Office lounge analogue Mobula 6 tiny whoop freestyle session 

LoL

Hi check mine. Just upload my flight with tiny whoop today. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-l1WWWc2Z_bU.htmlsi=vOkT_SpkApI23UID

It’s called a trippy spin. Lots of tutorials on RU-vid

Good goggles (stability and resolution) and good receiver (quality)

Its 702 30.000kv PIDs are UAV tech Whoop preset, rest is default.

nothing in-particular. I suck at the whole betaflight thing, so pretty much default stuff more or less.

702 30.000kv

@@TrickyFPV420 Nice! No wonder it was so zippy. And that's with the stock 5A ESC or did you also upgrade the AIO to support the higher KV motors?

@@Repter75 stock AIO with Bluejay 96khz PWM

Only if you add an analogue mod to it.

The mobula i fly here is a 65mm, which would not fit even a naked o3, but as analogue whoop this one flies really great, especially with high kv motors. I have a FlyLens85 with a naked o3, it flies on 2s and it rips, however I would not freestyle it as it is way more fragile than any of the analogue or HDzero whoops. It is more of a smaller cinewhoop than i freestyle tiny whoop. If you want to rip around indoors, do flips and tricks and not worry about crashing, go with analogue or HDzero.

Thanks for the info, I'll do that

the walksnail 1s board would work nicely, too. but analog still is pretty great for the light weight and tiny quads

Added BT2.0, 3-blade props, Bluejay 96khz PWM, 702 30.000kv motors.

Can you please give me a link to the props, motors, and BT 2.0?

@@ederplays2788 you can easily google it yourself and buy from an fpv store that is convenient to where you are from.

In Betaflight OSD settings, where you can arrange everything as you want

​@@TrickyFPV420 What are these sliders in the upper left corner called?

I am terrible at PIDs and tunes and all that Betaflight stuff so I just used UAV tech whoop preset. I use 96 because it gives a tiny boost in flight time.

@@TrickyFPV420 Cheers!

Taip, per HDzero akinius

Not sure.. whatever is that you get with Mobula6 :) Recorded with HDzero Goggles and analogue module.

the camera is a runcam nano 3 and the happymodel x12 aio board has an "open vtx" built in

@@marc_frank nice

HDzero with TBS analogue module.

702 30.000kv, Gemfan 1208 3-blade

FPV for a few years now, I started flying whoops around this summer

@@TrickyFPV420 nice I just got my MOBULA6, any flying tips? It’s my first drone. Someone told me to do acro mode instead of angle

@@SmartContractHaxor No reason to fly any other mode than acro mode ;) Other than that- just keep flying, push your limits, try set something new every day and have fun! :)

there is a mixed mode for racing that combines angle and acro, but that's an advanced use case otherwise acro is the most natural flight mode

Not sure… whatever comes stock with mobula6?

it's a runcam nano 3