Тёмный

OEM 1M CONVERSION! (PART 2) EXHAUST, BATTERY AND WHEEL FITMENT! 

Thic Whips
Подписаться 151 тыс.
Просмотров 19 тыс.
50% 1

My 135i Build Sheet (Includes 1M Conversion): tinyurl.com/3uphrbr3
Shop Bmw Parts: www.thicwhips.com
My Wheel & Tire Fitment Directory: tinyurl.com/yyftysns
--------------------------------------------------------------
Discounts and Codes: tinyurl.com/5n92k9m8
ThicWhips Merch, Apparel & Decals: tinyurl.com/yvpwrra7
Thicwhips Facebook Group: tinyurl.com/m4r294c
--------------------------------------------------------------
My Social Media Profiles: hoo.be/thicwhip
List of 135i Modifications:
Interior Parts:
OEM ZHP Shift Knob - tinyurl.com/2ucmrp2t
OEM Alcantara Shift Boot - tinyurl.com/3f2f7mje
Center Console Cover - Rear - Black - E82. (Arm Rest Delete) - tinyurl.com/523wa9df
Genuine BMW Console Insert, Rear - 51167135455 - E82,E82 1M Coupe (Arm Rest Delete) tinyurl.com/2k4kz55n
Custom Steering Wheel by AzaAutowheel - Code “THICWHIP” for $50 Off! tinyurl.com/ym684hrd
Recaro Pole Positions (Alcantara / Leather) All Black - tinyurl.com/48uny6xt
Recaro Sliders: tinyurl.com/233xxfr7
Macht Shnell Floor Mounts: tinyurl.com/2uuy4vjp
VAC Seat Belt Adapters: tinyurl.com/bdhyetay
Bimmertech Alpha One Speaker & Amp Upgrade - tinyurl.com/2nav4jfx
Coby Wheel 1M Alcantara Cluster Bezel - tinyurl.com/2dd9vvp3
Headliner Blackout Kit - amzn.to/3tA6zkV
Induktiv Wireless Phone Charger (5% Off Code "THIC") - tinyurl.com/4ya2dwvt
Exterior Parts:
Apex VS5RS Motorsport Gold & Satin Black (I have two sets) - tinyurl.com/fxa6w7dv
Suvneer Carbon Fiber Front Lip & sideskirts - tinyurl.com/4ktmhdtw
51-16-8-051-913 Genuine BMW M Mirror Assembly - Left - E82/88 - tinyurl.com/55n64f49
51-16-8-051-914 Genuine BMW ///M Side Mirror - Right - E82/88 - tinyurl.com/mr4ywr8z
51-16-8-046-507 Genuine BMW Mirror Glass - Left - E82/88, E9X M3 tinyurl.com/5n993b9y
51-16-8-046-508 Genuine BMW Mirror Glass - Right - tinyurl.com/y9wz333p
BMW 135 Headlight Repair Kit (OEM BMW) - tinyurl.com/cysrvwc8
Hood Latches - amzn.to/3Enb5pl
Seibon Carbon Fiber Hood - tinyurl.com/2p95bf8r
OEM Black Kidney Grills - tinyurl.com/yeytze3f
Performance Parts:
17117602241KT - Auxiliary Radiator Upgrade Kit - tinyurl.com/msvry8rw
46206 - Supersprint Stainless Race Muffler - tinyurl.com/2379brvv
BMS Catch Can - bit.ly/3tTlMd3
ECS Billet Oil Filter Cap - tinyurl.com/mrxfnfn5
Doc Race Intake Manifold - tinyurl.com/mrjcy3ut
Motiv Reflex - tinyurl.com/yc2uewfk
MOSSELMAN BMW N54 UPGRADE TURBOCHARGER SET, MSL50-65 - tinyurl.com/yk574t6w
DKM Twin Disc Clutch. - tinyurl.com/3pr4fkaa
Mosselman Oil Thermostat - tinyurl.com/yk574t6w
Precision Raceworks Coil Pack. -tinyurl.com/mu44uy4p
Mosselman Oil Cooler - tinyurl.com/33trn6fk
CSF Front Mount Intercooler - tinyurl.com/4s34pxrt
CSF Performance Radiator - tinyurl.com/4s34pxrt
Turner Motorsports Coolant Relocation Kit. -tinyurl.com/vmxtbxwn
VRSF Relocated High Flow Inlet Kit - tinyurl.com/3dbxhukw
BMS Cowl Filters - bit.ly/3rj8mpG
Tial Q 50mm BOV - tinyurl.com/r8f9ac
Bremmen Aluminum Valve Cover - shorturl.at/DJPV5
Nexsys N54 B58 Coil Adapter Kit (Does not include coil packs). -shorturl.at/dpAJZ
B58 Ignition Coil Packs (x6) - shorturl.at/ruGNY
MLT Oil Filler Cap - shorturl.at/fuD19
Doc Race N54 Top Mount Precision Turbo Kit (Precision 6266 Turbo). - tinyurl.com/jc8d2dta
Suspension Parrts:
Ohlins Road & Track Coilovers (E9X M / 1M) - tinyurl.com/3sj93x5c
51618051973KT - OEM 1M Strut Bar Kit. - tinyurl.com/yck2p9xp
Braking Parts:
F8X Front Right Caliper - tinyurl.com/5c6htuc2
F8X Front Left Caliper. - tinyurl.com/2vm7zmr7
F8X Rear Right Caliper - tinyurl.com/mrx4485n
F8X Rear Left Caliper. - tinyurl.com/5n8yuknv
F8x Front Left Brake Dust Shield - tinyurl.com/yc256php
F8x Front Right Brake Dust Shield - tinyurl.com/2nta8rf7
F8x Rotors, Pads, Wear Sensors Kit. -tinyurl.com/4eaj23u6
F8x Front Right Steering Carrier - tinyurl.com/m7kpm9x3
F8x Front Left Steering Carrier - tinyurl.com/durssnpc
F8x Abs Sensors - tinyurl.com/4h2by3df
Turner Stainless Steel Brake Lines - tinyurl.com/2r33dw5s

Авто/Мото

Опубликовано:

 

3 ноя 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 75   
@ThicWhips
@ThicWhips 7 месяцев назад
LINK TO 1M CONVERSION PARTS: tinyurl.com/3uphrbr3 BMW MODIFICATIONS FROM ALL OF MY BUILDS: www.thicwhips.com All of my Wheel & Tire Setups: tinyurl.com/yyftysns
@mosesfrancisco
@mosesfrancisco Год назад
This 1M Conversion is Really going to make Jonathan take off for his Channel. Great Content and Footage that is teaching us all about BMW's!! Awesome work man you came a long way from the Beginning!! Respect bro all the way from here in Miami.
@ThicWhips
@ThicWhips Год назад
Thank you man!
@alexhaugen7530
@alexhaugen7530 Год назад
You should paint the headliner black, especially if your planning on not tinting the windows. It makes the interior look 10x better
@ThicWhips
@ThicWhips Год назад
I’m going to buy a black headliner, along with pillars etc!
@829productions
@829productions Год назад
You should do the star headliner since you already there as well this is gonna be one unique ass project I like
@atl_e
@atl_e Год назад
@@829productions star headliner? This isn’t a RR
@Boomslang_Studio
@Boomslang_Studio Год назад
Really impressive stuff man, it looks great! Can't wait to see how she turns out!
@jimmygarcia7146
@jimmygarcia7146 Год назад
Can wait to see it completed been watching the channel for a minute and I can’t stop watching bro keep it up.
@ThicWhips
@ThicWhips Год назад
Thanks Jimmy!
@Unamatrix01
@Unamatrix01 Год назад
Amazing progress so far, Johnathan. I am quite looking forward to when the rear fender arches are being cut and the 1M wide arches are installed.
@krismarch3718
@krismarch3718 Год назад
Thank you for the list! I’m gonna start my conversion this winter. I’ve had my 135i for like 7 years now and it’s about time.
@M3_Foss
@M3_Foss Год назад
Putting in some work BOI!!! Loving this refresh! It's a nice change of pace. Great job man!
@ThicWhips
@ThicWhips Год назад
Yessir! Thank you
@loekfelten548
@loekfelten548 Год назад
Very interesting project. I like the way you film every step along the way. Would love to do much of this to my E81 💪🏼💪🏼👍👍
@musselicious
@musselicious Год назад
Kudos for doing this journey and let us follow in the build 🙂👍🏻
@mikelvn5410
@mikelvn5410 Год назад
I'm impressed with the new build I have been watching for years I typically only see you do cosmetic nods but you can do your own work on alot of stuff. I have a small channel and I have been trying to learn but my time is limited. I do as much myself as possible I love doing it
@ThicWhips
@ThicWhips Год назад
Thanks for watching Mike!
@TommyLGarage
@TommyLGarage Год назад
Not gonna lie - this is great! And kudos for going OEM on so many things
@ThicWhips
@ThicWhips Год назад
Glad you enjoy it brotha. Btw I’m in NYC right now!
@aaronbrown4366
@aaronbrown4366 Год назад
When the 1M’s first came out, there was the little old lady that bought one, she had to be one of the first ones with it. It was that burnt orange color (sorry, don’t know the factory color name) and I thought that the was coolest thing. I would see her ripping around town all the time in it. Haven’t seen her in a while, but hope she’s ok. This build series has been great and I agree with the headlights. Some factory stuff just looks better. Maybe you’ll think about painting the hood next 🫣 lol.. but yea, man.. you’re knocking this out. Many blessings on a smooth build.
@ThicWhips
@ThicWhips Год назад
Yeah after having the carbon hood for a week I’m leaning towards painting it. I think the oem approach will just look much better
@Mr328turbo
@Mr328turbo Год назад
Great stuff Jonathan, love watching your videos and the progress. As far as i know the 1M have an additional small radiator same as the 335is that goes on the driver side and not a dual oil coolers.
@bmwlovergaming
@bmwlovergaming Год назад
Good choice 👌 on the wheels. I love the aftermarket headlights also
@byronkaiju
@byronkaiju Год назад
I can’t wait to see this complete 🔥
@kaymdoc
@kaymdoc Год назад
May have missed this - but curious - are you planning to use Jay Meadows flares for the rear or OEM quarters ? I’m in the middle of sorting through my 1M clone build. Also, what headlight washer reservoir are you using if you're not using the headlight washers? Is the second pump plugged or did you get one without the headlight washer pump?
@stevenfurayi8607
@stevenfurayi8607 Год назад
Good job man. This car is coming along so well. Can't wait to see the end product. Great project but pricey 😁. All the best
@zoltanvaradi2279
@zoltanvaradi2279 Год назад
25:00 Which module is this? I'm done with my 1M Coupe conversion, but I don't remember the module there. 😮
@maxa7665
@maxa7665 Год назад
Interesting build! My dream is to build something like an "3M" from a 335is. Similar car as the 1M but in a 3 series body which means basically M steering, handling etc. from M3 but still keeping the n54 engine just like in the 1M. I also prefer the more simpler look of a 335is compared to the M3 so I wouldnt make any exterior mods to make it look like an M3 but to handle and feel similar while having the n54.
@michelfeghaly2608
@michelfeghaly2608 Год назад
Although im not into BMW’s, I am really enjoying this series!
@ThicWhips
@ThicWhips Год назад
Thank you! Glad you enjoy it!
@mk_2dvus
@mk_2dvus 4 месяца назад
are you selling those headlights that you were switching out??
@xZiMinDaveyy
@xZiMinDaveyy Год назад
Wow awesome!!!
@averyc7492
@averyc7492 Год назад
Have you thought about doing the ford diff?
@tgshark1
@tgshark1 Год назад
Badass, I plan to widebody an older modeled 3 series in the next few yrs
@seollenda
@seollenda Год назад
So juiced to see the final product 😮
@eugene1822
@eugene1822 Год назад
Sooooo no roll cage for the m4?
@leonarnpc
@leonarnpc Год назад
I wish I could do this to my 128i. But I have no garage or any tools to do any of this work.
@ElliottBrooks
@ElliottBrooks Год назад
Awesome vid - I've only seen one other cover this, and this is much more in-depth. But you need to wear gloves bro! Stressing me out hahaha
@ThicWhips
@ThicWhips Год назад
Haha mannn I used to wear gloves, but I either use disposables and they rip or I lose my good gloves and can never find them! Thanks for watching dude!
@ElliottBrooks
@ElliottBrooks Год назад
@@ThicWhips hahaha yeah I bought a 100 pack of disposable gloves and have probably gone through half filming my latest 135i radiator vid
@briaforpres6669
@briaforpres6669 Год назад
513m🔥🔥
@atl_e
@atl_e Год назад
Isn’t the 1M track wider than 135i due to suspension differences? Just wondering if wheel fitment will change once you convert the suspension
@kaymdoc
@kaymdoc Год назад
I know the 1M uses the M3 control arms F&R but I'm not sure what that does to the track.
@saucyj8722
@saucyj8722 Год назад
A nice upgrade is to get front M3 control arms. They add a bit of negative camber and increase handling alot!
@ThicWhips
@ThicWhips Год назад
I actually have those already, however I do want to upgrade the steering rack as well.
@saucyj8722
@saucyj8722 Год назад
@@ThicWhips Ah awesome man! I'm planning to do the upgrade on my 335
@ThicWhips
@ThicWhips Год назад
Well, there will be a few things I do that aren’t oem, but mostly because of costs. Some of the oem parts for the 1m are just insanely expensive and hard to justify. But the advantage to NOT having a true 1m allows me to have a bit more fun with it.
@AutoHeadz
@AutoHeadz Год назад
Let’s go!
@ThicWhips
@ThicWhips Год назад
Yessir!
@n54single
@n54single Год назад
could i buy these headlights off you? im in canada. also have a 135i 1m conversion but rod bearing spun 2nd i bought it. lol its a 6spd. i want to pm you!
@ThicWhips
@ThicWhips Год назад
I actually have a buyer already man sorry
@seollenda
@seollenda Год назад
Btw, will you do carbon roof?
@ThicWhips
@ThicWhips Год назад
I want to!
@POMAH_MOHISH
@POMAH_MOHISH Год назад
I can't tell if you sound like Dustin Williams or he sounds like You!
@ThicWhips
@ThicWhips Год назад
Lol
@anrs3153
@anrs3153 10 месяцев назад
What supports the bottom half of the rear bumper ? …. I don’t have a diffuser / crash bar yet but the bottom half seems like it moves a lot for me ? Is this because there’s also no arch liners in or something ?
@ThicWhips
@ThicWhips 10 месяцев назад
Same as base model rear assembly, there are brackets on left and right that clip into bottom of quarter panels and allow bumper to secure. On bottom, there are wheel arches (plastic) as well as lower splash guards and diffuser. That’s how it is from factory. No problems
@anrs3153
@anrs3153 10 месяцев назад
@@ThicWhips I’ll have another look, thank you for the reply, the only thing standard had over the 1m is like a undertray that bolted from the middle of the diffuser to the boot floor which secured the mid section, where as the 1m bumper will have the exhaust there, I just don’t know what will secure the mid section that’s moving unless the diffuser (when I get it) stiffens it a little bit more
@ThicWhips
@ThicWhips 10 месяцев назад
Don’t need it, trust me
@anrs3153
@anrs3153 10 месяцев назад
@@ThicWhips maybe me over thinking, just a lot of flex in the diffuser area haha.
@ThicWhips
@ThicWhips 10 месяцев назад
There is hardly any flex. Once you assemble one of these you’ll see.
@adelelgarhy7807
@adelelgarhy7807 Год назад
What about the 1M mirrors and the black head liner ?
@robles
@robles Год назад
Hope he goes oem 1m mirrors and not just crappy mirror caps
@ThicWhips
@ThicWhips Год назад
I’d love to do the mirrors but they are insanely expensive, so for now I’ll just leave them or run some caps.
@ThicWhips
@ThicWhips Год назад
Headliner is coming!
@adelelgarhy7807
@adelelgarhy7807 Год назад
Keep up good work bro 👌🏽👌🏽
@ThicWhips
@ThicWhips Год назад
Thanks man!
@One_don2612
@One_don2612 Год назад
I agree with the headlights oem better
@ThicWhips
@ThicWhips Год назад
Yup yup
@kylepalmer2360
@kylepalmer2360 Год назад
Yo bro, where can I find motors? 😂
@ThicWhips
@ThicWhips Год назад
I bought mine from straight six auto parts on Instagram
@SeksiKabus
@SeksiKabus Год назад
the 1m have 1 oil cooler and 1 water cooler.....
@ThicWhips
@ThicWhips Год назад
It’s an auxiliary coolant radiator
Далее
OEM BMW 135i to 1M CONVERSION. (Front Assembly)
24:36
НУБ ИЩЕТ ЖЕНУ В GTA SAMP
22:34
Просмотров 242 тыс.
E82 135i to E9X M3 COWL CONVERSION (FREE N54 DIY!)
11:29
The 1M Clone Is Officially COMPLETE!
21:29
Просмотров 15 тыс.
Revealing My PROUDEST BMW Build to Date! (1m Clone)
17:46
BMW 1M S65 V8 SWAP | This is how!
19:48
Просмотров 16 тыс.
3 ESSENTIAL MAINTENANCE MODS FOR MY CHEAP BMW 135i
18:34
Мгновенная карма 😱
0:10
Просмотров 3,4 млн
Мгновенная карма 😱
0:10
Просмотров 3,4 млн
Кто-то ездил в жару на УАЗе?😂
0:55