Тёмный

Oerlikon Mk2 1941 

vbbsmyt
Подписаться 100 тыс.
Просмотров 210 тыс.
50% 1

The 20mm Oerlikon is a Swiss designed auto cannon used for high angle close range anti-aircraft fire, with an effective rang of 1,000 to 1,200 yards (915 - 1100m). The breech is not locked at the time of discharge and the round is fired a fraction of an inch before it is fully home in the chamber, the neck of the case swelling to form a gas seal. Muzzle velocity 2,725 ft/sec (830m/s) with a rate of fire 465 to 480 rounds per minute. The 20mm rounds are loaded into magazines holding 60 rounds. The last 2 rounds loaded are usually practice rounds so that if there is insufficient time to remove the muzzle cap the non-explosive rounds can blast through the cap. All cartridges are lightly coated with mineral grease when loading to assist the spent cartridge extraction.
The Mark II gun was made in Britain and in the USA principally for naval use. This animation shows the British Mark II. Models made in the USA are marked Mark II U.S.N or Mark IV U.S.N. There is no difference between these Marks and all three are interchangeable.
The animation was made using Cinema 4D and the music is ‘Song of Mirrors’ by Unicorn Heads. Source material: BR 274/41, OP911 and OP909 and author’s photographs.
If you enjoyed this animation please check out the Vbbsmyt channel on RU-vid for other military-related animations, and consider sponsoring me through www.patreon.com/vbbsmyt.

Наука

Опубликовано:

 

3 янв 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 175   
@adamdubin1276
@adamdubin1276 3 года назад
Fun fact: the solid practice shot is the first cartridge in the magazine in case the muzzle cover is either stuck on the gun through ice, negligence or some other reason. The practice shot removes the obstruction so that the shell that comes after it doesn't detonate in the barrel.
@mikelagaffe
@mikelagaffe 3 года назад
absolutely correct, but those are the first 2 shots, just to be positively sure its not obstructed. you really dont want an HE round blowing up right in your face...
@MrMarinus18
@MrMarinus18 5 месяцев назад
That reminds me of the reason 20mm was so common. The reason is actually a legal one. There was (and still is) a ban on exploding bullets and the cut-off point between a "bullet" and a "shell" is 20mm. So 20mm is the smallest caliber you're allowed to add a bursting charge.
@sebbes333
@sebbes333 3 года назад
This designer: "When in doubt, use more springs!" ..."And if that doesn't work?" ..."Use *MORE* springs!!"
@smorrow
@smorrow 2 года назад
Can you imagine a world without springs?
@sebbes333
@sebbes333 2 года назад
@@smorrow First, are we taking about exactly springs (coiled metal wire), or ALL "springy things" in general? Eg. Would a leaf spring exist? Would rubber exist? Can compressed air in a pneumatic piston be considered as such a spring?
@smorrow
@smorrow 2 года назад
@@sebbes333 It's just a reference. 'a world without springs' on RU-vid.
@sebbes333
@sebbes333 2 года назад
@@smorrow It is still an interesting concept, we would have almost NOTHING today, especially if "everything springy" would be removed, we would be back to like early gathering technologies.
@kornaros96
@kornaros96 Год назад
KSP school of thought
@cmendla
@cmendla 3 года назад
My Dad enlisted in the Coast Guard during WWII. He was a Radio Operator and 20mm gunner. He would have loved this. He related a story that during gunnery practice, they had a misfire. IIRC, the drill was for the gunner's mate to remove the barrel and dunk it in a bucket of water kept there for that type of emergency. The idea was to prevent the round from cooking off in the barrel. The gunner's mate removed the barrel but missed the bucket twice. The patrol frigates were small ships and not the most stable vessel in rough weather. Dad's gun was just outside the bridge. The mate heaved the barrel over the side and into the ocean. I'm not sure what the repercussions were but the guys, including my dad, were glad to see it gone.
@logoseven3365
@logoseven3365 3 года назад
Never would have guessed how complicated this one was. Great job!
@hansgruber3397
@hansgruber3397 3 года назад
In Relation to comparable weapons it was relativly simple. That was the main reason for it's sucsess (sorry for my english)
@logoseven3365
@logoseven3365 3 года назад
@@hansgruber3397 Your English is fine! I never realized how many interlocks and safeties there were. Really neat weapon.
@popinmo
@popinmo 3 года назад
my favorite part is the fact its blowback i love unqiue ways people deal with the bolt recoil
@thermionicemission6355
@thermionicemission6355 3 года назад
@@popinmo Yep, and now Sig has come out with their MG-338, which copies the General Dynamics concept, which in turn was inspired by Advanced Primer Ignition. In these modern machine gun iterations, the whole assembly is locked back a bit and when the trigger is pulled, the assembly slides forward and right before it hits the end of travel, the gun fires, the recoil mitigation effect is identical to this gun then, just that it is the whole assembly rather than mostly the bolt.
@d.cypher2920
@d.cypher2920 3 года назад
This is AWESOME! *Please* never think we don't appreciate your efforts. Love your stuff! ☀️😎☀️🇺🇸
@MatzeB111
@MatzeB111 3 года назад
Thank you very much for the elaboration of this famous weapon, I am thrilled every time something new comes along.
@Aminuts2009
@Aminuts2009 2 года назад
This was my dads station on USS Amsterdam CL - 101. He said you couldn't hit the side of a barn with one but they just sprayed it in the general direction and hoped. Good to see the operations and how they are put together.
@Isaac-ho8gh
@Isaac-ho8gh Год назад
Not surprised, they're basically big open-bolt submachine guns and their 20mm round is pretty shit since it had to be underpowered for the Orelikon's blowback bolt lol
@CosmasBauer
@CosmasBauer 3 года назад
Wonderful animation. Very very interesting! Thank you!
@capthawkeye8010
@capthawkeye8010 Год назад
This cannon doesn't seem like a big deal now-but in the 1930s absolutely everyone was struggling to come up with a decent 20mm autocannon that was both light weight and reliable. The Germans originally had the Becker 20mm-a gun which met the design goal of being very light but compromised on everything by using a cartridge with a low muzzle velocity. That said, the original Oerlikon design was based on that gun now with a more powerful 110mm cartridge and the Oerlikon version was so successful that the Germans retroactively copied the Swiss' version back as the MG/FF. The other competitor was the 25mm gun Hotchkiss came up with-but that gun was very heavy and fired from a static mount only. The Americans came up with an equivalent gun-the 1.1in/75 which was actually 28mm although it lived in the same realm as the Oerlikon-but it was notoriously troublesome and complicated. Twenty-eight millimeters was also something of an awkward caliber-the idea was to make a good one-stop-shop gun that could fight all kinds of aircraft but in practice you ended up with a gun that was too light to shoot down many bombers and too heavy to be used in most mounts. The Oerlikon is still in production to this day-along with the M2 Browning that should give one an idea of just how successful it's been in its category.
@adh615
@adh615 3 года назад
Thank you very much for this, I've been trying to understand the mechanism of the oerlikon for ages now, this is a giant relief for me
@dogsbd
@dogsbd 3 года назад
Thanks for helping me better understand the weapon my father used in the US Navy during WWII.
@51WCDodge
@51WCDodge 3 года назад
Thank you again for a clear animation. Makes understanding so much easier
@ernst_junger
@ernst_junger 3 года назад
Absolutely wonderful! Tons more detail than you could ever see even with a real model. I hope you could do a video on one of the German torpedoes from the second world war
@tonyneo6100
@tonyneo6100 3 года назад
BRILLIANT . I have studied this gun , but this gives it a completely new light , thank you .
@arcron3
@arcron3 3 года назад
Fantastic! Love to see the mechanics and design!
@chibani-
@chibani- 3 года назад
Such genius features... Great job at modelizing that.
@Stukageschwader
@Stukageschwader 3 года назад
Awesome!! very fine production!! Congrats!!!
@Wurstbrot5555
@Wurstbrot5555 3 года назад
Nice to see a lot of new Videos. Some written explanations about what is happening and why would be great, I do not understand every detail. Great work! PS. It's gotten better with the explanations, thanks.
@user-ys2eq7mg1k
@user-ys2eq7mg1k 3 года назад
Fascinating! Always thought it had somewhat simpler design.
@2serveand2protect
@2serveand2protect 3 года назад
Very well done - big thanks!
@bretwalton6535
@bretwalton6535 3 года назад
I found this video fascinating as my father manned one of these during WWII. He was in the Naval Armed Guard, a part of the U.S. Navy. He served on Liberty ships going across the North Atlantic. When I was a kid about 12yrs old we came across one on a museum ship in NY City. He was overjoyed and told me all he could remember. On the inside of the gun shield stenciled in black was "Lead Dammit Lead". In reference to the gun sight. It has 3 rings. Each ring represents the target's estimated air speed in increments of 100. The first round in the magazine was a blank. That was there to blow out any obstruction such as a forgotten cleaning rag. Every fifth round was a tracer and the rest a mixture of AP and HE rounds. At the base of the pedestal the gun was mounted on was a 3' diameter ring that the operator stood on. About 6-8" above the ground. He was strapped on so as not to fall off. It allowed him to pivot quickly to address targets. Also you didn't wear a shirt while manning the gun or it would need replaced. Spent shells that hit the operator would burn holes in it. My father had many burn scars on his chest from his tour of duty.
@seanmccann8368
@seanmccann8368 Год назад
Thanks for sharing this information, always good to hear from the people who used the weapon or equipment (or their close family).
@patnolen8072
@patnolen8072 Год назад
Fascinating - when I studied the 20mm Oerlikon, I didn't know it could fire blanks. Also interesting to know the gunners were strapped to the gun with a harness.
@yelectric1893
@yelectric1893 3 года назад
Thank you for teaching us. It’s so complicated and intricate, beautiful
@somerandofilipino6957
@somerandofilipino6957 3 года назад
What do you mean? Its operating systems seems incredibly simple if you ask me.
@yelectric1893
@yelectric1893 3 года назад
@@somerandofilipino6957 the magazine release and floating trigger is kind of ridiculous. This is no uru smg even though it’s like a giant smg
@somerandofilipino6957
@somerandofilipino6957 3 года назад
@@yelectric1893 Yeah you're right. And its Uru, actually
@yelectric1893
@yelectric1893 3 года назад
@@somerandofilipino6957 oops. Have you seen the bofors animation? It is not as straightforward as this one.
@Listener970
@Listener970 3 года назад
Absolutely amazing, both the mechanism and your animation. Keep on making. Turned on all notification from your channel.
@lorincbody4695
@lorincbody4695 2 года назад
This inertia+big spring delayed blowback system is wild. I would have thought that any sane weapon above pistol cartridges needs some kind of locked breech.
@smorrow
@smorrow 2 года назад
not 'sane' though
@Conserpov
@Conserpov Месяц назад
The downside of blowback is very low rate of fire. Advanced ignition makes it lighter but less reliable and ammo-fussy. So locked breech is the only way to make a light, reliable, non-fussy and fast gun
@holton345
@holton345 3 года назад
Excellent rendering. Thanks for posting.
@louie55ish
@louie55ish 3 года назад
I used to be a loader on one of these back in the 90s before they were replaced by the Gambo 20mm. The reason the RN still used them them was the ammount of ammo still available for it. I remember greasing the individual rounds before charging the mag, a real pain. At one point we had to go through fifteen mags to use up the last rounds when the gun stopped working. There was nothing wrong, no jam, no misfire, the gun simply stopped firing; strange!
@SVAyouTube
@SVAyouTube 3 года назад
Very perfect job 👍 Thanks a lot
@wjskyout
@wjskyout 3 года назад
Brilliant! Can't understand why you have a downthumb on this. It would be awesome to see an animation of the Hughes M242 25mm chain gun. That is a interesting mechanism. Thanks for posting this
@MastakAK
@MastakAK 3 года назад
Thanks for your hard work! I always wondered what was inside the mechanical monsters!
@kratosr.t.3377
@kratosr.t.3377 3 года назад
PERFECTION!
@sabeda1647
@sabeda1647 3 года назад
bloody brilliant as usual!
@user-dg4tl4bw6v
@user-dg4tl4bw6v 3 года назад
Looks like great recoil control mechanism.
@Zorglub1966
@Zorglub1966 3 года назад
Great job! Thank you very much, and best wishes.
@kimchipig
@kimchipig 3 года назад
Robert, thank you so much! You are a master!
@user-zx5pg2dx6x
@user-zx5pg2dx6x 3 года назад
You are a real engineer and technocrat
@Ettoredipugnar
@Ettoredipugnar 3 года назад
Thanks for posting . Very good video !
@sdgardner1954
@sdgardner1954 3 года назад
Great Job animating this!
@Salmon_Rush_Die
@Salmon_Rush_Die 3 года назад
your animations are glorious. subbed.
@desert_jin6281
@desert_jin6281 3 года назад
Nice, I'll need to watch it again to understand it all though :)
@uomodonore245
@uomodonore245 2 года назад
Thumbs up for Swiss engineering.
@ddraig1957
@ddraig1957 3 года назад
Looks surprisingly simple in operation.
@JohnCBobcat
@JohnCBobcat 3 года назад
This is super cool. I really, really enjoy this stuff. And I'll prattle on and on (with rewinding as necessary) to anyone who will listen, as I put 2+2 together while watching.
@cfeco1716
@cfeco1716 Год назад
BOY...I SURE could have used this when I had one of these, it was the Japanese HO-5 auto-cannon out of a WW2 Zero fighter...Also the one shown in Red Jacket Firearms TV show. I had a hell of a time trying to figure out the trigger-sear mechanism....Now it make sense! Probably just as well, like they said in the TV show!
@demos113
@demos113 3 года назад
Always with the good stuff. :-)
@yvc9
@yvc9 2 месяца назад
These are mesmerizing
@MIKE_WOLF_GR
@MIKE_WOLF_GR 3 года назад
Thank you so much my friend for your amazing video. My father served on navy he was a gunner on o erlikon boforce and 5inch guns your video is exactly with the description of my father's. Thank you again keep up the excellent work. IF you can please create a video with twin naval - AA guns 5inch like BB USSMissouri's secondary armament
@oldschoolfoil2365
@oldschoolfoil2365 3 года назад
Great animation work have become a subscriber
@quertize
@quertize 3 года назад
That return spring looks nasty.
@a.t6066
@a.t6066 3 года назад
Well it is a straight blowback 20mm. I would hope the springs would be beefy
@nanab256
@nanab256 3 года назад
Good job
@SuperMarkbrewer
@SuperMarkbrewer 3 года назад
Thank you absolutely fascinating 😀 and I didn't think it would be my mistake 😅
@daveharringbone8512
@daveharringbone8512 Год назад
Beautiful
@eddieescobar4722
@eddieescobar4722 11 месяцев назад
Now this is what I'm talking bout cannons..💣💯💪🔥
@mootpointjones8488
@mootpointjones8488 3 года назад
Superb!
@Melanth89
@Melanth89 2 года назад
TIL these things are an open bolt, straight blowback... autocannon. That is both fascinating and horrifying all at once.
@user-bf5tm2zj8y
@user-bf5tm2zj8y 3 года назад
Wow! Thank you very much. It's so interesting and educational! Can you please show the German mg108 cannon in one of the following videos?
@johnbeauvais3159
@johnbeauvais3159 3 года назад
So a quick story, my grandfather was a Gunners Mate on an attack cargo ship in the pacific in charge of these guns and he said at the end of the war of course they disassembled and cleaned these guns but when it came time to put the barrels back in they just twisted them hand tight since they weren’t planning on firing them anymore. Of course they have a flag officer visit and they want to do an inspection and weapons demonstration. They start firing and bang bang bang plop splash the barrels unthreaded and launched off the side of the ship he said they sent like 4 new gun barrels down to the bottom that way and of course got chewed out for it
@MetamorphicWonders
@MetamorphicWonders 3 года назад
Absolutely Brilliant. Thankyou so much. Must have taken hours!!!! can i throw another at you ..... WW2 Browning 50 cal M2 HB on an M63 tripod. !!
@junglehunteryautja5490
@junglehunteryautja5490 2 года назад
Awesome. Idea, german 20,37, 50mm flak and hotchkiss 25mm AA gun
@williammcdorman6426
@williammcdorman6426 3 года назад
Very nice, am surprised they didn't put a ratch handle on the charging mechanism.
@fepasarussa8642
@fepasarussa8642 3 года назад
Oerlikon then: normal 20mm AA Oerlikon today: haha 35mm go BRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
@Desmaad
@Desmaad 3 года назад
It amazes me that this cannon is simple blowback. Normally you'd expect a weapon of this calibre to have a locking or delay mechanism.
@bottomshot4546
@bottomshot4546 3 года назад
explore the history and you'll find 20mm design started with blowback operation and advanced primer ignition.
@zlodeyshe
@zlodeyshe 3 года назад
шикарно, особенно обрыв гильзы с раздутием
@ericbouchard7547
@ericbouchard7547 3 года назад
Is there enough material available to animate a 1.1"/75? I've always been curious about how the thing actually functioned. In regards to your already-completed works, top-notch stuff.
@leonardotavaresdardenne9955
@leonardotavaresdardenne9955 2 года назад
"I've always been curious about how the thing actually functioned" Well, it didn't :p
@maximus7932
@maximus7932 3 года назад
Nice animation man, can i request you to make m2 browning animation
@mscisawwodecki3220
@mscisawwodecki3220 3 года назад
There's been enough comments on the animations themselves, so I'm not going to repeat them, but I'd like to ask you one question. Have you, perhaps, considered uploading in two versions, one as they've been and the other, for the faint of ears, with some mild background theme, like workshop sounds or even some forest sounds, or perhaps some piece from the era (and operating sounds as well, obviously)? Edited: I wrote the above before watching the animation, and the music is very pleasant :)
@happypotato4694
@happypotato4694 3 года назад
Great vid man! What software do you use to design the weapons? I tries using blender for my technic projects but it doesn't help me "reproduce" complex or even basic mechanical systems. Shit gets overlaid and i can't make anything move like it should.
@vbbsmyt
@vbbsmyt 3 года назад
Details in the notes for the video - Cinema 4D
@happypotato4694
@happypotato4694 3 года назад
@@vbbsmyt thank you! Sry for not reading the entire description.
@CaptainGrief66
@CaptainGrief66 3 года назад
A seemingly simple and unassuming weapon system, but being swiss it's a fine-tuned mess of levers and springs, the fire control group especially is something mind boggling, must've taken a while to sort out, this think is a cuckoo clock for using Advanced Primer Ignition, which should supposedly allow for a simpler mechanism
@juanpablorossicabrales9176
@juanpablorossicabrales9176 3 года назад
Longest day Ouistreham...
@oficialdeguerra3888
@oficialdeguerra3888 3 года назад
I want one of these to protect myself from traffickers here in Brazil
@CostaCola
@CostaCola 3 года назад
YEEESSSS!!!! YEEESSSS!!!! THE OERLIKON!!
@koalathebeast995
@koalathebeast995 2 года назад
You got a ZU23-2 or KPV video?
@jokowidiawati2751
@jokowidiawati2751 3 года назад
*si vis pacem para bellum* Siapapun yg menghendaki damai, maka bersiap lah untuk mabar!
@tatotaytoman5934
@tatotaytoman5934 8 месяцев назад
literally big open bolt submachine gun
@jellymen2112
@jellymen2112 3 года назад
Wery good!
@moltke1870
@moltke1870 3 года назад
Very interesting channel mr vbbsmyt. Do you have plan implement planes machine guns and cannons in this channel?
@vbbsmyt
@vbbsmyt 3 года назад
There are 3 aircraft related animations in this playlist: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HwgebSpFApI.html
@MM22966
@MM22966 Год назад
Jesus, it ripping off a burst like that made me jump.
@joewipper7689
@joewipper7689 3 года назад
Cool
@allenpetrick6411
@allenpetrick6411 2 года назад
Bring Back the Oerlikon 20 mm cannon MK5 would benefit in the Gulf and you couldn't say an MRAP wouldn't look sexy in a CROWs mount in belt feed mode.
@danielgeorge5239
@danielgeorge5239 11 месяцев назад
wow nice work. Did you design these cad models yourself? How on earth did you find old accurate blueprints?
@vbbsmyt
@vbbsmyt 11 месяцев назад
This animation was generated from manual’s available on the web, including the Historic Naval Ships Association (HNSA) web site. This has 2 manuals on the Oerlikon OP 911 and OP 909, and I have used the drawings and instructions for the animation. So accuracy is a relative term.
@Polkem1
@Polkem1 26 дней назад
@@vbbsmytamazing, I want to find those manuals now 😊 I found the files and there’s so many! How long did it take you to model it?.?
@yutkijsamnong3202
@yutkijsamnong3202 3 года назад
Need to greased the shell before load into the magazine I remembered.
@vbbsmyt
@vbbsmyt 3 года назад
Correct, a light coating of mineral grease has to be applied to each cartridge when loading (but NOT oil)
@DreadX10
@DreadX10 3 года назад
@@vbbsmyt I don't remember it to be 'light', that layer of grease we put on there. ;-)
@rovman007
@rovman007 3 года назад
I am looking for the dimensions of this gun for the Victory model ship scale 1:50, beautiful animation
@gaston01000
@gaston01000 3 года назад
make one of the Scotti Model x
@odanewilson
@odanewilson Год назад
I need 100 boxes of those to buy ok
@AbdurrahmanZedSaeed
@AbdurrahmanZedSaeed 3 года назад
How bout the 76 oto melara?
@Ganglo-Saxon
@Ganglo-Saxon 3 года назад
I wonder, does it get harder to move as the shell bag fills up ?
@overboss9599
@overboss9599 3 года назад
Probably. Though certainly not as difficult to move as it would be if you had to wade through a pile of 20mm casings.
@Ganglo-Saxon
@Ganglo-Saxon 3 года назад
@@overboss9599 yeah that does make sense now that you mention it
@DreadX10
@DreadX10 3 года назад
No, the bag is directly below the centre of the gun (and close to both pivot-points) and it gaining weight doesn't matter much. Every couple of magazines of 60 rounds each, you need to change the barrel. This is also the time to put a empty ammunition-container underneath the bag and dump out the empty cartridges via an opening at the bottom. In other words, you empty the bag before its weight or (more likely) bulk becomes a problem.
@josephsurma8682
@josephsurma8682 3 года назад
How does the ejector hold the spent cartridge as it is pulled out?
@vbbsmyt
@vbbsmyt 3 года назад
It doesn't. Unlike many other guns, the breech is not locked to the barrel or receiver when the cartridge is fired, it is in fact still moving forward at the time the cartridge is fired. When the cartridge is ignited, the gas pressure forces the shell out the front of the barrel and at the same time forces the shell cartridge to the rear. The cartridge pushes against the breech assembly, which is much heavier that the shell, and resisted by the strong recoil springs.This initial kick drives the breech backwards on its recoil motion, but when the cartridge case hits the ejector (part of the magazine clam assembly) it is knocked down out of the gun.
@samleviathanzilla1718
@samleviathanzilla1718 3 года назад
hey do the uss iowa 16 /50 caliber mark 7 gun
@fwsteyn3312
@fwsteyn3312 3 года назад
I've been asking on basically all of your videos: could you please make the models available? I would love to 3d print a 1/4 scale model of this!
@vbbsmyt
@vbbsmyt 3 года назад
I have tried printing in 3D. It doesn't work, probably due to the way I build my models. The oerlikon gun has 1562 objects combined into subcomponents using boolean and combination functions. Converting them into STL files is difficult, and I have better use of my time, and having expended several hundred hours researching, building and rendering my models - why should I just give them away?
@fwsteyn3312
@fwsteyn3312 3 года назад
@@vbbsmyt Yeah nah fair enough. I would honest to god be willing to pay for them, as I am sure there are others as well. But if you say the modelling is not really done for exporting, then so be it. You have excellent models though. May I ask which resources you use as reference?
@raditya5663
@raditya5663 2 года назад
6:19 the case left behind?
@muchammadjamil8688
@muchammadjamil8688 3 года назад
what software do you use to animate that mechanism?
@vbbsmyt
@vbbsmyt 3 года назад
Please read the notes to the video.
@user-jw8fd4nt2h
@user-jw8fd4nt2h 3 года назад
О, годнота подъехала)
@odanewilson
@odanewilson Год назад
I need 4 boxes of those to buy ok
@vadimivanov7818
@vadimivanov7818 3 года назад
Super !!! 😁
@vfbrs2382
@vfbrs2382 5 месяцев назад
Wait, is that a big AF blowback smg ?
@stangarcia
@stangarcia 3 года назад
Top
@KeithHearnPlus
@KeithHearnPlus 2 года назад
So it's a simple blowback-operated mechanism, firing from an open bolt. Basically, a Sten on steroids.
@moistnugget4019
@moistnugget4019 3 года назад
So its a bunch of springs
@DreadX10
@DreadX10 3 года назад
and levers.....
@user-kz4rf8td3m
@user-kz4rf8td3m 3 года назад
I want to #request for creating a animation about Thompson M1921 Submachine gun
@mohammadrezaaghmand293
@mohammadrezaaghmand293 2 года назад
What is the name of this software?
@miguelhernandezm
@miguelhernandezm 3 года назад
Tienen otra animación en español de 20 milimetros
Далее
German G7e Torpedo 1941
20:02
Просмотров 438 тыс.
Naval Legends: Oerlikon | World of Warships
10:37
Просмотров 788 тыс.
French 75mm of 1897
15:18
Просмотров 691 тыс.
Schwarzlose machine gun 1912
5:55
Просмотров 455 тыс.
1898 3.2 bag gun cannon.
7:39
Просмотров 863 тыс.
Madsen
4:32
Просмотров 197 тыс.
US Cartridge, 20mm HEI. How it works
0:51
Просмотров 120 тыс.
12.5 inch Rifled Muzzle Loading Gun, 1885
11:23
Просмотров 737 тыс.
Artifact Spotlight: 20MM Oerlikon
2:26
Просмотров 41 тыс.
Shooting the Monstrously Powerful Quad M134 Minigun
2:16
🛑 STOP! SAMSUNG НЕ ПОКУПАТЬ!
1:00
Просмотров 139 тыс.