Office Supply ClamClip Hack for Taut Embroidery Hoopings with

Подписаться 74 тыс.

Просмотров 29 тыс.

50% 1

Do you struggle to get your fabric or stabilizer taught when hooping with a DIME Monster Snap Hoop? Here's a cool trick!
Get your Monster Snap Hoops here: www.shop.dzgns.com/?p=S1z1p1FgS
Visit my Amazon store for these clips! www.amazon.com/shop/powertool...
►Get Embrilliance Embroidery Software Here - bit.ly/3j8aKej
►Get YOUR Grace Longarm! - www.graceframe.com/en
Sewing / Embroidery Machine Cover Patterns on Etsy - tidd.ly/3O9PuUl
Red, White, & Bang Quilt Kit - www.creativenotionsquiltshop....
Warm Winter Wishes Fabric & Pattern - shrsl.com/3gvsf
Pineapples Betty's Luncheonette - shrsl.com/3h3yz
Chicken Wire Fabric - shrsl.com/3h40c
If you'd like to stitch along with me for the Kimberbell Cuties Table Toppers, here are the supplies. You can source your own fabrics and use up your scraps!
Kimberbell Cuties Pattern Book - bit.ly/3FayfNM
Kimberbell Cuties Embroidery CD (Uses a 6x8 embroidery field - this will not work in a 5x7 hoop) - bit.ly/3E3L2Qr
Pellon SF101 - amzn.to/3Mdu87e
DIME Stitch Ripper - www.shop.dzgns.com/collection...
Alphabet Fabric Markers & Bag - www.embroiderygarden.com/shop...
Brother Machine PQ1500SL - amzn.to/3C2lJPr
True Cut Rulers - amzn.to/340QkR1
All notions found in this video series can be found in my Amazon Store - www.amazon.com/shop/powertool...
Simply Applique Software - US Customers - www.allbrands.com/products/65...
Simply Applique Software - Non-US Customers - www.allbrands.com/products/97...
GET KEITH'S SEAM RIPPERS HERE - powertoolswiththreadstore.com
►Get Embrilliance Embroidery Software Here - bit.ly/3j8aKej
►My Amazon Store - www.amazon.com/shop/powertool...
►Our Store (Seam Rippers, USBs, Decals, & T-shirts) - powertoolswiththreadstore.com
►Send Me Mail Power Tools With Thread 14414 US Hwy 87W, Ste 3, Box 114 LaVernia, TX 78121
►Send Me eMail powertoolswiththread@outlook.com
►My blog - powertoolswiththread.com
►PTWT FB Page: - / powertoolswiththread
Some of the links above are affiliate links where I make a small commission at no cost to you to help support our family business. Thank you for using my links!

Хобби

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 103

@Quilt4Joy 20 дней назад

I like to put hand weights on the stabilizer to keep it in place, then put the top on. Works great!

@55sister 2 года назад

Becky, my husband says I can’t watch your RU-vid channel anymore,cause I want everything you use! 😂😂 I just brought home my new Brother 10 needle today, can’t wait to use it! You’re a great teacher!!

@PowerToolsWithThread 2 года назад

WOW!! Congratulations!!😊

@harveyhansen44 Месяц назад

You can do the same thing with Magic Clips and it’s a lot easier.

@tambravandal6386 2 года назад

Just used my new monster hoop for the first time 3 days ago, and I was so disappointed that I couldn’t my stabilizer taught at all! And now I see this…….once again Becky has a solution! Thanks girl! 🥰

@DigitalDesignsbyPJ 2 года назад

Yes I have had the Martelli ones for years but never thought about using them in that way. Good tip!

@janetdoby136 2 года назад

Love this idea. I have been watching and rewatching you all day because I’m being held captive by my recliner. I fell Saturday (on my way to sewing room) and broke my kneecap. Had surgery and can’t bend for six weeks. Will never get tired of your videos because I learn something new every time.

@alluraromel392 2 года назад

Heal fast & well Janet. I hope you have a comfortable recliner.

@karenammons5459 2 года назад

Thanks for the wonderful tip!

@marileetreat4403 2 года назад

I LOVE this tip!! Thank you Becky...👏🏻👏🏻👏🏻😍

@sharonclass4133 2 года назад

Wow! Great tip Becky. Thanks

@jesspeak7543 2 года назад

What a great idea Becky, thank you.

@jbl9848 2 года назад

Those clips are amazing! I have never heard of those. Thank you for sharing all your knowledge with us.

@mier6536 2 года назад

Thanks Becky. We can always trust you to have a quick and fast

@cabushka100 2 года назад

I’ve never heard of these, but another ingenious idea from you! Can’t wait to try this!

@scottydog6539 2 года назад

Great idea. Thank you for sharing.

@lvanorio 2 года назад

Ordered as soon as you demoed these. Thanks for all the great tips!!!

@patriciamccoppin6852 2 года назад

Thanks for the very useful tip.

@cindymcfarland4686 2 года назад

Good advice! Thanks for sharing.

@janejarvis6725 2 года назад

Thanks for a great idea for hooping

@tanyasullivan7540 2 года назад

That was such a great tip! I will order some and try it as soon as I receive them! Thanks for all you tips.

@RobinSmallen 2 года назад

Game changer….thanks!!

@staceytodd4491 9 месяцев назад

Awesome idea!!! Thanks!!!

@elizabethdunford6855 2 года назад

Brilliant! Thanks!

@sandyratter1688 2 года назад

You are brilliant.

@cherylmazzoncini280 2 года назад

Thanks for sharing this info what a great tool again you have helped with a real problem Again thank you

@sheilavetter2958 2 года назад

Have had these clips from Martelli for years and never tried this - great idea - thanks for all you share!

@martinpascale9700 Год назад

Yes fortunately some people find out how to manage this thing. I am so disapointed about this, because of the price and because of the loss of time spent while trying to put stabilizer en fabrics together. So frankly i don’t recommand this product. But… i do thank you for this excellent idea which will help me not to let duster engrave my hoop.

@countrychick 2 года назад

Wow! I'm having the same problem getting my stabilizer taught. Now I know what to do. Thanks Becky!

@conqueringmountscrapmorewi2509 2 года назад

Hello! I hope you are having a lovey day! I was working and filming in my sewing room all day and now I get to sit and watch you while I repair my blue jeans. I hope you have a great and creative week ahead. Thanks for sharing this video and your talent.

@cathypearson1889 2 года назад

Great idea!

@debbycloy1905 2 года назад

Love it.

@florenfroe23 Год назад

I ordered those clips from your Amazon store. They are great. Thank you.

@user-ky7hm4pz3u Год назад

thank you Becky for this demo. I was wondering how to get everything taut. July 2023, GMA

@jjivy6310 2 года назад

Good idea!

@barbrannnlm2271 2 года назад

Thanks so much Becky. I’m fairly new to the Snap Hoop and a little frustrated with the hooping. This will help sooo much I can tell. Barb from Buffalo 😃

@learjan4091 2 года назад

Great Idea, thanks.

@lindaalford2778 2 года назад

A+ problem solver. This will keep me from taping the stabilizers to the main frames. Awesome tip.

@melodymueller3149 Год назад

Thankyou so much for the Hack, I just got my Monster hoop and haven't used it yet. I love the chickens on the backboard .I love all your tutorials. And I love all my book covers you taught. I did figure the measurements for differant book sizes. Thankyou again

@debbieayres9176 2 года назад

I have used these clam clips with Fast Frames for years-work great and reusable.

@suedonnenwirth3269 Год назад

Thank you 😊

@alluraromel392 2 года назад

Those look like binder clips without the silver piece. I just bought a monster hoop for my Stellaire for a future edge to edge quilting class I’m hoping to take for the Hoffman big bloom panel. Thank you for all your videos. 💜❤️💖💕

@csdurch 6 месяцев назад

I saw another way to keep my stabilizer down when hooping. Lay the separator board over the stabilizer and then lay the edge of the hoop on the area next to the slider side. Gradually pull out the board until the hoop is all the way down. It works great, too!

@PowerToolsWithThread 6 месяцев назад

Yes, I demo'd this exact method near the end of the video. Great minds!

@sandyhearth8249 Год назад

Great idea! I have those clips!!

@lindaglenn6129 2 года назад

This is great information! Thank you for sharing. It always takes so long to tighten the stabilizer in the magnetic frame.

@coh93044 2 года назад

I just had that problem this AM using that hoop. Thank you for the tip. Off to Amazon!

@PowerToolsWithThread 2 года назад

amzn.to/3Eo5fT2

@remington6363 2 года назад

Great tip

@sharonfeatherstone8219 2 года назад

Becky to the rescue, again! I was frustrated by this very thing just the other day. Time to visit Amazon (again - LOL).

@PowerToolsWithThread 2 года назад

amzn.to/3Eo5fT2

@smokeydog67 Год назад

That’s awesome, I’ve had trouble and got to where I didn’t like using the hoops, tape does not work it would leave a sticky residue on the fabric depending on the tape you use, ugh! Thank you for the tip it will be very useful!

@constancedavies4699 2 года назад

Great idea Becky. Just ordered it now. Only18 left. I keep catching my fingers. I am hoping this will help save my fingers. Once you snap your fingers on that hoop, you won't soon forget it! Thanks Becky.

@carolbowser7334 9 месяцев назад

thanks for this video

@luvpugz9659 2 года назад

Genius!

@rebeccareed1874 2 года назад

These clips also work great for holding fabric wound on comic book board bolts for storage like so many people do. It's better than pins that pierce the fabric and could (eventually) leave rust stains or holes. The only down side is you need more clips, but you can buy refills easily.

@jillcaperton1568 2 года назад

I use the clamclip to hold binding on the quilt for hand sewing.

@suedonnenwirth3269 6 месяцев назад

Well I’ll be 😮

@ellenhofer3343 2 года назад

Genius.

@tinagordon6656 2 года назад

I used to use those for holding quilt binding in place while I hand stitched until I just started machine stitching all my bindings.

@lorenoakes3934 2 года назад

Quilt shop I go to uses those to hold bolt ends of fabric

@lindafox9005 2 года назад

Easy peazy lemon squeezy way to hoop that

@sherrymaylee8755 2 года назад

I have those with my Martelli zip binding system already

@carolynelliott9896 2 года назад

Taught is to teach which Becky does brilliantly! To hoop fabric nice & tight is to make the fabric taut! Look it up if you don’t believe me. And now I’m going to find Becky’s link for clam clips. I have the smaller clips (have had them for almost 30 years) bit I can’t find the clipper. Thank you Becky for refreshing my senior memory!!

@PowerToolsWithThread 2 года назад

Ha ha! I've edited the title to fix the spelling typo. I kept thinking that didn't look right. Thanks!😅

@jackiekraemer596 2 года назад

never have the issues using this hoop like u do

@meginmurphy9685 2 года назад

Another awesome tip! What's under your cutting table top if you don't mind sharing? I'm in the process of redoing my shop space.

@stephanieboik9078 2 года назад

My biggest is 9x14 Dime Magnetic Hoop

@terrypeppers8939 2 года назад

The “clam clip” has been sold by Martelli for years. That is where I got mine.

@vflsun 2 года назад

When I saw that, I thought Wow, I have something like that from Martelli. This will get me to pull it out and use that thing. lol

@Gatornanny 2 года назад

Beck you come up with the best ideas and solutions I have the Martillli cllips will they do the same

@sherrymaylee8755 2 года назад

I unfortunately had to return my monster hoop bcuz HV WON'T WARRANTY MACHINE IF ITS USED SINCE IT'S NOT HV :-( My next machine .....will be ok with it!

@judiththorpe2891 2 года назад

Great tip Thank you I was debating on getting that magnet hoop or the hoop that you can buy brothers, that help you do E2E, which do you think is better Becky

@PowerToolsWithThread 2 года назад

The DIME hoop is a little easier to get the next pass to begin in the exact right spot because you to make tiny tugs to the fabric and move it exactly where you want. You can't do that with the Brother hoop because the magnets are secured on an upside down V shape. Plus, it's about half the price.

@emmahenderson133 Год назад

I watched one of your videos (actually several) but in one of those videos I saw where you were using a Snap Hoop on your Brother Entrepreneur Pro X 1055X. I have the same machine and have a Snap Hoop, but my machine does not acknowledge the hoop. It gives me an error message that reads "This embroidery frame cannot be used". How did you get yours to work?

@PowerToolsWithThread Год назад

I load it into the right side first and then slide the left arm to my right until the arms of the hoop can snap into place. Then I think I load mine upside down. The hoop arm on my right side has the circle hole closest to me and the sideways U toward the back of the machine. I've found that the smaller knob on the left must be very tight for the machine to acknowledge the hoop and confirm the design will fit. Sometimes it tells me to switch to a larger hoop when I really don't need to. Once I tighten that screw (I guess there's a sensor there?) then everything is fine. If you continue to have trouble, please reach out to DIME.

@gmab4758 2 года назад

I went to amazon and I guess they are sold out? it doesn't say, but it also will not let me put in basket which I think means they are sold out. So, will go to my office supply store tomorrow and see if they have it there. I recently received my hoop from DIME (so excited, thank you for sending me there) and I was concerned about how to use it. I haven't used it yet.

@PowerToolsWithThread 2 года назад

I added another option to my Amazon Store.

@judieblue14 2 года назад

Great idea. But I had a different problem using my Monster Hoop the other day. I was quilting my project so I needed the hoop to hold my stabilizer, 2 pieces of fabric and some thin batting. The hoops didn’t hold all this firmly enough and my project continued to move out of position. Any clever idea on how to get a stronger hold?

@PowerToolsWithThread 2 года назад

This clam clip hack will work for that too. Have you thought of skipping the stabilizer and using the backing fabric as the 'stabilizer'? Then clam clip the entire project to the hoop base sandwiching the batting between the two pieces of fabric making sure the batting wraps around the frame. If you need to leave the clips on the frame, cover them with some paper tape so the metal edges don't scrape on the bed of your machine.

@judieblue14 2 года назад

Thx for your response. I used a soft no-show mesh stabilizer but perhaps that wasn’t necessary. I hadn’t considered leaving on the clips for fear of scratching my machine. Hmmm…food for thought. @@PowerToolsWithThread

@annettesmith8582 Год назад

So my Dime Monster snap hoop will allow the stabilzer to slip while sewing is there anything i can leave on that will keep it taut

@PowerToolsWithThread Год назад

You might put in a ticket with DIME to see if they know an easy solution.

@user-fg8db4br8o 3 месяца назад

Do you use this hoop on a Bernina?

@cherylgrider759 2 года назад

WHEN I WENT TO CLASS WITH THE FAST FRAME THEY HAD US USE STICKY STABILIZER , SO WITH USING THESE CLIPS YOU CAN USE ANY STABILIZER?😊😊😊😊

@PowerToolsWithThread 2 года назад

Sure! Any stabilizer will work.

@conniel.4601 2 года назад

I’ve had these for years. I don’t know where I put them!

@PowerToolsWithThread 2 года назад

Time to replenish! amzn.to/3Eo5fT2

@ftf652 2 года назад

Those look the clips Martelli’s use and they call them binding clips.

@leisaschwartz5554 2 года назад

Can you reuse thise clips?

@PowerToolsWithThread 2 года назад

Yes! Completely reusable! amzn.to/3Eo5fT2

@ivybichon8582 2 года назад

Where’s you’re Amazon link?

@PowerToolsWithThread 2 года назад

amzn.to/3Eo5fT2

@leisaschwartz5554 2 года назад

I cant find the clip things

@PowerToolsWithThread 2 года назад

Here you go amzn.to/3Eo5fT2

@trishvillarreal1920 Год назад

Li nk

@cyn4rest 2 года назад

I fold stabilizer over edge and use tape. Quick n easy. These ol hands cant handle the strong metal clips.

@0111vramj 6 месяцев назад

what a simple and easy solution. No other needed.

@marciabarsotti6377 2 года назад

"Taught" should be spelled TAUT in this instance.

@PowerToolsWithThread 2 года назад

Fixed! Thanks!

@marjroach3706 Год назад

Not everyone can afford the magnetic hoops. This is one of the reasons I stopped watching. Don't have a multi needle, or scan n cut, or magnetic hoops.

@PowerToolsWithThread Год назад

Hopefully you can pick up tips and tricks along the way to make do so you can make what you have work for you. Totally understand!