Тёмный

Old Soviet Motorcycle Engine Full Restoration Time Lapse And First Run 

BelarusCustoms
Подписаться 17 тыс.
Просмотров 621 тыс.
50% 1

In this video you will see restoration engine of USSR motorcycle Dnepr. And you will see full time lapse and first run this engine. Thank you for subscribe and like!
Dnepr is a motorcycle brand produced in Kyiv, Ukraine. It has been in use since 1967.
Motorcycles have been produced in Kyiv since 1946 at the Kyiv Motorcycle Plant (Kyivskyi Mototsykletnyi Zavod (KMZ), . Initial production was of a 98 cc two-stroke model that was confiscated from the German firm Wanderer as reparations. The original design for KMZ heavy motorcycles, and their cousin the IMZ, is taken from the pre-World War II German BMW motorcycle R71, which the Soviet Union licensed in 1940. The plant and equipment needed to make the M-72 (the Soviet derivative of the BMW R71) was transferred from the Gorky Motorcycle Plant (Gorkovskyi Mototsykletnyi Zavod, GMZ located in the city of Gorkiy (Nizhny Novgorod) in 1949. The first batch of M-72 motorcycles was produced in 1952 with the supply of 500 engines from IMZ. In 1958 KMZ replaced the plunger framed M72-N with the swingarm framed K-750. In 1964, KMZ introduced a military model, the MV-750 with a differential two-wheel drive to the sidecar wheel. In 1967, to celebrate the 50th Anniversary of the Great October Socialist Revolution, KMZ released their first OHV engine in the "Dnepr" K-650. Unlike the earlier sidevalve engines with their roller bearing crankshafts, this engine featured a sleeve bearing crankshaft as found in the World War II Zündapp KS750. The K-650 was superseded by model MT-9 650 cc, which was available in both solo and sidecar models (often referred to as the best "Cossack") as it was reliable and featured a new transmission with reverse gear and an automatic declutching mechanism incorporated into the riders foot pedal. The MT-10 was the first Soviet motorcycle to feature 12 volt electrics.
The Dnepr is famous for its off-road capability. Armed services models equipped with sidecars had two-wheel drive and as much as 15 cm (5.9 in) of ground clearance. The present engine is a 650 cc OHV boxer twin. Current models are fitted with engines ranging from the factory standard 650 to 750 and 1,000 cc.
Between 1973 and 1979 Dnepr was one of the makes marketed by Satra in the United Kingdom as Cossack motorcycles.[1]
Since demise of U.S.S.R. the factory had fallen on very hard times. Production decreased to only remnants of former glory. All shops were closed,[2] and machine tools were taken out of the city limits.

Опубликовано:

 

30 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 647   
@Endeavour6644
@Endeavour6644 3 года назад
Please never add music.
@milanv6969
@milanv6969 3 года назад
I’m happy that there isn’t some weird music👍
@domminion599
@domminion599 3 года назад
I rode one of these some years ago. It belonged to a friend of mine in the UK. At least I think it was one of there, a Ural Cossack. It was damaged in a flood near Carlisle. It spent 3 days up to its handlebars in water. About a week later it was on the road again. If theres ever a global war the only thing left will be cockroaches and these motorcycles!😂
@timjohnson1199
@timjohnson1199 3 года назад
Something to be said for the early stone age engineering. Simple, robust. I was able to rebuild my Triumph 250 from the sixties when I was young. Wouldn't even attempt my new Honda NC750X.
@АлександрЛодин-ю1я
Всмысли Moto go у тебя есть ещё один англоязычный канал?)
@minibikeaction4266
@minibikeaction4266 3 года назад
Dude knows that engine.
@shawnwiles5638
@shawnwiles5638 3 года назад
If you've ever worked on any kind any kind of engine....there pretty much the same with out gas or spark it just an air pump
@EtNran
@EtNran 3 года назад
It's also looks like bmw boxer engine...
@madera7170
@madera7170 3 года назад
Отличная работа, но я бы предпочел без покраски двигателя, а лучше обработать стеклоструем, как чётодел
@rokzd8247
@rokzd8247 3 года назад
четодел много денег вкладывает в технику, а нужно показывать как в гаражных условиях ремонтируют
@rokzd8247
@rokzd8247 3 года назад
а пескоструем? как
@IKucheINtortIE
@IKucheINtortIE 3 года назад
I love how you can just see that this is literally a bmw engine made and put together by russians
@m4x658
@m4x658 3 года назад
Russians??Its Ukrainian engine,made in Kyiv on a KMZ DNIEPR factory!!
@IKucheINtortIE
@IKucheINtortIE 3 года назад
@@m4x658 didnt know they switched factories after the war. The Ural Bikes i used to know were produced in Irbit or Moskow in Russia... but i think we can agree that soviets reverse engineered and built them from pre war bmw bikes
@theancienteternaloaktree
@theancienteternaloaktree 3 года назад
@@IKucheINtortIE my understanding, is that the Soviets bought the rights to the obsolete R71 pre-WWII, and started production then. But when Germany violated the Non-Agression Pact in 1941, all technical cooperation ceased, and further development after that was strictly Soviet. The original factories were in Moscow, Leningrad, and Kharkov. Production was moved to Irbit and Gorkiy later in the war, to avoid the invading Germans.
@deepakkumar977
@deepakkumar977 3 года назад
BMW engine
@belaruscustoms
@belaruscustoms 3 года назад
Soviet copy of BMW
@mouradguess9793
@mouradguess9793 3 года назад
@@belaruscustoms with the agree of BMW ?
@Bober_Hatake
@Bober_Hatake 3 года назад
До последнего не мог понять, Ярик или нет, но когда попал Зазоцикл в кадр, то сомнений не осталось.)
@alexfil_0333
@alexfil_0333 3 года назад
Яб и не подумал что он еще в таком формате снимает,хоть бы упомянул жук)
@Rich77UK
@Rich77UK 3 года назад
As a biker who has owned a ltd edition R1150GSA and Harley Davidson Fatboy in my time...Why do i find this (Ural?) engine so fascinating and want one???
@lordofrims
@lordofrims 3 года назад
Bike boxer/flat engines are cool... BMW has them, Honda has them...
@blackshuckthe3rd879
@blackshuckthe3rd879 3 года назад
BMW clone ???????????
@douro20
@douro20 3 года назад
@@blackshuckthe3rd879 Not quite a clone but still very similar.
@MotoTvWoodsFarm
@MotoTvWoodsFarm 2 года назад
designed to be repaired on farm track in the middle of nowhere with only the tools on the bike, got to love the logic of that. The trade off less power but you have something that will last. The tricycle I think is the one I would choose
@hdl4259
@hdl4259 2 года назад
Very nice engine, simular to the old BMW. The Russians had very good engineers that time. The sound of the engine is a paradisian music. Very nice, good job.
@КвестВК
@КвестВК 3 года назад
MotoGo трбоднепр????
@GWAYGWAY1
@GWAYGWAY1 3 года назад
Such a rip off of a BMW that BMW spares will fit them. They bought three BMW and literally copied them
@tsvetomirivanov9762
@tsvetomirivanov9762 3 года назад
Some older examples have original BMW parts in them. This engine is not just copied - it's taken with all tooling and parts to USSR after ww2. The newer ones are total crap.
@laoluu
@laoluu 3 года назад
I like best 2:47, when he touches the hot gearwheel. The only time he makes a sound.
@nightster6378
@nightster6378 3 года назад
Some guy in the comments thought there should be subtitles, I'm not sure why he needs oh ah translated, the sign language alone was enough to say it was hot. lol
@kailongridge7752
@kailongridge7752 3 года назад
How similar is this engine compared to a bmw airhead?
@ІванТеслюк-и5х
@ІванТеслюк-и5х 3 года назад
Ярик я тебя сначала и не узнал
@luxchusni8288
@luxchusni8288 7 месяцев назад
Saya suka motor Rusia tapi kenapa tidak di indonesia...padahal penduduk indonesia jumlahnya 280 juta jiwa...kenapa motor Rusia tidak ada..
@rocknroll6760
@rocknroll6760 3 года назад
Классно придумал делать видео и для не русскоговорящих)
@OoModnik
@OoModnik 3 года назад
Сразу же у меня закралось сомнение что это не американец и не Америка, в первые же секунды я понял по инструменту и по гаражу что это не Америка детка!
@giantglorovich5739
@giantglorovich5739 3 года назад
А что в америке как то особенно собирают моторы ??? С глянцем или с чем ?? Чем твоя америка лучше ???
@Online-Trading-
@Online-Trading- 3 года назад
Ну для такой дыры как Беларусь. это неплохо)
@bigcheese781
@bigcheese781 2 года назад
What are the copper pipes around the cylinders for? You going for a LQ-conversion?😉
@tudrow6087
@tudrow6087 3 года назад
Nice restoration ! Man that engine was built like a tank super tough.
@Oddman1980
@Oddman1980 3 года назад
If I must adjust the timing without the exhaust pipes, then Soviet.
@brandon2076
@brandon2076 3 года назад
good one
@Vinni_puh44
@Vinni_puh44 3 года назад
На иностранную публику лучше заходит да?)
@rokzd8247
@rokzd8247 3 года назад
тебе что не нравитса?
@___-dj2dw
@___-dj2dw 3 года назад
когда американцы покупают уралы, они потом так плюются не зная что с этим говном делать, насколько быстро они сыпятся
@Vinni_puh44
@Vinni_puh44 3 года назад
@@rokzd8247 все ок, просто знаю блогера очень хорошо, и это его второй канал.
@Vinni_puh44
@Vinni_puh44 3 года назад
@@___-dj2dw но им же интересно узнать о нашей технике
@rokzd8247
@rokzd8247 3 года назад
@@___-dj2dw эти новые тоже быстро сыпятса, там вроди двиг новый 750сс все усилено, или как?
@hannuhanhi183
@hannuhanhi183 3 года назад
Runs far better than a Harley....
@marcob4630
@marcob4630 2 года назад
Copied from BMW !
@dmitryfedorchenko882
@dmitryfedorchenko882 6 месяцев назад
Greetings, the fact is that this engine is designated as MT10-32 Dnepr, while a copy of the R-71 engine is the K-750 or M-72 engine.
@marcob4630
@marcob4630 6 месяцев назад
evidently BMW !@@dmitryfedorchenko882
@dismart5354
@dismart5354 Год назад
Блин как я сразу понял что это Moto Go😃
@paco_rider
@paco_rider 3 года назад
That starter motor itself can produce at least 50SP (soviet power)
@motolatvija1396
@motolatvija1396 2 года назад
My grandpa won a dnepr k650 in the 80s and now I restore this masterpiece
@lordmilord9180
@lordmilord9180 3 года назад
Мото го а что ты тут делаешь? Вернее как ты тут оказался? Ведь двиг давно в норме и вполне рабочий
@dmitryfedorchenko882
@dmitryfedorchenko882 3 года назад
Скорее всего, здесь даже не реставрация, а капитальный ремонт двигателя мт10-32 мотоцикла Днепр 11.
@rokzd8247
@rokzd8247 3 года назад
в чом разница между реставрацией и капремонт?
@aabeejan4238
@aabeejan4238 3 года назад
Unnecessary complicated engine, with lots of extra unnecessary parts. That's why people like vehicles made in JAPAN, so simple, easy maintenance and fuel efficient.
@riopermadi1966
@riopermadi1966 3 года назад
I have a 1984 Honda GL100. Still running very good and now head turner. All repair workshop can fix any problems ans all parts are abundantly available because they are still being used even for the latest production. I can even upgrade the capacity using newer generation's engine piston head if I want to. Just PNP. So I totally agree with you on that Japanese engine simplicity. 👍
@Veritas419
@Veritas419 3 года назад
It’s a copy of a BMW motor from the 1930’s.
@zveroboy4ik523
@zveroboy4ik523 3 года назад
Знакомы гараж... По проекту с Явой)))
@Евгений-г5х2ю
@Евгений-г5х2ю 3 года назад
Ага не один значит заметил)
@Vinni_puh44
@Vinni_puh44 3 года назад
Ну уж очень знакомый, даже перчатки рваные похожи ну 100% мотоgo 😁
@СергейГончаров-б1ь
Качество сборки близко к заводскому, т.е. - отвратительное. Всё равно скажем MotoGo:" Спасибо!" за то, что показал как НЕ НАДО собирать двигатель.
@СтудентМотоциклист
Нихрена себе я даже не думал что у тебя есть второй канал.
@SurpriseMechanics
@SurpriseMechanics 3 года назад
0:51 Whichever engineer designed that nut to be tightened like that was definitely put on Stalin's kill list.
@gibiskys
@gibiskys 3 года назад
Всадник распада СССР
@vladislavletyk8449
@vladislavletyk8449 3 года назад
Опа , а тут турбо днепр)
@ДмитрийШамрин-ш6й
@ДмитрийШамрин-ш6й 3 года назад
мото go ты ли это???
@ViktorAzLkS
@ViktorAzLkS 3 года назад
по ходу он))))
@karlayanetsandoval3105
@karlayanetsandoval3105 3 года назад
Another Sputnik V. Amazing restorátion..... saludos cordiales desde Tijuana baja California México!...
@dogshome7110
@dogshome7110 3 года назад
I'm pretty sure the BMW workshop manual doesn't specify "at least two sizes of hammer" :-) All good, nice video and the engine is obviously more refined than the Ural. Which needs more hammers....
@belaruscustoms
@belaruscustoms 3 года назад
Lol, thank you ;-)
@mauroscotti2577
@mauroscotti2577 3 года назад
Is easy whem you got new parts. 🇧🇷
@m3chanist
@m3chanist 3 года назад
Looks like you missed bending up the lock washer on the flywheel nut. 11:11. Yike. Looks like it will be a great bike though. Bend that washer..
@angelcesaraltamiranoaguila5438
@angelcesaraltamiranoaguila5438 3 года назад
Maquinas hermosas!!! Gracias por compartir!!! Fuerte abrazo desde Ciudad de Mexico!!!
@belaruscustoms
@belaruscustoms 3 года назад
Thank you!!!
@ramanvelayudham5496
@ramanvelayudham5496 3 года назад
Sir, The restoration hard work values of known only for few people's. But the restoration work done for LEGEND ONLY. this is by God gifted. Regards Raman India
@Времянесдержаных
@Времянесдержаных 3 года назад
Красава наш чел не одного лишнего движения
@PopsHowTo
@PopsHowTo 3 года назад
Very cool design, it looks very smooth and robust.
@lkwkategorie8445
@lkwkategorie8445 3 года назад
Copy soviet Bmw 😜
@riopermadi1966
@riopermadi1966 3 года назад
I was thinking the same... 😁
@ОстапХлян-д8о
@ОстапХлян-д8о 2 года назад
Ukrainian, Dnipro MT!)
@absurd_game892
@absurd_game892 2 года назад
Украинский😂
@alexserdukov1595
@alexserdukov1595 8 месяцев назад
@@absurd_game892а чий ще? Зроблено в Києві. Чи ти не знав як КМЗ розшифровується ?
@fitito500
@fitito500 3 года назад
Es todo a lo bestia, el tamaño de cada parte, el disco de embrague, los pistones el block...parece más el motor de un auto pequeño que de una moto bicilindrica
@rozzyretreat3300
@rozzyretreat3300 3 года назад
Looks like an engine that would last 2 decades tough
@TR5T
@TR5T 2 года назад
Just an assembly tip, use PVC pipe to install bearings as the plastic will put even pressure on the race and you won't be metal to metal, good job.
@justinbustin677
@justinbustin677 2 года назад
Shards of pvc hit you while hammering
@sergeyprikop4030
@sergeyprikop4030 3 года назад
Still waiting for new video ;)
@younorxa
@younorxa 3 года назад
Copy from BMW
@CREPOZOIDLEMORBIDES
@CREPOZOIDLEMORBIDES 2 месяца назад
BISOUS BONJOUR DE LA FRANCE BIENVENUE JAI ADORER JADORE VOS VIDEOS CONTINUER MERCI ET A BIENTOT
@ronwalsh
@ronwalsh 3 года назад
I would love to get hold of one of these engines. They look very tough and durable.
@lklk1997
@lklk1997 3 года назад
@Loli4lyf what do you mean? Are you saying that Japanese motors are bad?
@kcraig51
@kcraig51 3 года назад
Dang! That's the craziest engine I've ever seen! Super cool!
@HoodlumMedia
@HoodlumMedia 3 года назад
I think it's a BMW engine... If this is from a Ural, then it absolutely is. BMW supplied engines for Ural's sidecar motorbikes
@kcraig51
@kcraig51 3 года назад
@@HoodlumMedia I knew it looked BMW. I thought it was a knock off. Lol
@alexmgv3831
@alexmgv3831 3 года назад
Да, да тоже так на коленке, да на глаз, лет 35 40 назад возились. Именно "возились"-как жуки "Скарабей", ну кто понимает тот поймет в чем. Днепровские движки: набор проблем. От давления масла, до: плачет Девочка в автомате, но тогда альтернотив особо и небыло😭
@bertodiy
@bertodiy 3 года назад
no need to heat each newly replaced parts, it can weaken the metal and bearings making it brittle, anyways nice engine
@timjohnson1199
@timjohnson1199 3 года назад
Not if you do it right.
@ВладиславГабулаев
Подождите,это ж ведь MotoGo)))))
@АндрейНикитенко-ф4с
Красиво работал, приятно посмотреть. Монтаж видео тоже годный.
@BattlecatRed
@BattlecatRed 3 года назад
Fascinating and so well documented! Subscribed...
@belaruscustoms
@belaruscustoms 3 года назад
Tahnk you! ;)
@nitingehani5189
@nitingehani5189 Год назад
wow .. i watched the complete video your workmanship is really great and the end result is really pleasing and the most sexy thing is the engine sound .. that's satisfying .. great work .. loved it 😊
@mikejohnson5900
@mikejohnson5900 2 года назад
That's a beautiful motor!
@2-taktdiva
@2-taktdiva 2 года назад
Sovietische BMW ;-)
@grzegorzpalak6991
@grzegorzpalak6991 3 года назад
Great job guys ! Would love to have bike like this in US , cheers
@Andrenalin77
@Andrenalin77 3 года назад
My grandpa had Dnepr motorcycle in 80-th, and I used to wash all parts of this engine not once.
@Oldbmwr100rs
@Oldbmwr100rs 3 года назад
I had the questionable pleasure of working on a few old post soviet ural models, and see the Dnepr was at least better in that it used full length cylinder studs and the rocker shafts were supported in the heads with cast in bosses. Interesting centrifugal oil filter, too. Later the Ural engine went through major designs to be able to survive in western markets, overall making it a far more durable bike. This Dnepr design with plain bearing crankshaft, full length cylinder studs and alloy cylinders is far closer to later BMW construction, surprised they didn't make it here instead of the Ural.
@johngillon6969
@johngillon6969 2 года назад
i have a 1975 Dnepr, and you work on it for a week and drive it for thee hours. and repeat.
@Musik_Malam
@Musik_Malam 3 года назад
Its looks like an airplane engine
@douro20
@douro20 3 года назад
The original design was from BMW. BMW made aircraft engines before they made motorcycles.
@Mrbumbons1
@Mrbumbons1 3 года назад
That oil was clean.
@nelinse
@nelinse 3 года назад
Зашёл посмотреть, как же иностранец соберёт Днепра, потом увидел запененые ворота и понял -не увижу :) а оказалось, что и чувак то весьма знакомый :)
@eliasaxelson1411
@eliasaxelson1411 3 года назад
BMW copy as usual with Russians!
@battlefield1soldier929
@battlefield1soldier929 3 года назад
So why are you watching?
@alexandremagnomagno670
@alexandremagnomagno670 3 года назад
muito bom mesmo, gostei, quem sabe faz ao vivo. qual a possibilidade de ter um motor deste aqui no brasil?
@jaxs2384
@jaxs2384 3 года назад
This engine is just like a porsche's engine for motorcycle
@TheAsheybabe89
@TheAsheybabe89 3 года назад
Close, it’s a BMW clone
@timjohnson1199
@timjohnson1199 3 года назад
I want a Ural sidehack with the gun mount.
@24juan68
@24juan68 2 года назад
Raw power! How beautiful 🤩
@РомаЛиходей
@РомаЛиходей 3 года назад
Я штанги запихывал всегда в трубки, никогда не разбирал голову)
@smondal1463
@smondal1463 11 месяцев назад
Copy of German bmw
@andyn9907
@andyn9907 7 месяцев назад
False, the old Ural m72 engine was the Copy from BMW.
@CHIBA280CRV
@CHIBA280CRV 3 года назад
Nice job , it would have been nice to have polished the case instead of painting it black..at least it runs.👍
@lordmilord9180
@lordmilord9180 3 года назад
I have a video on my channel with a Sovetsky Motorcycle Ural. And here on the video motor Dnepr is not a big difference.
@ДмитрийДемчук-б9о
@ДмитрийДемчук-б9о 3 года назад
Ооуу, турбоднепр, а с Явой когда видос? 🧐
@Desconocido1013
@Desconocido1013 3 года назад
Vodka Davidson
@Kozachuk_T
@Kozachuk_T 3 года назад
horilka-davidson. This is a Ukrainian-made engine :)
@Desconocido1013
@Desconocido1013 3 года назад
@@Kozachuk_T Ok, horilka-davidsonky 😁
@rebekahfrench5747
@rebekahfrench5747 3 года назад
Not everyone has a completely fitted out shed.. one must improvise with what you have at hand.. gas torch makes life easier when you have no press.. great work carry on..👍👍
@zafaradil3548
@zafaradil3548 3 года назад
WHAT A SOVIET ENGINEERING ! ! ! ROUGH TOUGH AND ROBUST PRODUCTS.SPECIALLY I LIKE THE SIZE OF SELF STARTER ! ! !
@studentsucesspoint
@studentsucesspoint 3 года назад
Wow what a bike engine
@chucklucas8747
@chucklucas8747 2 года назад
Looks like they just kept adding on it till it work
@ИванПутинов-ю3у
@ИванПутинов-ю3у 3 года назад
Посморев это Хагерти решил удалить свой канал )
@riccs93
@riccs93 3 года назад
This engine is from an Ural motorcycle?
@VOSHOD5828
@VOSHOD5828 3 года назад
Dnepr
@jasonbell5905
@jasonbell5905 3 года назад
That’s an impressive clutch and gearbox
@adamchristoff4905
@adamchristoff4905 3 года назад
All the better for pulling incredible loads on less than perfect roads
@christianguenther1276
@christianguenther1276 3 года назад
A mechanic with BMW Boxer motor experience would be able to work on that engine too.
@747ZEPP
@747ZEPP 2 года назад
Stared up on the 4th kick, freaking awesome dude.
@Matthews_Media
@Matthews_Media 3 года назад
Nice video! Will you tell me what the copper tubing between the cooling fins are for?
@xdabus
@xdabus 3 года назад
oil cooling i imagine
@garydurandt4260
@garydurandt4260 3 года назад
What is the purpose of the copper tubing wrapped around the cylinder heads?
@belaruscustoms
@belaruscustoms 3 года назад
Coolant will flow through copper pipes around the cylinders.
@MariaEngstrom
@MariaEngstrom 3 года назад
Cool, that's more like a small car engine than a motorcykel engine. Bet it is very reliable.
@captainfecc2526
@captainfecc2526 3 года назад
I used to have a Dnepr, it was a mistake to sell it, my friend restored the whole engine and gearbox. But I still have my Ural bobber which is waiting for the same repairs. That copper coil on the cylinders seems to be a self-made cooling system. I hope you show that interesting stuff in the next video.
@catthecommentbothunter6890
@catthecommentbothunter6890 3 года назад
The name of that engine is OUR TWO CYLiNDER EnGINe
@termostat363
@termostat363 Год назад
Этот прекрасный чудесный звук
@СергейГлавацкий-т5п
Скажите пожалуйста, что за медная трубка вокруг цилиндра?? спасибо.
@ПавелКостерин-к6т
@ПавелКостерин-к6т 3 года назад
Вот мне тоже интересно!!!!
@ДенисРаев-ы2б
@ДенисРаев-ы2б 3 года назад
канал MotoGo он строит турбо днепра, вобщем , перейди посмотри, довольно таки интересно, а трубка это что то вроде жидкосного охлаждения
@mjoelnir58
@mjoelnir58 3 года назад
Sovietunion never licensed anything from BMW or other german companys,BMW delivered some of these machines to UssR,seems they got indeed paid for it, these then were copied.No pay for that of course.Same with Leica cameras,copied without any payments to the original owner of rights.
@TheAsheybabe89
@TheAsheybabe89 3 года назад
So as the Chinese do now, the Soviets did then. Intellectual property isn’t a concept to commies
@battlefield1soldier929
@battlefield1soldier929 3 года назад
@@TheAsheybabe89 So why tf would you be watching this in the first place then?
@TheAsheybabe89
@TheAsheybabe89 3 года назад
@@battlefield1soldier929 what does Soviets cloning a bike have to do with me appreciating a modern Belarusian guy making a custom bike?
@battlefield1soldier929
@battlefield1soldier929 3 года назад
@@TheAsheybabe89 Calling them all "commies".
@TheAsheybabe89
@TheAsheybabe89 3 года назад
@@battlefield1soldier929 the Soviets and current Chinese are both self described communists! And they both had zero respect for intellectual and copy other’s products freely without paying a dime in royalties. These are non controversial objective facts
@BobfmBali
@BobfmBali 3 года назад
Great to watch and not too much commentary 😂😂. He makes it all seem so easy 😂😂😂
@ClosestNearUtopia
@ClosestNearUtopia 3 года назад
nice engine, nice sound, very brutal:D
@koningbolo4700
@koningbolo4700 3 года назад
10:32 What are the copper brake lines for which are wraped between the cooling fins? Are you planning a heating system of sorts??
@stolamal
@stolamal 3 года назад
Im wondering the same
@koningbolo4700
@koningbolo4700 3 года назад
@@stolamal Maybe he is planning an additional water cooling of sorts...??
Далее
Restoration of Old Soviet Engine URAL (Part 1)
15:51
Просмотров 174 тыс.
11 ming dollarlik uzum
00:43
Просмотров 1,3 млн
Full Restoration 60 Years Old Ruined Classic Motorcycle
42:47
Full Build Soviet Motorcycle With Engine From Car
17:56
1930s Gearbox Bike - Restoration
33:58
Просмотров 4,8 млн
1963 Lambretta Engine Restoration - Timelapse
19:34
Просмотров 744 тыс.
Двигатель Днепр 1700сс - Сборка
16:30