess i need to go to any electronic shop here and get it done. thanks though!

@NordFPV 22 дня назад

You may want to try just to add the cables to the harness. Check if someone has the cables already crimped and get them from them. That will be a very easy way to fix it IF you have those cables. Otherwise I will recommend you to start learning to solder, you will do it a bit in this hobby and it will get expensive quick if every time you need to solder you go to some service.

@NaorFPV 6 месяцев назад

Love my Cinelog 20 4S :-)

@NordFPV 6 месяцев назад

I thought about comparing those 2. Maybe in a different video. What do you think?

@NaorFPV 6 месяцев назад

i would love to see what you think. i think 4S is better and you will not lose video if you go on the battery. and for outdoor @@NordFPV

@tato5479 6 месяцев назад

@@NordFPV❤

@Blitnock 6 месяцев назад

What would be helpful would be to compile a list of batteries that are compatible with this quad. I have the same problem as you: my 2S batteries are just a tad too large. Anyone here know of some batteries that actually fit?

@NordFPV 6 месяцев назад

That will be a good idea. GEPRC has one that fits, but I don’t normally have their batteries

@Blitnock 6 месяцев назад

@@NordFPV Do you know the name of that GEPRC battery? Outside links don't usually work on RU-vid, so the battery name would help. I just checked their site and only saw 1S and 3S batteries, but no 2S batteries. Also, some weeks ago I saw another review of this quad that did discuss compatible batteries to a small extent. One reviewer suggested cutting off the plastic battery holder and using a velcro strap for the battery; I have some small straps, but I'm a bit nervous about doing this. I probably shouldn't be, lol. But yeah-- the battery mounting issues with this quad are a bit painful. Thank you for sharing your review.

@miloschjovanovic 4 месяца назад

I have ordered some from their website. My 2s batteries fit in but they are probably crap because drone is very hard to control and flight time is 20s @@Blitnock

@odinata 6 месяцев назад

You don't have to tell us why this drone exists. And holding it in your waving hands while you talk about the philosophy of all kinds of different drones, swing it to rapidly to get a good look at it, all the wile having some stock porno music playing in the background is a waste of time for us, if not for the guy with more money than sense and a bunch of expensive studio equipment he needs to put to use creating influencer content.

@NordFPV 6 месяцев назад

So I’m guessing this is your way to say you didn’t like the video? 😂 If that’s it, I’m sorry it didn’t satisfy your expectations but thanks anyway for watching it.