OEM TRX Rear Marker Lights Install 2020 Ram 1500 Rebel 5th Gen

VenomRebel 2020

Подписаться 1,6 тыс.

Просмотров 8 тыс.

50% 1

Add TRX Marker Lights🦖 to your Ram for around $50. You'll need to purchase some mounting hardware and lengthen the ground wire. Here's the hardware I used.
2 X 10-24 X 2" Machine Screws (Round Head)
5/16 X 1/2 #10 Aluminum Screw Spacer
Washers
Nylock Nuts
Here's the link I used to purchase the lights: www.jeepchryslerdodgeramparts...
The rest of the build is documented on RU-vid
Use the code Venomrebel2020 for 10% off LasFit Products
LASFIT: lddy.no/1cpgf
2020 Ram 1500 Rebel -
Suspension Upgrades:
Bilstein 6112s 8th Position
• Bilstein B8 6112 2020 ...
Total Chaos Fabrication Stainless Uniball Upper Control Arms
• Total Chaos Fabricatio...
Wheels and Tires:
Mickey Thompson 35" MTZ P3
VenomRex 603 Rims
• 2020 Ram 1500 Rebel Le...
Accessory Lighting:
TRX Style "Ramtor" Grill Lights
• 2020 Ram Rebel 1500 TR...
OEM Style Bedlights
• Ram 1500 Rebel OEM Sty...
TRX Rear Lightbar
• OEM TRX Rear Marker Li...
Mopar Accessories:
Mopar Bedrails
• 2020 Ram Rebel Bed Mop...
Mopar Genuine Air Deflector
• 2020 RAM REBEL - ALL M...
Flagpole Mount:
• Flagpole Mount Ram Uti...
Truck Jewelry:
Kempter Kustoms Venom Hitch Plate
• Naming Your Truck ~ Hi...
Warranty Work:
Driver's Mat
Aftermarket Mats Reviewed
• 2020 Ram 1500 Rebel ~ ...
Rear Window Replacement (Leak)
• 2020 Ram Rebel ~ Back ...
Rear Brake Moan Kit
• 2020 Ram 1500 Rebel Ba...
Side Steps:
Westin HDX Xtreme Nerf Bars
• 2020 Ram Rebel Crew Ca...
Engine:
K&N CAI
Valvoline Full Synthetic/Lucas Synthetic Oil Stabilizer/K&N Oil Filter
• 2020 Ram 1500 Rebel Oi...
Free Hacks
Turn OFF Seat Belt Chime
• Free Hack! Turn Off Se...

Авто/Мото

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@inktheghost 2 года назад

Brother you have opened up a whole new world for me. I’ve been upgrading my 2021 Rebel for the last week and lights are next on list along with the blackout of front skid plate. Every idea in my head I have been wondering how to do them until I came across your page. Keep bringing us new things man

@venomrebel2020 2 года назад

Thanks for the kind words. I appreciate it.

@jo3k1ck455 Год назад

I like the it! My Ram Mega Cab has had it for some years now. The difference is my three light bar has a red lense and the front makers are the big orange ones on the roof. Basically the factory dually marker lights on a non dually lol. I like the look, you did a great job!

@thorrepairs6557 3 года назад

Those lights look real nice!! The install looks easy and clean as well 👍🏻👍🏻

@venomrebel2020 3 года назад

Thanks dude!

@StVick 2 года назад

Been looking for a video like this for awhile. Doing OEM tailgate light bar for my SRW 3500.

@venomrebel2020 2 года назад

Hey man! Thanks for watching!

@wesleywillis420 Год назад

I’m getting ready to do this mod now…I have all the parts…video is awesome and very informative! I have one question though, how low do you drill on the bumper for the 2 holes for the screws? Any measurements on that? You mentioned you had to re-drill cause of tailgate hitting the light when opening… Thanks in advance!

@venomrebel2020 Год назад

I will take a look. The truth is it rubs a bit, probably no matter what. Not enough to prevent the tailgate from fully opening, but enough to notice.

@SpookyMontero Год назад

Thanks I might get this for my jeep haha

@venomrebel2020 Год назад

Fun ✌️

@newlovesportfishing4870 3 года назад

Hey Venom!.. if you did this again would you use a shorter screw?

@venomrebel2020 3 года назад

Probably. I might still have to hack the excess off the screw behind the electrical connections. But probably 🤙

@newlovesportfishing4870 3 года назад

@@venomrebel2020 Getting ready to install this soon. What length screw would you go with? Not looking to hack the excess

@venomrebel2020 3 года назад

@@newlovesportfishing4870 I honestly have no idea. For it to work the screw needs to be shaved right to the locknut.

@newlovesportfishing4870 3 года назад

Hey Venom. Where did you drill the left side hole? Above the wire harness or below it?.. driver side…

@venomrebel2020 3 года назад

I used the existing hole on the left. Good luck!

@newlovesportfishing4870 3 года назад

@@venomrebel2020 Finished it up yesterday… Nothing is easy. Lol Came out nice though. Thanks!

@venomrebel2020 3 года назад

@@newlovesportfishing4870 Great dude!! 👍🤙

@jonathanbefus9433 Год назад

Do these light up when hitting the brakes?

@venomrebel2020 Год назад

I wired them to come on when the headlights come on

@whenspidersattack2449 Год назад

Where did you move the wiring harness for the tailgate camera that is mounted where the light needs to be? Thx

@venomrebel2020 Год назад

I did not move it. I used spacers.

@whenspidersattack2449 Год назад

@@venomrebel2020 Thanks I just watched your video again more closely. Wasn't even thinking you could put the light on top of the wires. I've discovered you can buy the TRX tailgate harness that would move those wires over so they aren't an issue. It's $70 though.

@venomrebel2020 Год назад

@@whenspidersattack2449 I did exactly that. Be mindful of how it might interfere with the tailgate drop. Positioning is important.

@whenspidersattack2449 Год назад

@@venomrebel2020 Thanks again.

@RekonRC 7 месяцев назад

Do any of you know the part number for that harness?? I rather spend 70 bucks more and leave it like it should be!

@ourlifereviews 3 года назад

Are they red or orange?

@venomrebel2020 3 года назад

Red

@newlovesportfishing4870 3 года назад

Any drilling?..

@venomrebel2020 3 года назад

Just in the plastic flap between the tailgate and the license plate

@newlovesportfishing4870 3 года назад

@@venomrebel2020 Did you take any photos of the install process?.. Great Vid but it’s kinda hard to figure out where in the truck you were in some of it...

@venomrebel2020 3 года назад

@@newlovesportfishing4870all the action is happening under the rear of the truck. Drop your spare... makes a nice pillow 👍

@newlovesportfishing4870 3 года назад

@@venomrebel2020 behind the rear bumper? What size spacers and bolts did you use?..

@venomrebel2020 3 года назад

@@newlovesportfishing4870 should be in the description. If you’re on your phone tap the title.