OMP Hobby M1 EVO Spektrum Radio Setup 

Nice! The only two comments I have. One, when I was using Spektrum I found a little trick to avoid using a FBL or a receiver. It takes patience and some trial and error. If you slowly plug in the connector to the powered heli, without pushing it all the way, you will find at one point it will go into bind mode. This is what I always did with my Spektrum DSMX receivers. Second, as a best practice I set HOLD and THROTTLE CUT to the both rear switches. I use Hold on the same switch you use, but then on the left back side I assign Throttle Cut. This prevents accidental spool up if you happen to bump the switch when you are walking back from the flight line. Yes, I speak from experience. The heli won't spool up unless BOTH are disengaged. I usually flip Hold to land on a soft baby auto, then hit Throttle Cut and start walking towards the model.

Thanks for the vid. Helped me out with setup.

I'm watching it now! Ugh...iX20 radio quite different than my NX-8 though.

I believe this thing is going to have FPV with action cam full-HD videos posted on RU-vid in just a few years from now.

Really appreciate your video, thanks a million. Also you didn’t mention anything about D/R and Expo setup for the M1 Evo, any chance you could send a link for this info or give me your thoughts on the setup for this. Cheers Steve.

When are you gonna do a flight on the fireball

Great same always 🙏,I have m2 Evo .I’d like to know which items I should considering or change if I wanna follow this setting?

Just got a used ix20 from ebay. The price was a killer

So I'm super new to the hobby, I just got an NX8 controller. And I'm going to buy this helicopter. At 7:05 you mentioned something about a king sun receiver with a bind button. What is that? Thanks for your help!

Its better to just have normal with a flat curve and keep pitch the same so you can fly nomally, still do 3D (low rpm) & not have to worry about shutting the motor off because of the curve having a 0 value. Having unstable rpm in a heli is generally not good either.

CAN u help? So I got the "Radiomaster Zorro" along with the M1evo (SFHSS) and I got them all bound together. How do I tell the M1evo's flight controller that when I trigger a certain switch, do a specific action? The "mixes page" doesn't really do much. TO be more clear, if we're talking about FPV drones, we have to use "Betafliight" and under the "modes" tab, we can setup say arm, to be on a certain "AUX" switch. M1evo's flight controller can't connect to betaflight? so how do I tell it that I want said "AUX" switch to be "arm or disarm," or do "normal or acro" mode?

Thanks for posting this excellent video. Getting back into helis after 15 years and the M1 is my first flybarless model. If the heli won’t stay in one spot while hovering ( in any mode) is it ok to use aileron and elevator trim on the transmitter ? Thanks.

Surprised to see no rate/expo assignment unless I missed it? I assign/add that to my M1 and M2’s etc. All of my helis have rate (sport, 3D etc) on a switch and the head speeds on a separate switch. Also the auto level I do on a separate switch. Good video though.

Nice :) How can a SPM9745 be connected to a current receiver (e.g. AR6610T) if I do not have an old Spektrum receiver? Which port or which pins should I use on the receiver? XBUS?

Is a satellite with SRXL2 an option? Does an SRXL2 DSMX Serial Micro Receiver work with the OMP M1 EVO??

So with the kensun, you don't need the receiver? Just push the bind button and then plug it into the heli?

Is it possible to set up panic mode on this?

I got the Kensun Satellite w/ bind button so I won’t need the whole bit about binding to a spektrum receiver first correct? Thanks!

is it somehow possible to receive telemetry on the M1 with a spectrum transmitter? (Have an NX8)

Great video! Thank you. I have two questions. I have a DX8 gen 1. What gyro settings do I need to assign? And if I understood correctly you set all your D/R on 100% and no expo correct? Thx! Franz

Hi. Will these settings be the same on Align T15?

Does the tail curve, gyro, governor settings have any effect? I'm on original DX8. Also, I have the gear switch right behind the f mode switch. Does flipping gear switch change the stability mode or is it only fmode switch?

First!

Hi how do i disarm failsafe ???

If you have someone fly like grandpa......you haven't realised that you are grandpa yourself bro and in age and still flying lower than medium.....with love 😘 and spectrum sucks Vcontrol is for pros and Futabas also lot better than spectrums.....i still use beastx in some of my helis but Neo is the best right now unit and reciever at same time with telemetry etc......i just wonder to what kind of audience are you making the videos? Kids? Old people who retired from work and search for hobby? Who? ....... don't forget always with love 😘

You will get problems with your normal mode... Because it's not completely 55%

It's the eggplant